Quote:

I paid $175 plus $50 brokerage (expected)
Thats a crapload of money for a couple pieces of aluminum. And then tell me that 'so what' they're all scratched to hell? That's "normal"? No... Come on man.
If this moron doesn't make a reasonable reimbursement I'll deny his money and make it my daily job to slander his products all over the forum.
for the jack or the plates? make sure there not used do they look like they been mounted?Man you need to rent a apartment across the boarder just for ordering stuff to.cause this brokerage stuf sounds like privilege taxOriginally Posted by TunerMaxima3000
Couldn't believe this guy. He offered $20 back. I 
I paid $175 plus $50 brokerage (expected)
Thats a crapload of money for a couple pieces of aluminum. And then tell me that 'so what' they're all scratched to hell? That's "normal"? No... Come on man.
If this moron doesn't make a reasonable reimbursement I'll deny his money and make it my daily job to slander his products all over the forum.
Quote:
Is that your image/info, or did you find it somewhere?
I could never figure out how to do something like this.that kind of editing is far above my skill set right nowOriginally Posted by Rochester
Don't let this go to your head... but that's brilliant.Is that your image/info, or did you find it somewhere?
Senior Member
lol i been looking at the "how to" rebulid site and im gonna have to rate the write up a 5, started out great, but the further i go the more i get lost... the pic shows him doing 1 caliper and it has 2 peices so basic math tells you if there is 2 peices and 2 calipers then with both of them disassembled then there should be 4 peices lol but all the sudden i see 8 peices to the caliper like hold fast... lol i thought he was teaching people how to rebuild them, at what step did he show how to remove those 2 extra peices??... maybe ill just buy them and the rebuild kit and pay to rebuild them, **** it lmao
Senior Member
Quote:
i get that, but in the pics hes showing you how to do one caliper hoping you would obviously use the same procedure on the other... with the 1 caliper it only shows 2 pieces so i would think in total that with both calipers there would be 4 peices... not 8 lol... unless he was doing both fronts n rears?? in if thats the case, he didnt show how to remove the rearsOriginally Posted by cjandura
Its 2 sides so do the same to both sides the calipers split
Senior Member
1 caliper spit= 2 pieces
2 calipers split= 4 pieces......
How did he end up with 8 pieces???
2 calipers split= 4 pieces......
How did he end up with 8 pieces???
Quote:
2 calipers split= 4 pieces......
How did he end up with 8 pieces???
4 pistons per caliper 2 halfs front and rearOriginally Posted by Grand_hustle17
1 caliper spit= 2 pieces2 calipers split= 4 pieces......
How did he end up with 8 pieces???
Senior Member
Unbelievable peace of mind from a motion detecting security cam.
When I catch this guy, I'll have a choice of crackin his skull open, or getting him in legal trouble. Although.. I hate any interaction with the cops. Skull-crackin', it is!

When I catch this guy, I'll have a choice of crackin his skull open, or getting him in legal trouble. Although.. I hate any interaction with the cops. Skull-crackin', it is!

Senior Member
Quote:
o.k so he also did the rear lol..... yup ill just pay lmaoOriginally Posted by cjandura
4 pistons per caliper 2 halfs front and rear
Quote:
It literly takes 10 minutes to rebuild one caliper youll spend more time paintingOriginally Posted by Grand_hustle17
o.k so he also did the rear lol..... yup ill just pay lmao
Quote:
When I catch this guy, I'll have a choice of crackin his skull open, or getting him in legal trouble. Although.. I hate any interaction with the cops. Skull-crackin', it is!
What issue you havin Professor Wu. ?Originally Posted by AznRyan
Unbelievable peace of mind from a motion detecting security cam.When I catch this guy, I'll have a choice of crackin his skull open, or getting him in legal trouble. Although.. I hate any interaction with the cops. Skull-crackin', it is!
Senior Member
Quote:
lol dont have an air compressor to remove the pistonsOriginally Posted by cjandura
It literly takes 10 minutes to rebuild one caliper youll spend more time painting
Senior Member
Thievin'-*** people that like to sneak into other people places. Lemme find out who I think it is, and ole boy's gonna be even uglier.
Senior Member
Quote:
did anybody see you installing the cameras???Originally Posted by AznRyan
Thievin'-*** people that like to sneak into other people places. Lemme find out who I think it is, and ole boy's gonna be even uglier.
Quote:
Aluminum also dissipates heat better.Originally Posted by ShocknAwe
alum is less unsprung weight which has the same affect as dropping wheel weight. Iron cal's are stronger and wont get cracks in them under high loads. But I dont think anybody on here has to have that kind of strength. I chose alum for less unsprung weight. THe different versions have different pictons as well. Just little **** they are all good
Quote:
listen get a small rug and some 1/4 plywood to fit under it then drive like 100 or so finishing nails thru the board and carpet then put it in their entry path and unscrew the light in that room you will find out with the quickness.but i didnt tell you thisOriginally Posted by AznRyan
Thievin'-*** people that like to sneak into other people places. Lemme find out who I think it is, and ole boy's gonna be even uglier.
Quote:
its easy goto wawa and use the tire pumpOriginally Posted by Grand_hustle17
lol dont have an air compressor to remove the pistons
Senior Member
Quote:
......Originally Posted by cjandura

