5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

XXR 526 JUST CAME IN!!!! 18X10.5 ALL AROUND

Old 09-02-2011 | 06:17 PM
  #241  
ShippedOut's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 697
From: Toronto Canada
Lovely man. I love the rolling shot, how are your axles?
Old 09-02-2011 | 06:52 PM
  #242  
Clashez's Avatar
Banned
iTrader: (5)
 
Joined: Aug 2009
Posts: 0
From: drifter in a city near you
OOOO chit , man i was about to pull the trigger on the 521's but Chromium Black 526's maybe my pick now.... your killing me i thought i had the wheel picked out (521's gloss black polished lip) and you go throw up, frecking sexy asz pic's of the 526's and killing it by the way.
Old 09-02-2011 | 10:03 PM
  #243  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,728
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
Originally Posted by maxima dude
noway u kno that guy in the sentra the flat black one
haha i noticed the sentra too & didnt expect anypne else to notice it i first seen it on wrongfitmentcrew.com but thought the same like you NO WAY lol but hey i guess its a small world you'll be surprised who knows who
Old 09-05-2011 | 10:12 PM
  #244  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
Originally Posted by Clashez
OOOO chit , man i was about to pull the trigger on the 521's but Chromium Black 526's maybe my pick now.... your killing me i thought i had the wheel picked out (521's gloss black polished lip) and you go throw up, frecking sexy asz pic's of the 526's and killing it by the way.
its up to you....some people go oh yea my car is nice i want the same rims....i dont think some people dont understand what they do to have to make them fit....its more work then most think...
Old 09-05-2011 | 10:15 PM
  #245  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257

Last edited by simpleNclean; 09-05-2011 at 10:20 PM.
Old 09-05-2011 | 11:27 PM
  #246  
Mr. Blue Sky's Avatar
Senior Member
iTrader: (1)
 
Joined: Jun 2005
Posts: 3,301
From: nowheres, CA
loving the look that you have on your max. have always been partial to the spoiler-less kh3 5th gens.
Old 09-06-2011 | 04:21 AM
  #247  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,162
ayo what roof spoiler is that? sarona?!
Old 09-06-2011 | 10:19 PM
  #248  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
Originally Posted by phatboislim
ayo what roof spoiler is that? sarona?!
i believe ao
Old 09-07-2011 | 04:10 AM
  #249  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,162
What'd you pay for it? we were talking about the sarona roof spoiler but saw the $300 price tag...........
Old 09-07-2011 | 12:08 PM
  #250  
Ttownmaxima02's Avatar
Member
 
Joined: Oct 2010
Posts: 218
From: Tampa, FL
car is looking sick man. I like the drop on it
Old 09-16-2011 | 12:37 PM
  #251  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257

Last edited by simpleNclean; 09-17-2011 at 09:04 AM.
Old 09-16-2011 | 01:35 PM
  #252  
Revs2Hard's Avatar
BARF
iTrader: (7)
 
Joined: Sep 2006
Posts: 750
From: RightWheelDrive
That is sick!
Old 09-17-2011 | 09:04 AM
  #253  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
thanks bro
Old 10-23-2011 | 07:12 PM
  #254  
nate44laign's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 88
From: Kentucky
Freaking nice! I do agree with some of the others.. change the headlights back to stock and its gonna look perfect!!
Old 01-06-2012 | 01:03 AM
  #255  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
some updates




car is currently getting a wire tuck then shave the bay then of to paint!!cant wait!
Old 01-06-2012 | 03:16 AM
  #256  
Grand_hustle17's Avatar
Senior Member
iTrader: (22)
 
Joined: Dec 2006
Posts: 7,827
I think I'm gonna end up doing the same conversion.... I kinda want the OEM headights though
Old 01-06-2012 | 04:18 AM
  #257  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,162
*** yea man, that's wassup. havent been keeping up w/ the progress since i killed FB glad to see you got **** going on. any progress pics of the wire tuck?
Old 01-06-2012 | 01:00 PM
  #258  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
Originally Posted by phatboislim
*** yea man, that's wassup. havent been keeping up w/ the progress since i killed FB glad to see you got **** going on. any progress pics of the wire tuck?
yea men.....the guy is coming today to look at it and give me the quote..but really no matter the quote imma pay him..the car was suppose to been in the paintshop but this was a last minute decision....but i think it will look sick
Old 01-06-2012 | 01:02 PM
  #259  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
Originally Posted by Grand_hustle17
I think I'm gonna end up doing the same conversion.... I kinda want the OEM headights though
do it....and im def getting oem headlights...the amount of money i dump in this car is crazy but honestly i love my max wouldnt trade it in or replace its spot!
Old 01-06-2012 | 10:17 PM
  #260  
amixamse's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2009
Posts: 252
dude the rear end is scary enough to spook a vette gaaah it looks mean!!

