It was less than 300 bucks I don't recall the exact amount .
If you soak the bolts the night before you install in PB blaster or similar should take 2-3 hours give or take...

 

obx

 

would these fit on a 02/03 max?

 

I would say they fit 02 03 because I dont see an egr pipe. But that can be just an illustration.

 

It was bellow 300. If I remember right it was like 250 because it is 30 percent of only the headers not he shipping or anything else. Please call him to work out the details. He will explain in full. You can tell he doesnt mind the call or questions at all. We would alllll love you for getting this group buy moving. Just be open with him about what you have now and when you will have the rest. He will tell you if it will work or not. He also informs you of any charges before they happen.

 

can someone post a link for the raceline converters..

 

Will I need O2 simulators for my Cali spec with these headers?

 

Not without a custom y pipe.

 

From what I gather the best thing to do is to try to install all the o2 sensors as is on cattmans headers and if your good your good if you pop a light then go out and get the o2 sim. If you pop the check engine right away nothing is harmed other then a light in your eye and needed to get the sim before emissions testing. Drivability remains the same.

 

Was this on jack stands or a lift? Would wheel ramps be good enough?

 

Ramps should be good enough . I am going to use ramps when I install my set. As far as time to install You need to consider that every car will be different. A car from Texas with 60k will be easier that a 175k car from the northeast (where I'm from) But I have a dremel so old rusty bolts don't scare me.

 

Whoever puts in this last order required to get production rolling will be very much loved and appreciated by those of us who are waiting Come on guys!

 

+1

 

I got the bug and I am wayyy too impatient to wait for these. I wonder if other forums are aware of this great product.

 

I don't know what other forums are out there but I posted a link to this thread on nissanforums.com although the 5th gen Maxima section over there looks dead lol.

Patience young grasshopper it shouldn't be too much longer.

 

I have to wait for my tax return, headers/y-pipe + 3inch is on my list. I am in for this at 200%. Will call Brian when the funds are ready.

 

Sweeeet!!! Your the last one we need bro!!!

 

Just let us know as soon as you place your order. I put my order on my debit card but the funds are in savings for now so as soon as we get the last order I will need to put funds into my checking so let me know.

 

Brian told me he will contact every one on the list a few days before he charges our cards once production starts.

 

Is this thread the list ? I'm writing an email to him right now, I'll link this thread to him as a reference.

 

The best way is to call him . Just by posting that does not add you to the group buy. I posted his number earlier in this thread.

 

I just got off the phone with him ! Very friendly and helpful !

this is my quote:
headers/y-pipe: 817$ USD(+shipping 83$) 900$
3inch: 760$ USD(+shipping 110$) 870$
total : 1770$ USD

Not bad. Will be calling him back before the end of the month. Just hearing it on videos makes me want it more.

 

Don't forget a fast cat

 

Sh*t, I'll ask if the fast-cat is included when I call back, don't think so, the 22inch resonator isn't and will most likely need that, don't wanna be too loud, don't want to get pulled over either.

 

Fast cat is $237

 

Frank may be our ticket. Lets get this going. So close but still feels so far. I am super excited for the gains as well as getting rid of a long over due to be removed rear main cat (Bank 1).

 

It Appears it's a go guys!!! Got my email this morning !!! Man about a month yet till finished headers !!!

 

Nice! does anyone remember the exact number for the deposit? I'll just put $300 on there

 

If i had to guess, I'd give Cattman a call

 

Not that big a deal I know it's in the $240-$250 range. He told us the deposit amount over the phone but that was over a month ago. If someone else that ordered remembered off the top of their head I would transfer the exact amount but like I said it's no big deal. I put $300 on the debit. Thanks NmexMax

 

I believe he just charges your credit card ... and believe me, he's good, he will notify you when the transaction takes place, or he used to.

 

Ya he notified me via email and I got the money transferred from savings to the debit card that I used (my credit cards are all paid off now so I prefer not to use them anymore) I wasn't way excited when I ordered because I knew it would be a while before they went into production but now excitement is building up I can't wait to get rid of my clogged precats.

 

Any one get an estimate on arrival?
fyi my deposit was 245 i believe. prob a lil to late now.
I know brian said 25 to 35 days but would like a good estimate since I will be replacing my engine as well. Right now I have a loaner lexus es300. Miss my baby

 

IIRC they are supposed to be ready to ship out sometime between April 4th-14th

 

I'm guessing shipment day is nearing

 

would brian have headers for a 05 altima 3.5? or is that too farfetched of an idea.....?

 

Call or email him


Brian C Catts
Cattman Performance
Tucson, Arizona
(US exc AZ), 888-296-5153*
(Canada and AZ) or 520-575-6195*
bcatts "at" cattman.com

 

I ordered a set of headers aslo.

 

does anyone know if these will sacrifice any ground clearance if you are lowered more than 1.5''??

 

They will not. 1.5" is still very mild, IMO.