3 Codes - Stalling, Hesitating
3 Codes - Stalling, Hesitating
Hi,
I've got a few little issues with my 01SE.
I took the advice of a lot of people here and cleaned my MAF and scrubbed my throttle body out. Not much change.
I'm thinking/hoping my MAF is just shot. I was looking at buying a new one to throw in, but i'm getting some conflicting part numbers.
Any advice/recommendations would be great!
Thanks in advance
Parry
I've got a few little issues with my 01SE.
- CEL is on. Pulled codes p0100, p0171 and p0430
- Stalls out at stops. Particularly after long drives, or just after rain. Generally starts up straight away. Sometimes have to rev in neutral to stop it dropping out again.
- Sometimes will idle for about 3-4 minutes, then drop out.
- Hesitates a lot when accelerating hard. Worse early morning.
- Hissing sound coming from up near the firewall behind the throttle body. Sprayed throttle cleaner all around twice and no change in idle speed. Is this just engine noise? or possible vac leak?
I took the advice of a lot of people here and cleaned my MAF and scrubbed my throttle body out. Not much change.
I'm thinking/hoping my MAF is just shot. I was looking at buying a new one to throw in, but i'm getting some conflicting part numbers.
Any advice/recommendations would be great!
Thanks in advance
Parry
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
Sep 28, 2015 09:01 PM



