2000 fed spec o2 simulator help

Reply Subscribe

Thread Tools

Search this Thread

Aug 29, 2014 | 05:53 AM

bweibking

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 29

2000 fed spec o2 simulator help

Im looking to simulate my bank 1 sensor 2 o2. ...in getting code p0141. ...i have test pipe and full 2.5 in catback. ... needing help with brands? What kind? And an install thread anyone?

Aug 29, 2014 | 07:00 AM

nestorlugo

Senior Member

iTrader: (11)

Joined: May 2013

Posts: 1,584

If you're referring to the down stream sensor i recommend having a muffler shop weld in a bung for the sensor to your set up instead.

When you say bank 1 sensor 2 and its a fed spec i get confused,

Aug 29, 2014 | 11:29 AM

bweibking

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 29

Quote:

Originally Posted by nestorlugo

If you're referring to the down stream sensor i recommend having a muffler shop weld in a bung for the sensor to your set up instead.

When you say bank 1 sensor 2 and its a fed spec i get confused,

Fed specs still have an o2 sensor after cat which is one im talkin about. ...but will it still function right since i no longer have cat for it to read gases of?

Aug 29, 2014 | 02:44 PM

nestorlugo

Senior Member

iTrader: (11)

Joined: May 2013

Posts: 1,584

It should be no worries...

Aug 29, 2014 | 05:05 PM

colt149

Senior Member

iTrader: (1)

Joined: Jul 2013

Posts: 463

From: Dumont, NJ

You can install nonfouler .

Aug 30, 2014 | 07:26 AM

bweibking

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 29

Ok guys thanks for help ill try this

Aug 30, 2014 | 01:48 PM

bweibking

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 29

Quote:

Originally Posted by nestorlugo

It should be no worries...

Where shoukd i have it put n on the test pioe or after it or does it matter?

Sep 11, 2014 | 08:49 AM

bweibking

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 29

Should i have it put in the test pipe or after?

Sep 11, 2014 | 08:57 AM

TallTom

Senior Member

Joined: Dec 2008

Posts: 1,837

From: NYC

Quote:

Originally Posted by bweibking

Should i have it put in the test pipe or after?

If it is a sim or a nonfouler, it doesn't matter if it is before or after the test pipe for it's the same exact emission reading. That test pipe isn't cleaning up any exhaust fumes.