Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   5th Generation Maxima (2000-2003) (https://maxima.org/forums/5th-generation-maxima-2000-2003-7/)
-   -   What do you do to make your engine look pretty? :) (https://maxima.org/forums/5th-generation-maxima-2000-2003/617908-what-do-you-do-make-your-engine-look-pretty.html)

doublea 09-18-2010 10:46 AM


Originally Posted by knight_yyz (Post 7739302)
all that work and no aluminum rad?

Before I replace the rad, I was looking all over the place for an all aluminum rad, and couldn't find one.

It's something I would definitely do sooner or later, but just the new fans I wanted are like 400-500$ so at some point I had to move on.

QnzMax 09-18-2010 01:47 PM


Originally Posted by Rochester (Post 7737963)
I just found a local powdercoating shop that will bead-blast my FSTB brackets and powdercoat them in "Black Chrome", which is this awesome gun-metal color... for only $25!

My polished titanium strut nuts will be showing up next week. Together with these reborn brackets, my strut towers should look amazing.

I'm very psyched for this. Pictures late next week.

Woah! $25 is very, very cheap. Extremely interested in the outcome. Looking forward to the pictures.

Here's my engine bay after about an hour this morning (sorry for the picture quality, a blackberry can only do so well):

Don't mind the engine cover, its going to be sanded down, taped perfectly and redone with the V6 3.5 in black. If anyone happens to have a spare Nissan emblem that goes on the engine cover, let me know!

http://i76.photobucket.com/albums/j3...00918-1651.jpg

http://i76.photobucket.com/albums/j3...00918-1652.jpg

All I did today was clean the area with some de-greaser, turn the MAF around so you can't see the connector, clean all the caps, paint the radiator support things and polish the AC line and mid-pipe.

Rochester 09-18-2010 02:26 PM


Originally Posted by QnzMax (Post 7739553)
anyone happens to have a spare Nissan emblem that goes on the engine cover, let me know!

The emblem can be purchased at your dealership's parts department. However, take note that it's parted out for the Altima... it's not in their system for the Maxima.

If I remember correctly, I paid $20 for it new. Part #14048-5Y710

Bay looks good, QnzMax. I'm working on my AC pipe today, too... grinding down and repainting the retention bracket bolted to the side of the strut tower.

Rochester 09-18-2010 02:31 PM

Guys... Meguiars Metal Polish works wonders on things like the main AC pipe, the Intake Manifold, the Throttle Body, the AC return line, the VIAS delete block plate, the brake master cylinder, etc.

You don't necessarily have to sand down the IM in order to get it polished clean. It will still have that rough surface, but after Meguiars Metal Polish and some elbow grease, it will positively gleam. I swear it.

http://meguiarsdirect.com/imagesEdp/p84825b.jpg

byrdman164 09-18-2010 02:35 PM


Originally Posted by Rochester (Post 7737963)
I just found a local powdercoating shop that will bead-blast my FSTB brackets and powdercoat them in "Black Chrome", which is this awesome gun-metal color... for only $25!

My polished titanium strut nuts will be showing up next week. Together with these reborn brackets, my strut towers should look amazing.

I'm very psyched for this. Pictures late next week.

Not to threadjack, but if anyones local and interested in powdercoating, my friend has a shop in Plainview (LI, NY). Figured it'd be relevant with all this underhood customization haha. Check out http://www.elitecoatingsny.com/ if anyone's interested. Mention you're part of the forum and they'll give you a 10% discount also. Feel free to PM me with any questions.

QnzMax 09-18-2010 02:51 PM


Originally Posted by Rochester (Post 7739616)
The emblem can be purchased at your dealership's parts department. However, take note that it's parted out for the Altima... it's not in their system for the Maxima.

If I remember correctly, I paid $20 for it new. Part #14048-5Y710

Bay looks good, QnzMax. I'm working on my AC pipe today, too... grinding down and repainting the retention bracket bolted to the side of the strut tower.

Ah, thanks for the info. I'll be ordering one today.

By the beginning of October I want to have it gleaming. Nothing a few hours of elbow grease won't cure.


Originally Posted by Rochester (Post 7739631)
Guys... Meguiars Metal Polish works wonders on things like the main AC pipe, the Intake Manifold, the Throttle Body, the AC return line, the VIAS delete block plate, etc.

