Where to get an axle for 6 speed?
#1
Where to get an axle for 6 speed?
ok...i have another thread i started here a week or so ago about a vibration after installing a new axle...long story short...the GSP axle is the culprit (my car is a 02 se with a 6 speed manual) seesm like GSP didn't put a dampener on any of the axles for this car and under acceleration...you get a slight vibration. i replace the pass axle on 9/21/11...and it broke last monday. the new axle Advanced auto gave me under their 1 year warranty vibrated slightly worse than the first one. i was in advanced auto yesterday with a 45 minute conversation with the manager about a total refund. basically i told him if i didn't get my $110 back...he better stock pile pass side axles for a 02 maxima with a 6 speed...cuz i would be there every other month. i think he agrees and told me he we call me at the end of this week about a full refund.
ANYWAY.....nobody else offers this axle besides Advancedauto that i could find
. Nissan wants...HOLD ON TO YOUR BUTT CHEEKS...$630 for it...and courtesyparts.com offers the oem axle for slightly less..$530
Raxle does not make a axle for this car
DSS does not make an axle for this car
Napa "etc
AutZone "etc
Car Quest "etc
one member "aacshun" suggested this dampener kit:
(http://www.courtesyparts.com/39268ka...957_2024_2045&)
but i have no idea if it can be installed over the axle without taking it apart...i guess its worth the $34 dollars to find out.
does anyone know of a aftermarket comapny that makes this axle that comes with a dampener????
ANYWAY.....nobody else offers this axle besides Advancedauto that i could find
. Nissan wants...HOLD ON TO YOUR BUTT CHEEKS...$630 for it...and courtesyparts.com offers the oem axle for slightly less..$530
Raxle does not make a axle for this car
DSS does not make an axle for this car
Napa "etc
AutZone "etc
Car Quest "etc
one member "aacshun" suggested this dampener kit:
(http://www.courtesyparts.com/39268ka...957_2024_2045&)
but i have no idea if it can be installed over the axle without taking it apart...i guess its worth the $34 dollars to find out.
does anyone know of a aftermarket comapny that makes this axle that comes with a dampener????
#2
I know this might sound bad, but if you do a search you will find many topics on this. I recall there being a post about this a few months ago and there was a brand named with dampers but I dont remember. GSP axles, from what I hear, are GARBAGE and known to be garbage for the reason you stated. I seen some posts with some other options, but you'll have to search. Raxle makes a drivers side axle only I know that because I actually spoke with them, but they dont make a passenger side. If you really want to I heard the drive axle shop makes custom axles....but don't know how much they charge.
#3
Supporting Maxima.org Member
iTrader: (1)
Join Date: Nov 2002
Location: Montreal, QC,Canada
Posts: 256
I installed these, and I'm 100% satisfied
I researched axles far and wide before purchasing these(both sides) and installing in August. These axles, fabricated in China for Diversified Shaft Solutions (http://www.dsscvaxles.com/) are new rather than remanufactured. I found some positive feedback from Subaru forums, but not much for Nissans.
Purchased from EBay, seller theimportexperts in case the links don't function. I was suspicious because of the price, but decided to give them a try. The seller also indicated they felt these were the best bang for the buck in the market, after selling several other brands in the past. They are as pictured in the listing, with vibration dampeners integrated, and correct length for the 6 speed. I've had zero issues with them since installation, and I don't baby my car. Note-no issues includes no vibration.
The only thing I didn't like about them is the axle nut is not OEM style, but rather a castle nut. I chose to purchase new Nissan axle nuts, which are flanged, because they have more contact area at the base.
http://www.ebay.com/itm/2002-2003-Ni...item45ff85f878
http://www.ebay.com/itm/2002-2003-Ni...item45ff85f883
Good luck!
Purchased from EBay, seller theimportexperts in case the links don't function. I was suspicious because of the price, but decided to give them a try. The seller also indicated they felt these were the best bang for the buck in the market, after selling several other brands in the past. They are as pictured in the listing, with vibration dampeners integrated, and correct length for the 6 speed. I've had zero issues with them since installation, and I don't baby my car. Note-no issues includes no vibration.
