TJHeadley

Alright so i just put my warpseed Y pipe on my 01. Im not sure where the hanger goes. Could someone post a picture of it on their car?

Another thing, I cant find the 2 bolts that bolt up to engine from the Y pipe on the rear part. can someone Tell me a part number?

Very much appropriated.

TunerMaxima3000

iTrader: (4)

Any stainless bolts will work

5aprilc

I had to reuse a lot of my bolts. I just put them in the grinder for a little bit to clean the threads. The Warpspeed Y pipe doesn't come with all the bolts unfortunately.



Here's my Y pipe installed.

TJHeadley

i dont see the hanger in the picture, and with the bolts they sent me it would go halfway in and get really hard to turn, witch still causes the exhaust leak.

5aprilc

Yeah the hanger can't be seen from the pic I took sorry. As for the bolts, maybe they sent you the wrong bolts, sorry to hear about that.

TJHeadley

Well where does the hanger go?

theblackone3.5

iTrader: (5)

Just use ur original hanger. Thats what i did. It does sit a little low, but the oem hanger is definitely better.

TJHeadley

Bolt problem solved and would the exhaust still rattle? i have a rattling sound from the rear.

theblackone3.5

iTrader: (5)

maybe, what i did is when i put my exhaust on it was rattling, so i took the support brace off the exhaust, i think it is on the b-pipe and the rattle went away. No problems since

5aprilc

The hanger goes right at the end of the Y pipe, and just before the main cat. The one that Warpspeed supplies is a good replacement for the stock one. Also, that rattle you hear could also be a broken hanger from part of the stock exhaust, unless you have a catback already?