bryanakaslim

iTrader: (1)

I found a utec system without a harness or a cd. if anyone knows where I can find the other pieces that would be great help

maxima92se

iTrader: (7)

Best bet is to try g35driver or my350z.. Also hit up surratt (not 100% sure of the username) for a plug and play 5th gen harness.

bryanakaslim

iTrader: (1)

Thanks

ranmas2004

iTrader: (2)

His name is "Surratt" and you can contact him as far as seeing if he can make a PnP harness for the Maxima......as far as the disk I think you can get that from online. Darren (Surratt) did my UTEC harness and this is what it looked like when he got finished...top quality work HIGHLY HIGHLY RECOMMENDED!!!

Grand_hustle17

iTrader: (22)

ebay for the disk i believe

NmexMAX

iTrader: (22)

His name is Darren. User name SurraTT. http://forums.maxima.org/member.php?u=47926

You can DL everything online. (manuals, etc).

Also, you'll need an interface tuner that can be purchased online for between 20-40$, a wideband to go with it, preferably the TurboXS unit, and a laptop Windows XP w/ Hyper terminal (Windows 7 doesn't support it).

http://mpsav.com/MPSUTECLogger/MPS_U...r_Download.htm
http://www.jeffsoftware.com/software.php?product=UTI



http://forums.maxima.org/all-motor/4...tec-4-5-a.html
http://forums.maxima.org/all-motor/6...highlight=UTEC
http://forums.maxima.org/all-motor/5...highlight=UTEC
http://forums.maxima.org/all-motor/5...highlight=UTEC

SurraTT

iTrader: (59)

http://www.turboxs.com/shop/246-350z...continued.html

Go to download section.

ranmas2004

iTrader: (2)

I'm still waiting for the install and dyno bro...what up??? Got all those secret weapons over there hiding out.....

NmexMAX

iTrader: (22)

Yeah, been totally lazy. I tried to get a baseline, pre-UTEC/post 3.5" SSSIM dyno Saturday but the damn shops were too busy, so I made the long 100+mile trip for nothing.

I'm going to be in the same town on Wednesday, so I'm keeping my fingers crossed the can accommodate me with an opening.

Then, next week, I'm off to Cabo for a week, so if it doesn't get done before then, I might just skip the pre-tune and get the UTEC hooked up and finally get it tuned.

My timing looked a little low on some of my WOT logging runs Saturday, with upper 20's above 6K.

jviv35

Headed your way with the PNP harness SurraTT. Sorry for thread jack but looking at a used utec and wanted to get opinions on their reliability with our cars (5.5gen), especially from guys who know their stuff. Been researching all over but have yet to find decent input. Any assistance would be appreciated...thanks in advance.

NmexMAX

iTrader: (22)

.

.

And buried in here are a lot of items too ...:

http://forums.maxima.org/all-motor/5...ss-thread.html

SurraTT

iTrader: (59)

UTEC- on a budget, wanting fuel tuning, and timing control. possible to have cold misfire issues, and 1984 style program tuning. If your coming from a Air fuel controller then a utec will be nice upgrade.


Haltech- more expensive then utec, but totally worth it, serious interface, has variable cam control, 2 step, and a ton of more stuff. If your coming form a Air fuel controller then a Haltech will be a huge upgrade.

bryanakaslim

iTrader: (1)

Ya I would like a helteck but I here there like 2k as were the utec was 300 and the pnp is 350 so its 2k vs 650 but im going to try to find a shop some were to do it

SurraTT

iTrader: (59)

Yeah I can wire it up for you if needed. Once I wire it up it becomes a plug and play system for the 02 03 maxima. very nice

NmexMAX

iTrader: (22)

Can't forget the wide-band. Another 300 and some right there. Expensive




Gotta give props to Darren offering us this PnP option, it's the best thing since sliced wheat bread.

bryanakaslim

iTrader: (1)

So just called and and the guy seyed 600 for tune and dyno good price???

Whats a wide band