You don't necessarily have to sand down the IM in order to get it polished clean. It will still have that rough surface, but after Meguiars Metal Polish and some elbow grease, it will positively gleam. I swear it.

http://meguiarsdirect.com/imagesEdp/p84825b.jpg

I used Mothers Aluminum polish on the AC pipe and the mid-pipe and it worked well. I'm sure the Meguiars metal polish works better though. I'll have to pick some up and give it a shot on the IM. I tried the Mothers on it and it didn't come out very well, just a slight shine.

Rochester 09-18-2010 03:19 PM

In addition to painting the AC bracket, I spent some time on the battery area today. The tray was filled with dirt (and rust). I cleaned it up best I could, cleaned the plastic tray liner, and polished the tie-down posts.

And then I had an idea about the battery itself, thinking that the large white "This is a battery" stickers were kind of dumb. So I took them off, cleaned up the housing, and finally found a home for my HAWK and Unorthodox Racing stickers.

Before:

http://www.johnclare.com/pics/cars/battery_before.jpg

...and after:

http://www.johnclare.com/pics/cars/battery_after.jpg

Rochester 09-18-2010 04:02 PM


Originally Posted by QnzMax (Post 7739654)
I used Mothers Aluminum polish on the AC pipe and the mid-pipe and it worked well. I'm sure the Meguiars metal polish works better though. I'll have to pick some up and give it a shot on the IM. I tried the Mothers on it and it didn't come out very well, just a slight shine.

I didn't think I could get happy with my IM without doing what jowo9 did, which was to remove it, sand and polish. (Remember the OP? Good grief, I've whored the heck out of this thread. :nervous: Ug.)

But honestly, Mequires does a nice job on it. And if you don't mind the bumpy surface, I think this is totally acceptable.

http://www.johnclare.com/pics/cars/intake_polished.jpg

knight_yyz 09-18-2010 06:13 PM

to get the same effect you can just dip the upper in some drano and water. it will act like an acid and remove the outer layer of aluminum. Don't leave it in too long or you won't have an IM left. LOL.

cjandura 09-18-2010 06:38 PM

Has anyone tried the home powder coating kit from sears/craftsman looks like all you need is the kit for $119 and a old oven?

jowo9 09-18-2010 07:55 PM


Originally Posted by Rochester (Post 7739726)
I didn't think I could get happy with my IM without doing what jowo9 did, which was to remove it, sand and polish. (Remember the OP? Good grief, I've whored the heck out of this thread. :nervous: Ug.)

But honestly, Mequires does a nice job on it. And if you don't mind the bumpy surface, I think this is totally acceptable.

http://www.johnclare.com/pics/cars/intake_polished.jpg

Yeah, hey, remember me??!!! Haha jk :D yeah I like my polished IM:) but that looks good too!!

rroderiques77 09-19-2010 09:50 AM


Originally Posted by doublea (Post 7739366)
Check the company website: www.coolflex.com
It was a bit expensive but now I know why.

Thanks.

Rochester 09-19-2010 04:39 PM

Passenger-side ABS Sensor wire tuck behind the PS Reservoir retainer bracket.

http://www.johnclare.com/pics/cars/abs_tuck_after.jpg

jowo9 09-19-2010 04:56 PM


Originally Posted by Rochester (Post 7740919)
Passenger-side ABS Sensor wire tuck behind the PS Reservoir retainer bracket.

http://www.johnclare.com/pics/cars/abs_tuck_after.jpg

Hey I was gonna do that a few months ago! What did you use to cover the holes?

QnzMax 09-19-2010 04:57 PM


Originally Posted by Rochester (Post 7739726)
I didn't think I could get happy with my IM without doing what jowo9 did, which was to remove it, sand and polish. (Remember the OP? Good grief, I've whored the heck out of this thread. :nervous: Ug.)

But honestly, Mequires does a nice job on it. And if you don't mind the bumpy surface, I think this is totally acceptable.

http://www.johnclare.com/pics/cars/intake_polished.jpg


:eek:

What did you polish that with? Just some paper towels?

Rochester 09-19-2010 05:04 PM


Originally Posted by jowo9 (Post 7740944)
Hey I was gonna do that a few months ago! What did you use to cover the holes?

Hole plugs. Go to LOWES, in the nuts & bolts section. They've got all kinds.

It was a good opportunity to do some clean-up, too. I reconditioned the rubber spacers with silicone and armor all. Then I ground down the washer/spacers, primed and painted w/engine primer/paint. And the bolts themselves were ground down on the wire wheel. Although I might replace them with some new SS parts. IDK.


Originally Posted by QnzMax (Post 7740946)
:eek:

What did you polish that with? Just some paper towels?