moar pics!! engine bay pic of wire tuck too when its ready"
Old 01-06-2012 | 10:32 PM
  #261  
Grand_hustle17's Avatar
Senior Member
iTrader: (22)
 
Joined: Dec 2006
Posts: 7,827
it in the plan.... did the bumper line up with all the screw holes n all???.. don't see why it shouldn't but bettr asked than assume
Old 01-14-2012 | 11:38 AM
  #262  
nate44laign's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 88
From: Kentucky
excellent looking car! still completely jealous of the stance on this thing. its unparallel to any other ive seen yet! great work!
Old 01-14-2012 | 11:41 AM
  #263  
nate44laign's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 88
From: Kentucky
also, if u dont mind me asking, how much did the wheel/tire/suspension/etc items and work cost..?
Old 01-14-2012 | 02:07 PM
  #264  
Chunk's Avatar
Junior Member
 
Joined: Apr 2010
Posts: 21
oh man, that looks sick!!
Old 01-15-2012 | 02:18 AM
  #265  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,162
Originally Posted by nate44laign
also, if u dont mind me asking, how much did the wheel/tire/suspension/etc items and work cost..?
why not research what coilovers and the wheels/tires would cost and that'd negate the purpose of your post
Old 01-15-2012 | 08:45 AM
  #266  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,728
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
Lol^ duh lol

Last edited by J2FRESH; 01-15-2012 at 08:47 AM.
Old 01-15-2012 | 09:20 PM
  #267  
nate44laign's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 88
From: Kentucky
Originally Posted by phatboislim
why not research what coilovers and the wheels/tires would cost and that'd negate the purpose of your post
?? as if i havent..? i know what wheels and tires will cost me but when it comes to stance work its always different everywhere you go, and every car is different and require different amounts/types of attention when getting into stancing a car. Why waste countless hours on here looking for a possible thread that may have an abstract answer..? AND 5th gen arent very common with stancing if you havent noticed lol. id rather post up a quick honest question for a quick honest reply.. (DUH) hah sorry, im in high school and play basketball, so i have a life off my computer, so the quicker the better, hence my question. lol a simple quoted "guestimate" price makes all this much easier. (install, rolling, pulling, etc if needed)

KTHXBAIlol
Old 01-16-2012 | 04:21 AM
  #268  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,162
Originally Posted by nate44laign
?? as if i havent..? i know what wheels and tires will cost me but when it comes to stance work its always different everywhere you go, and every car is different and require different amounts/types of attention when getting into stancing a car. Why waste countless hours on here looking for a possible thread that may have an abstract answer..? AND 5th gen arent very common with stancing if you havent noticed lol. id rather post up a quick honest question for a quick honest reply.. (DUH) hah sorry, im in high school and play basketball, so i have a life off my computer, so the quicker the better, hence my question. lol a simple quoted "guestimate" price makes all this much easier. (install, rolling, pulling, etc if needed)

KTHXBAIlol
with that simple statement again, i stand by my post

why not research what coilovers and the wheels/tires would cost and that'd negate the purpose of your post
Old 01-16-2012 | 09:20 AM
  #269  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,728
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
yah agreed lol

coilovers $400-$1200+ used/new p
wheels $700 give or take depending on where you buy, prices vary
tires $400 new ??? depends if you go used or new, and where you go prices vary
install (balance, mount, etc) depends where you go for installation prices vary
fender rolling $15-$50 per fender, depends who does it, and how they do it and what tool they use
fender pulling usually cost extra on top of the fender rolling

but it all depends on where you go and who you know lol

your going to have trial and error regardless

but most everything your asking varies so I would suggest like phatboislim and do research. Call local stores, shops, and places and ask them since most likely you will be doing it in your area like i said before prices vary lol