The only thing I didn't like about them is the axle nut is not OEM style, but rather a castle nut. I chose to purchase new Nissan axle nuts, which are flanged, because they have more contact area at the base.
http://www.ebay.com/itm/2002-2003-Ni...item45ff85f878
http://www.ebay.com/itm/2002-2003-Ni...item45ff85f883
Good luck!
#6
This is a great post.
Hopefully more peeps will chime-in with advice or stories about installing those OEM vibration dampners. --never seen THAT before--.
I work at a Nissan Dealer, and can get a discount, but even THEN - a replacement OEM axle is gonna be 5 x more expensive than it SHOULD be.
However -- i have NO intention of replacing either of my axles and then having a vibration issue.
i have that NOW with my OEM's, and not looking to do the axle replacement boogie.
Good post -- and please guys, keep the info coming!
gr
Hopefully more peeps will chime-in with advice or stories about installing those OEM vibration dampners. --never seen THAT before--.
I work at a Nissan Dealer, and can get a discount, but even THEN - a replacement OEM axle is gonna be 5 x more expensive than it SHOULD be.
However -- i have NO intention of replacing either of my axles and then having a vibration issue.
i have that NOW with my OEM's, and not looking to do the axle replacement boogie.
Good post -- and please guys, keep the info coming!
gr
#7
DSS does in fact make an axle for the 6 speed. I am the one who posted side by side pictures of the GSP vs. DSS.
Here is the correct part # >>> OP (DSS) # 8006N
Here is the thread >>> http://forums.maxima.org/5th-generat...-pictures.html
Here is the correct part # >>> OP (DSS) # 8006N
Here is the thread >>> http://forums.maxima.org/5th-generat...-pictures.html
#8
DSS also makes a nice drive side axle as well w/dampner.
I do not have a side by side but here is the correct part # >>> OP (DSS) # 8001N
There is another thread I have on this as well, but can't find it.
I do not have a side by side but here is the correct part # >>> OP (DSS) # 8001N
There is another thread I have on this as well, but can't find it.
#9
I researched axles far and wide before purchasing these(both sides) and installing in August. These axles, fabricated in China for Diversified Shaft Solutions (http://www.dsscvaxles.com/) are new rather than remanufactured. I found some positive feedback from Subaru forums, but not much for Nissans.
#13
#14
Wonder why they have it in their catalog then? Maybe dude just wanted to go home and didn't want to be bothered that day.....According to their catalog for a 2002-03 Maxima Manual left side is: 8001N and right side is 8006N. What the heck??
#15
Supporting Maxima.org Member
iTrader: (1)
Join Date: Nov 2002
Location: Montreal, QC,Canada
Posts: 256
Just to confirm-they do, and those are the parts I installed
I installed parts 8001N and 8006N manufactured by Diversified Shaft Solutions. I think the confusion may stem from the fact there is another outfit called DSS (short for the Drive Shaft Shop) that produces axles, that are apparently high HP applications for US muscle. I have seen others mention they obtained them from FP also, but I liked the price I found on EBay.
#16
I installed parts 8001N and 8006N manufactured by Diversified Shaft Solutions. I think the confusion may stem from the fact there is another outfit called DSS (short for the Drive Shaft Shop) that produces axles, that are apparently high HP applications for US muscle. I have seen others mention they obtained them from FP also, but I liked the price I found on EBay.
#17
Drive Shaft Shop does not make anything for the maxima. However they do make custom axles so I am sure if somebody contacted them and there was enough interest, they would make a set. Just the price would probably be higher but their axles stand up to any task.
#19
Supporting Maxima.org Member
iTrader: (1)
Join Date: Nov 2002
Location: Montreal, QC,Canada
Posts: 256
Drive Shaft shop is not only for US muscle cars. They actually will make ANY drive shaft custom for you. So for dude just to send a simple email saying "we dont make it" and thats it would be dumb. He could have at least offered to make a custom one. Some thing like :"im sorry we don't normally carry those in stock, but we can custom make axles for any application." Would make more sense.
#20
Thanks for that info. Awesome.
DSS are now my front runners for replacement.
Cupla ??'s:
1. Did you have to buy OEM Gasket for the trans housing where the shaft goes into the tranny? (did I just SAY that?!)
2. Did you loose any/much fluid from the tranny during the swap?
3. Are you LOWERED at ALL??
thanks bro.
gr
#21
yeah...those axles are for people with built engines and 800hp and stuff like that. Way overkill for normal street daily driver, even with headers, exhaust, spacers and a tune....still would be overkill.
