AE front end mask
#1
AE front end mask
For those of you who have been interested in the traditional front end mask (black vinyl one) to fit an AE, the following (read from the bottom up) is some communication I have had trying to get one made. Yes, I seriously doubt we can get 20-28 orders, but thought you AE people should know it is at least an option.
NO I don't want this thread to become a 'clear bra is better', 'go magnetic', debate...it is just putting out info for those interested...
>>> "George Hernandez" <georgeh@colgancustom.com> 07/10/02 10:23AM >>>
Hello again well usually it will take about 20 to 28 different request you
can have them call us at 1 800 447-2727 ext. 21,22 or dial 0 for operator.
----- Original Message -----
To: <georgeh@colgancustom.com>
Sent: Wednesday, July 10, 2002 8:18 AM
Subject: Re: Anniversary edition
Thank you! I am a frequent visitor to a Maxima owner website and can put
out the word there. Any idea how many requests it would take to get it into
production? Estimated cost per piece? That way I can hopefully get a
number of serious takers and get back to you on this.
>>> "George Hernandez" <georgeh@colgancustom.com> 07/10/02 10:17AM >>>
Hello Mr. Seger, I have seen the Video on the web site and I do feel that
our bra would definitely not fit your vehicle. Here's what I am going to
do; I will put it on the request list that the more request we get, our
engineer that designs the bras will see and therefore make a pattern.
----- Original Message -----
To: <georgeh@colgancustom.com>
Sent: Wednesday, July 10, 2002 7:34 AM
Subject: Re: Anniversary edition
Here is a pretty good idea of what the front end mask needs to
cover...particularly the lower lip is of issue...
http://www.edmunds.com/used/2001/nis...rsarysedan/pho
to_1.html
>>> "George Hernandez" <georgeh@colgancustom.com> 07/09/02 05:56PM >>>
Hello and thank you for choosing Colgan Custom MFG.I will see if our
existing application will fit your Maxima If you can just help me out by
sending me pictures of your front end .
Thank you in advance
Colgan Custom
NO I don't want this thread to become a 'clear bra is better', 'go magnetic', debate...it is just putting out info for those interested...
>>> "George Hernandez" <georgeh@colgancustom.com> 07/10/02 10:23AM >>>
Hello again well usually it will take about 20 to 28 different request you
can have them call us at 1 800 447-2727 ext. 21,22 or dial 0 for operator.
----- Original Message -----
To: <georgeh@colgancustom.com>
Sent: Wednesday, July 10, 2002 8:18 AM
Subject: Re: Anniversary edition
Thank you! I am a frequent visitor to a Maxima owner website and can put
out the word there. Any idea how many requests it would take to get it into
production? Estimated cost per piece? That way I can hopefully get a
number of serious takers and get back to you on this.
>>> "George Hernandez" <georgeh@colgancustom.com> 07/10/02 10:17AM >>>
Hello Mr. Seger, I have seen the Video on the web site and I do feel that
our bra would definitely not fit your vehicle. Here's what I am going to
do; I will put it on the request list that the more request we get, our
engineer that designs the bras will see and therefore make a pattern.
----- Original Message -----
To: <georgeh@colgancustom.com>
Sent: Wednesday, July 10, 2002 7:34 AM
Subject: Re: Anniversary edition
Here is a pretty good idea of what the front end mask needs to
cover...particularly the lower lip is of issue...
http://www.edmunds.com/used/2001/nis...rsarysedan/pho
to_1.html
>>> "George Hernandez" <georgeh@colgancustom.com> 07/09/02 05:56PM >>>
Hello and thank you for choosing Colgan Custom MFG.I will see if our
existing application will fit your Maxima If you can just help me out by
sending me pictures of your front end .
Thank you in advance
Colgan Custom
Thread
Thread Starter
Forum
Replies
Last Post