Rods03Max619

iTrader: (5)

This thread is to give all the 4th gens and 5th Gens a chance at a Brand New Progress Rear Sway Bar, JM Auto Racing, is giving us an opportunity to make this happen, at a discounted price, but need 10 people in order to get it at a lower price, so if you are interested…. Contact JM AutoRacing at 1-855-99-Turbo(88726)

The price will be 150 if we get 10 people, and if we get 20 it will be 140...shipping should be around 10 bucks

This will be going on from the April 2nd till the 25th, JM Auto will take your info and will charge it only if we get the 10 people or 20

So put a post if your down or a maybe, Thanks to All…

I also contacted Cattman the infamous low price seller of these and he isn't selling no more and contacted Progress Direct and shipped they wanted 203 and Im just a couple hours away...

killemall2k

$150 is a good price, thats how much i purchased mine for back in July.

http://www.ebay.com/itm/Progress-62-...5dcb0f&vxp=mtr

i bought mine from these guys, they're going for $190 now shipped, which is pretty pricey. good luck on getting people to order, for those of you who dont have one, you really should get one.

bgsl1ck

iTrader: (3)

I might be in the market..... for the 2k and 2k2

CMax03

iTrader: (3)

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

djshwini

iTrader: (1)

So glad this thread was created because I was in the market for one. Praying for 20 people because 140 is a damn good price.

Rods03Max619

iTrader: (5)

I hope so...

I will be super shocked if that many people get em but I would be cool with the 10 price....


A Cmax do you need one for the 4th gen....

nelledge

iTrader: (6)

Is Cattman no longer selling the Progress Rear Sway Bar at 135? It's an option to check if you don't want to wait for 10 people.

Rods03Max619

iTrader: (5)

Says it right at the bottom already talked to him and Progress, I got it from Cattman for my 03, but that ride was totaled and so trying to get another one....Thanks anyway...

nelledge

iTrader: (6)

Ah. > me Carry on.

cjandura

iTrader: (3)

Is there any chance of getting them to remake the Cattman Ti-Bar
Front Strut Tower Bar i would like to own both of them.

Amerikaner83

iTrader: (17)

I may be interested in the hardware only...I read somewhere that Progress hardware>addco. I just installed an addco RSB yesterday...but ended up having to use a ton of washers to get the thing tight for my 99.

Rods03Max619

iTrader: (5)

I highly doubt Cattman will ever make those again, but those are a very rare item, and everybody who has them know it and wont sell it for under 180 in most cases I've seen..

Rods03Max619

iTrader: (5)

Don't think they will be selling the hardware kit, but you can contact Progress and see what they can do for you.

Amerikaner83

iTrader: (17)

nah, I'm just going to end up using a die and cutting some threads further up my current setup and eliminating the washers

02whitemaximase

iTrader: (38)

I'm in

Brl24

I'm in for one

Rods03Max619

iTrader: (5)

Nice just give a call to the number above if you haven't....

Slo4Do

I'm a maybe. I'll know for sure around the 20th.

Rods03Max619

iTrader: (5)

Cool as long as by the 25th...

Slo4Do

No problem, I'm just hoping that a few more people jump on the deal.

Rods03Max619

iTrader: (5)

From on here should be 6 but who knows...

CMax03

iTrader: (3)

That was me dude! I did that about 7 years ago when the Stealership fixed my car after a accident my wife experienced, and the Stealership lost all my grade 8 hardware and put it back together like some 4th grade children!!! I called Progress then and ordered a complete hardware kit! I found the Progress hardware kit to be more robust and a higher quality of engineering! I still have the old Addco hardware and I can place it together with so high quality bolts and self-locking nuts if anyone need it! PM me

CMax03

iTrader: (3)

He didn't make them he stocked them from Progress!

Rods03Max619

iTrader: (5)

Progress made the FSTB for Cattman the Titanium ones?

Rods03Max619

iTrader: (5)

NismoAce

iTrader: (6)

im down

Rods03Max619

iTrader: (5)

Cool, Hit em up tomorrow if you can, or by the 25th...

Rods03Max619

iTrader: (5)

pinakbet

+1

NismoAce

iTrader: (6)

I just left my name on the list. Supposedly I was the first to call besides the op. The guy on the phone didnt sound so sure. But if he is pleaseeeeee call guys. He is just taking a name and phone number as of right now so no need to put funds up now.

Rods03Max619

iTrader: (5)

Yeah I know I pmed him and was like ****, with all who said yes should be like 7 or 8 but some said later on so hope we get the 10....

SquirrelPig

iTrader: (2)

I'm planning on adding my name to the list. I just need to double check the funds.

Rods03Max619

iTrader: (5)

Nice....

Blue Mesa

Kinda interested, but have become slightly discouraged after reading the panhard link thread... RSB is alot cheaper option though...

Edit: Re-read the article on the multi link beam and realized the Panhard link has its own set of disadvantages. Am now more so interested in RSB.

handmedown

I'm In but I need it for 4th gen?
can I still get on the list

Rods03Max619

iTrader: (5)

[QUOTE=handmedown;8441107]I'm In but I need it for 4th gen?
can I still get on the list[/Q
Yes, you can just call the number up in post #1, these will fit years 95-03 Maximas...

Rods03Max619

iTrader: (5)

NismoAce

iTrader: (6)

Come on guys. This is like one of the best mods. I know there are more people who would like to pick one of these up.

NismoAce

iTrader: (6)

Should this be moved to the sale forum or maybe the tittle changed to better explain this being a group buy?

Rods03Max619

iTrader: (5)

Im going to see with the guy on Monday to see how many are in and if still nobody, give it a shot in the For Sale Sections, maybe he will be cool with more time to see if anything changes....looking at the people who said Yes, its already 10 people.