5th gen Off Topic Thread (Official Ghustle thread v1)
did you fry them tomatoes up yet?
Regarding the salmon, that does sound good. I like to keep it simple, when I do salmon it's just a bit of olive oil, little spices, parsley, and a few other things I can't remember right now...oh yeah:
http://allrecipes.com/recipe/baked-salmon-ii/
2 cloves garlic, minced
6 tablespoons light olive oil
1 teaspoon dried basil
1 teaspoon salt
1 teaspoon groundblackpepper
1 tablespoon lemonjuice
1 tablespoon fresh parsley, chopped
2 (6 ounce) fillets salmon
(I use about HALF the olive oil, and it's plenty)
Last edited by Amerikaner83; 06-19-2012 at 02:14 PM.
That's how I was when i got mine. FFS, it was a ***** to put in for some reason because the gaskets were thicker, and i was under the car on my back, was too lazy to hit up the ramps, and only use the jack stands on one side, so that was stupid on my part.
But the sound is awesome, rasp =/= gone.
Now I wonder if I got any racepower ... probably not.
I wanna throw teh flamez.
That's how I was when i got mine. FFS, it was a ***** to put in for some reason because the gaskets were thicker, and i was under the car on my back, was too lazy to hit up the ramps, and only use the jack stands on one side, so that was stupid on my part.
But the sound is awesome, rasp =/= gone.
Now I wonder if I got any racepower ... probably not.
That's how I was when i got mine. FFS, it was a ***** to put in for some reason because the gaskets were thicker, and i was under the car on my back, was too lazy to hit up the ramps, and only use the jack stands on one side, so that was stupid on my part.
But the sound is awesome, rasp =/= gone.
Now I wonder if I got any racepower ... probably not.
OAN:
I wanna throw teh flamez.
That's how I was when i got mine. FFS, it was a ***** to put in for some reason because the gaskets were thicker, and i was under the car on my back, was too lazy to hit up the ramps, and only use the jack stands on one side, so that was stupid on my part.
But the sound is awesome, rasp =/= gone.
Now I wonder if I got any racepower ... probably not.
That's how I was when i got mine. FFS, it was a ***** to put in for some reason because the gaskets were thicker, and i was under the car on my back, was too lazy to hit up the ramps, and only use the jack stands on one side, so that was stupid on my part.
But the sound is awesome, rasp =/= gone.
Now I wonder if I got any racepower ... probably not.
That was my deal, the one you have went on fine, same as the fast cat, but those were with the Nissan gaskets, trying to fit those thicker gaskets on was FFS, I ended up using 1 thick gasket because 3" and 1 2.75" gasket because coming from y-pipe no need for 3" gasket.
so someone explain this to me.exton nissan already say there going to pay for the damage to the paint due to the cover causing the damage and because it is a nissan factory part so about 9am the service manager calls me now i dont like this guy at all in the first place he is new there and we have already had it out a couple of times so he once again is claiming that i have voided the factory warranty due to having a intake and exhaust on the car and now he is trying to say that the paint repair may not be covered this is after the dealership GM told me it will be taken care of.i keep reminding this guy that the intake and exhaust was purchased at the dealer it is a NISSAN part and was installed by the dealer when i took delivery of the car.
I have a special spot in my heart for the farmers markets over in Hamburg, Germany (wochenmarkt). When I was an exchange student back in 1999-2000, we went there a couple times, and day-um was it awesome!
http://www.hamburger-wochenmaerkte.de/
fingers are crossed.
All the 4" stuffs has been ordered.
4" MAF housing
4" BPi stack
4" Piping
4" to 3" reducer (for TB)
440cc injectors
Dual IM gaskets for quick removal of IM because NWP spacer. Jsut incase I run into any weird problems. Last time I took that thing off, it was a bee eye. Scraping with horrible chemicals. Lotsa elbow grease, not going through that again.
I think that's all I need.
All the 4" stuffs has been ordered.
4" MAF housing
4" BPi stack
4" Piping
4" to 3" reducer (for TB)
440cc injectors
Dual IM gaskets for quick removal of IM because NWP spacer. Jsut incase I run into any weird problems. Last time I took that thing off, it was a bee eye. Scraping with horrible chemicals. Lotsa elbow grease, not going through that again.
I think that's all I need.
fingers are crossed.
All the 4" stuffs has been ordered.
4" MAF housing
4" BPi stack
4" Piping
4" to 3" reducer (for TB)
440cc injectors
Dual IM gaskets for quick removal of IM because NWP spacer. Jsut incase I run into any weird problems. Last time I took that thing off, it was a bee eye. Scraping with horrible chemicals. Lotsa elbow grease, not going through that again.
I think that's all I need.
All the 4" stuffs has been ordered.
4" MAF housing
4" BPi stack
4" Piping
4" to 3" reducer (for TB)
440cc injectors
Dual IM gaskets for quick removal of IM because NWP spacer. Jsut incase I run into any weird problems. Last time I took that thing off, it was a bee eye. Scraping with horrible chemicals. Lotsa elbow grease, not going through that again.
I think that's all I need.
the GM knows the deal im not playing games i keep a relaxation rod in the car at all times never know when someone will need some relaxation therapy
IDK, looks like it'll work.
This is the one I got.
http://rover.ebay.com/rover/1/711-53...item3cbbcb8e87
Was a little nervous about going with the one below since the bolt pattern doesn't look the same.
http://www.treadstoneperformance.com...+Hitachi+Style
Hopefully before this weekend.
This is the one I got.
http://rover.ebay.com/rover/1/711-53...item3cbbcb8e87
Was a little nervous about going with the one below since the bolt pattern doesn't look the same.
http://www.treadstoneperformance.com...+Hitachi+Style
Hopefully before this weekend.
IDK, looks like it'll work.
This is the one I got.
http://rover.ebay.com/rover/1/711-53...item3cbbcb8e87
.
This is the one I got.
http://rover.ebay.com/rover/1/711-53...item3cbbcb8e87
.
Gent, I got the wheels & tires on my 5th gen today. Now to get rid of that 4x4 wheel gap
Well 1200 is being modest lol its more like 1400 and soon it will be making 1600. I dont know much about that car in particular but AMS is doing big things with the R35. It does the 1/4 in 8.626 with a 173 trap. Look up the AMS Alpha Omega GT-R