when i lived in philly i had a issue with people jumping over our cinderblock wall and taking things out the yard so what i did was take broken glass and cement put a lite coat of cement on the top of the fence then poured the broken glass in it well lets just say no more fence hoppers
Senior Member
Quote:
I will.Originally Posted by cjandura
feel free to use it
Senior Member
Quote:
Originally Posted by cjandura
its easy goto wawa and use the tire pump
how will that work??? theres a shop for $95 the redo it and powder coat it any custom color.... im thinking teal n silver or if i do get the coils in pink... pink n blck 
Quote:
how will that work??? theres a shop for $95 the redo it and powder coat it any custom color.... im thinking teal n silver or if i do get the coils in pink... pink n blck
you can really just pull them out with needle nose pliers but use the tire pump the same as a compressorOriginally Posted by Grand_hustle17
how will that work??? theres a shop for $95 the redo it and powder coat it any custom color.... im thinking teal n silver or if i do get the coils in pink... pink n blck
Senior Member

Senior Member
Quote:
what will make the tire pump release air???Originally Posted by cjandura
you can really just pull them out with needle nose pliers but use the tire pump the same as a compressor
Quote:
the ones at wawa have the open valve with the trigger so you can fill up other things hold it in place and pull the triggerOriginally Posted by Grand_hustle17
what will make the tire pump release air???
spelling does not have to be correct as the intent and direction of the statement is understood by its intended group so any misspelling error is null and void.
Senior Member
Quote:
Plates.Originally Posted by cjandura
for the jack or the plates? make sure there not used do they look like they been mounted?Man you need to rent a apartment across the boarder just for ordering stuff to.cause this brokerage stuf sounds like privilege tax
And they're not used just poorly handled. Soft alloy it's easy to scratch. This is just horrid handling procedures from the seller.
hey i seen on the news tonight where them well mannered middle school children were harassing that defenseless older woman in Rochester,NY.wow did'nt know those kind of people preyed on each other but what the hell i guess survival of the fittest.
Quote:
And they're not used just poorly handled. Soft alloy it's easy to scratch. This is just horrid handling procedures from the seller.
i hope you gave neg feedback and put him out there in the open.Originally Posted by TunerMaxima3000
Plates.And they're not used just poorly handled. Soft alloy it's easy to scratch. This is just horrid handling procedures from the seller.
Senior Member
Quote:
Nope, and the camera's disguised an everyday object, too. I get excited thinkin about catchin the p.o.s. ^^Originally Posted by Grand_hustle17
did anybody see you installing the cameras???
..then I get disappointed when there's no evidence, yet

Senior Member
Quote:
You seem to have a mind like mine, when it comes to deviousness and revenge Originally Posted by cjandura
listen get a small rug and some 1/4 plywood to fit under it then drive like 100 or so finishing nails thru the board and carpet then put it in their entry path and unscrew the light in that room you will find out with the quickness.but i didnt tell you this

Senior Member
Quote:
..then I get disappointed when there's no evidence, yet
lol if i can give an advice an elder gave me... i remember talking about what will i do if i caught somebody stealing from me, or breaking into my car... my most realist response was im not sure because my anger would be so out of control ill probebly try n take his life, they chuckles n then asked me, what if he pulls out a gun as soon as i ran up on him.... i was quiet... so my advice to you is, whatever this thief stole from you just ask yourself, is it worth your life???Originally Posted by AznRyan
Nope, and the camera's disguised an everyday object, too. I get excited thinkin about catchin the p.o.s. ^^..then I get disappointed when there's no evidence, yet
Quote:
hmmm true... i probebly wont mess with it lol... ill pay lol to at least remove them ill break them down myself and ask a shop owner i know lolOriginally Posted by cjandura
the ones at wawa have the open valve with the trigger so you can fill up other things hold it in place and pull the trigger
Senior Member
Quote:
Originally Posted by AznRyan
its pretty dumb... idk why drake is mad at chris brown now because of something that happened to chris brown n his, then gf, now lol... both are bishes, monica (drake) didnt even square up with brandi (CB)... he jumped him
wadda bish moveSenior Member
my friends old Z on TE37's


Senior Member
Quote:
Meh. You're null and void. Originally Posted by cjandura
spelling does not have to be correct as the intent and direction of the statement is understood by its intended group so any misspelling error is null and void.