#22
Hey Nismo --
Thanks for that info. Awesome.
DSS are now my front runners for replacement.
Cupla ??'s:
1. Did you have to buy OEM Gasket for the trans housing where the shaft goes into the tranny? (did I just SAY that?!)
2. Did you loose any/much fluid from the tranny during the swap?
3. Are you LOWERED at ALL??
thanks bro.
gr
Thanks for that info. Awesome.
DSS are now my front runners for replacement.
Cupla ??'s:
1. Did you have to buy OEM Gasket for the trans housing where the shaft goes into the tranny? (did I just SAY that?!)
2. Did you loose any/much fluid from the tranny during the swap?
3. Are you LOWERED at ALL??
thanks bro.
gr
2. Yes. Best to just drain fluid and replace. Less mess...
3. Yes. Maxspeed springs w/front cut 1/2 coil.
#23
THanks man.
I need to replace my pass. LCA and stab. link under warranty thru FCPimport, so likely order/replace the axles at the same time.
They're Leaking a bit of grease from all the boots, so it'll be sooner rather than later.
I'll post-up how they work. Thanks again for the great info.
gr
I need to replace my pass. LCA and stab. link under warranty thru FCPimport, so likely order/replace the axles at the same time.
They're Leaking a bit of grease from all the boots, so it'll be sooner rather than later.
I'll post-up how they work. Thanks again for the great info.
gr
#25
UPDATE ON EBAY PURCHASED PASS AXLE:
bought this axle on ebay and it did come with dampeners from a seller named "theimportexperts" for $80.00 (here is there web site ...http://www.theimportexperts.com/)
and i just swapped out the one i got from Advanced Auto and took it for a spin. NO VIBRATION !!!! and it was cheaper than the one from the parts store.......
HERE IS A LINK TO A CURRENT EBAY ad : http://www.ebay.com/itm/2002-2003-Ni...172e66&vxp=mtr
i wish i could post some pics here. i took pics of the old axle...and the box the new one came in with the part number...in case someone had some question..
bought this axle on ebay and it did come with dampeners from a seller named "theimportexperts" for $80.00 (here is there web site ...http://www.theimportexperts.com/)
and i just swapped out the one i got from Advanced Auto and took it for a spin. NO VIBRATION !!!! and it was cheaper than the one from the parts store.......
HERE IS A LINK TO A CURRENT EBAY ad : http://www.ebay.com/itm/2002-2003-Ni...172e66&vxp=mtr
i wish i could post some pics here. i took pics of the old axle...and the box the new one came in with the part number...in case someone had some question..
#26
Gonna bump this:
I still haven't replaced my axles.
Hasn't been in the budget -- but nothing has gotten bad enuff to worry yet.
Anybody else notice that DSS is conspicuously absent from FCP's website now??
Only offering is from EMPI. Anybody know anything about this brand??
I thought i had a good solution, now they've changed brand availability.
just looking for peeps' experience with this brand.
gr
I still haven't replaced my axles.
Hasn't been in the budget -- but nothing has gotten bad enuff to worry yet.
Anybody else notice that DSS is conspicuously absent from FCP's website now??
Only offering is from EMPI. Anybody know anything about this brand??
I thought i had a good solution, now they've changed brand availability.
just looking for peeps' experience with this brand.
gr
#27
#28
question. i did the 6speed swap my axle i have that fits the 6speed as no damper. does it matter if i buy one with or without it? these ebay ones all have dampers. kinda lost here
Last edited by TheArtist; 07-03-2012 at 09:06 PM.
#32
Mine is a GSP axle.
#33
#34
Junior Member
iTrader: (1)
Join Date: Oct 2012
Location: San Bernardino California "SoCal"
Posts: 71
A few months ago I bout a passenger side axle n after I installed it I noticed it were a bit longer after I dropped my car I noyiced a clicking noise n I feel a vibration coming from the pass side axle I bought mines from oreillys and I have no clue if I should buy an oem axle n hope this will gix my issue anhone have any suggestions or experience to this?
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 06:34 PM