Blue shop towels, actually... but yes, simple paper towels and Mequires Metal Polish. I recommend wearing disposable gloves when messing with Metal Polish. You can pick up a 50ct box at any drug store.

QnzMax 09-19-2010 07:10 PM


Originally Posted by Rochester (Post 7740957)
Blue shop towels, actually... but yes, simple paper towels and Mequires Metal Polish. I recommend wearing disposable gloves when messing with Metal Polish. You can pick up a 50ct box at any drug store.

Weird how the most simple things work so well.

I work in a pharmacy so I always have a ton of latex gloves that I don't have to pay for:cool:.

knight_yyz 09-20-2010 05:21 PM

Theses still have a little more work to go... SO far they have been stripped of the crap nissan e-coat, then degreased with por 15 marine clean, soaked in por 15's metal ready to zinc coat them. Then 2 coats of por 15 rust proof "paint" They need to cure and I will paint again with the por 15 hardnose paint. Ne effen way are these going to rust again. LOL

http://i400.photobucket.com/albums/p...z/DSC_2063.jpg

Upper coolant pipe which holds the o2's, lower coolant pipe, oil cooler pipe passenger side and oil cooler pipe rear.

Rochester 09-20-2010 06:05 PM

I was just thinking of getting the new pipes, having them blasted, then prime and top-coat with engine paint. You know, simple stuff. What you did... damn, those are going to outlive the rest of your car, Ray. Some archeologist is going to dig up those pipes and wonder what kind of car they belonged to.

Impressive thoroughness, that's for sure. PM me when you install the 2 main water pipes. I'm curious how easy that is.

knight_yyz 09-20-2010 07:01 PM

For sure, I'll post more pics when they are done and installed with the new hose.

Also giving the same treatment to the lower oil pan and the engine crossmember. No pics yet though

Rochester 09-24-2010 01:54 PM

Just got my FSTB brackets back from the powdercoater. Sure do love that "black chrome" paint.

Still waiting on some titanium strut nuts (from DressUpBolts.com) before I reassemble.

http://www.johnclare.com/pics/cars/f...wdercoated.jpg

zero2sixtyZ 09-24-2010 02:53 PM


Originally Posted by Rochester (Post 7747877)
Just got my FSTB brackets back from the powdercoater. Sure do love that "black chrome" paint.

Still waiting on some titanium strut nuts (from DressUpBolts.com) before I reassemble.

http://www.johnclare.com/pics/cars/f...wdercoated.jpg

That looks really good. I want to get my wheels done in that finish.

Grand_hustle17 09-24-2010 02:53 PM

daaaamn, talk about details

spock 09-24-2010 03:55 PM

Damn, Rochester. You must have some free time! Nice job on the details, but with winter just around the corner? Are you planning to keep the car?

Rochester 09-24-2010 06:19 PM


Originally Posted by spock (Post 7747958)
Damn, Rochester. You must have some free time! Nice job on the details, but with winter just around the corner? Are you planning to keep the car?

IDK about free time. Seems I can't be in the garage for more than 5 minutes before I hear someone screaming, "DA-A-A-AD!!!"

The plan is still to keep the car until Spring 2012. That hasn't changed.

knight_yyz 09-24-2010 09:17 PM

Got some goodies in the mail this week...

http://i400.photobucket.com/albums/p...z/DSC_2083.jpg

rroderiques77 09-24-2010 11:56 PM


Originally Posted by Grand_hustle17 (Post 7747925)
daaaamn, talk about details

Details win trophies...

Rochester 09-25-2010 05:22 AM


Originally Posted by knight_yyz (Post 7748192)
Got some goodies in the mail this week...

http://i400.photobucket.com/albums/p...z/DSC_2083.jpg

Are those all blue? Blue bolts... blue hoses... you really are going for a theme.

Remember to use t-bolts on those large radiator hoses.

http://www.johnclare.com/pics/cars/tbolt_rad.jpg

knight_yyz 09-25-2010 08:41 AM

yes it's all blue... t-bolts are in the mail. I ordered some but silicon hoes have a smaller diameter and the clamps I ended up with are too big. Smaller ones in the mail.

Rochester 09-25-2010 08:48 AM


Originally Posted by knight_yyz (Post 7748411)
I ordered some but silicon hoes have a smaller diameter...

I didn't know that about silicon hoes. :spit:

http://www.johnclare.com/pics/cars/silicon_hoe.jpg

Rochester 09-25-2010 01:06 PM

I received a box of nuts & bolts today from DressUpBolts.com.