Goodluck

Last edited by J2FRESH; 01-16-2012 at 09:24 AM.
Old 01-16-2012 | 09:43 AM
  #270  
mrjasonlyrics's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 1,245
Damn bro them tires look phat. I hope you don't get any rub man. But it looks phat as hell. Must be a fun when you have a full load.
Old 01-16-2012 | 10:37 AM
  #271  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
yea its great to drive it and people break there necks but to obtain/upkrrp the car this low is costly...just finished overhauling the whole front end...ball joints,sway bar links,control arms,inner outer tier rods,wheel bearings and new axles
Old 01-16-2012 | 10:38 AM
  #272  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
and car should be getting shaved this week cant wait!!!! ill be sure to post updates
Old 01-16-2012 | 10:47 AM
  #273  
phatboislim's Avatar
Senior Member
iTrader: (27)
 
Joined: Jan 2006
Posts: 5,162
Originally Posted by simpleNclean
and car should be getting shaved this week cant wait!!!! ill be sure to post updates
the bay getting shaved or what? cant wait to see pics...you have lifetime warranty axles? best option man...real talk
Old 01-16-2012 | 10:48 AM
  #274  
Grand_hustle17's Avatar
Senior Member
iTrader: (22)
 
Joined: Dec 2006
Posts: 7,827
my eyes get watery every time i saw this.... quick question simple... when pulling the fenders did the shop ever ran into any problems with the rear door or where the rear bumper meets the fender??... my only concern with the fender pull is that the OEM bump out on the fender also bumps out on the door, get what im saying or i take it they didnt have to go that far???...
Old 01-16-2012 | 11:01 AM
  #275  
ShocknAwe's Avatar
Senior Member
iTrader: (3)
 
Joined: Dec 2011
Posts: 3,292
From: Atlanta, Ga
goot gawd
Old 01-16-2012 | 11:08 AM
  #276  
mrjasonlyrics's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 1,245
With that thing sitting so low i'm sure you gotta avoid the extra load, refuse to go to the grocery and pretend you don't hear that big person asking for a ride home. Suspension must be real stiff.

I have 22X8.5 and it rubbed like crazy. I folded the rear, shaved the inner liner and used some rubber bushing to give it a little lift. It works okay when there isn't anyone in the rear but when I get the passengers it rubs when I hit a little sink in the road
Old 01-16-2012 | 04:38 PM
  #277  
simpleNclean's Avatar
Thread Starter
Member
 
Joined: May 2011
Posts: 257
all the body work was done by me......everything thing on this car was done by me....i had to pull my fenders more then the shop wanted to cause they didnt want to be responsible for the reatrs quarters caving in or something.....i got luky i must say when pulling mine....but ill tell you what my rear passenger quarter the rim wit it so hard the rim made a cut into the fender lol......ill post pictures of what im talking about and how my pull looks
Old 01-16-2012 | 04:43 PM
  #278  
mrjasonlyrics's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 1,245
Originally Posted by simpleNclean
all the body work was done by me......everything thing on this car was done by me....i had to pull my fenders more then the shop wanted to cause they didnt want to be responsible for the reatrs quarters caving in or something.....i got luky i must say when pulling mine....but ill tell you what my rear passenger quarter the rim wit it so hard the rim made a cut into the fender lol......ill post pictures of what im talking about and how my pull looks
Yeah,please do. I'm having problem trying to picture it. lol
Old 01-16-2012 | 04:45 PM
  #279  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,728
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
Nice indeed that's crazy lol in for pics
Old 03-08-2012 | 01:26 PM
  #280  
nate44laign's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 88
From: Kentucky
Originally Posted by J2FRESH
yah agreed lol

coilovers $400-$1200+ used/new p
wheels $700 give or take depending on where you buy, prices vary
tires $400 new ??? depends if you go used or new, and where you go prices vary
install (balance, mount, etc) depends where you go for installation prices vary
fender rolling $15-$50 per fender, depends who does it, and how they do it and what tool they use
fender pulling usually cost extra on top of the fender rolling

but it all depends on where you go and who you know lol

your going to have trial and error regardless

but most everything your asking varies so I would suggest like phatboislim and do research. Call local stores, shops, and places and ask them since most likely you will be doing it in your area like i said before prices vary lol

Goodluck
thanks man this is what i needed hah

BTW NICE MFin PROGRESS! hah cant wait to see more updates. looking good!

Thread Tools
Search this Thread
Quick Reply: XXR 526 JUST CAME IN!!!! 18X10.5 ALL AROUND



All times are GMT -7. The time now is 03:46 PM.