There are 4 readily accessible "fender bolts" in our car, bolting the front fenders to the frame. They're kind of inconspicuous because they're painted the same color as the car. (That would be the two bolts in back in this photo.)

But they look much better replaced with stainless steel buttoncaps and stainless steel, rubber-backed washers:

http://www.johnclare.com/pics/cars/fender_bolts.jpg

Mr. Brett 09-25-2010 01:24 PM

Your guys' engine bays make me jealous..

But at the same time, they've inspired me to get off my dead butt and make something of mine. :D

Only pics I have right now:

http://sphotos.ak.fbcdn.net/hphotos-..._1713219_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._5724628_n.jpg

I'll get more when I find my camera...

Rochester 09-25-2010 08:14 PM

Here's a pretty good before/after example.

This was my Racingling FSTB bracket, like maybe half a year ago. The bracket was chipped with flaking paint, and the nuts were rusty.

http://www.johnclare.com/pics/cars/fstb4.jpg

And here is my FSTB bracket tonight. The bracket was powdercoated, and the nuts are polished titanium.

http://www.johnclare.com/pics/cars/fstb6.jpg

I have to say, I'm pretty content with the way this turned out. :D I'm feeling like I want to find something else to powdercoat.

Here's the passenger side:

http://www.johnclare.com/pics/cars/fstb7.jpg

maximase86 09-25-2010 08:42 PM

This was the nicest engine bay I had on a car:

http://i38.photobucket.com/albums/e1...a/c33b7f19.jpg

Rochester 09-25-2010 08:45 PM

World's smallest Energy Suspension decal... can you see it?

http://www.johnclare.com/pics/cars/es_decal.jpg

bryan163 09-27-2010 07:32 PM

http://www.johnclare.com/pics/cars/fstb7.jpg
That looks killer^^^

Rochester 09-28-2010 05:36 AM


Originally Posted by bryan163 (Post 7751455)
That looks killer^^^

Thanks, Bryan!

I've got the itch to powdercoat my Radiator tie-downs and the PS Reservoir bracket in "black chrome", but I also need to drive my car. That, and I'm starting to get burned out on this engine bay project.

And I see winter coming down the road. :nervous:


Originally Posted by malifat (Post 7751515)
gunk

:scratch: It's almost as if months of conversation and photos never happened.

Rochester 09-29-2010 04:18 PM

I received some Password-JDM Fender Washers in the mail today. Basically, they're Stainless Steel, M6x20mm, countersunk allenheads with an aluminum, anodized collar. The word "Password-JDM" is etched across the top in English and Japanese... which kind of sucks, and won't come off. But otherwise, they're pretty cool.

I've been using 4 of them in red, 2 for each headlight tie-down, seen here:

http://www.johnclare.com/pics/cars/dressup_bolts.jpg

I got to thinking they might look good when used for the engine cover, so I moved them around.

Turns out I liked the bolts, just not the red. So these I bought in black.

http://www.johnclare.com/pics/cars/password_jdm_1.jpg

When looked at up close, they have a nice, edgy detail. Very clean (logo notwithstanding). It's a slightly raised, flushed look against the cover.

http://www.johnclare.com/pics/cars/password_jdm_2.jpg

And then when you step back, it blends instead of popping out at you like the red collars would. It's far more subtle. I think I like the look.

http://www.johnclare.com/pics/cars/password_jdm_3.jpg

Rochester 09-29-2010 04:30 PM

Still lots of things I want to do with the engine bay and clean-up... but I'm pretty happy with where it's going, considering 8 years of winter driving.

I figure, when next Spring comes around, cleaning the engine bay should be as easy as a shop-rag, some armor all, and and a bottle of detailing polish.

http://www.johnclare.com/pics/cars/d...essup_map1.jpg

Rochester 09-30-2010 04:06 PM

Just realized that these Password-JDM fender washers actually do look good in red on the engine cover... when the ones on the headlights are black. It was the all-red look that was distracting. So I swapped my bolt collars.

Also just figured out that 20mm countersunks are measured from the flat top of the bolt, and not the tapered edge. So if anyone gets these things for your engine cover, think about replacing the bolts with 25mm versions. Check the web for retailers. There's chrome, and polished titanium...

http://www.johnclare.com/pics/cars/enger_cover_red.jpg

http://www.johnclare.com/pics/cars/password_jdm_red.jpg

http://www.johnclare.com/pics/cars/p..._jdm_black.jpg


All times are GMT -7. The time now is 08:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands