I still have a complete 07/08 Maxima engine I'd like to sell. It ran, but had low oil pressure when it warmed up. Selling it as a core, or parts. Bought it on Ebay, and was told it had under 20K on it.


Also have catalytic converters with the exhaust manifolds and O2 sensors from the same engine above.

And, the power steering pump from the above engine.


In addition to that, I also have;

another set of heads from a 07/08 engine, with the upper intake and throttle body.

I am looking to move these parts for what I think is cheap..


Complete engine: $300
Set of Cat's, with exhaust manifold and O2 sensors: $200
PS Pump: $20
Heads: $100
Upper Intake: $50
Throttle Body: $50

 

:

 

Here are photos.. When would you like to pick the items up?

I also found another lower intake $50.. and I have lots of other spare engine parts (timing components, etc...) I'd be happy to sell those too..

 

Price for engine shipped to 75069?

 

I am not a junkyard, I am just a guy clearing some stuff out of the garage. If you want to arrange for shipping, I can strap the engine to a pallet and have it ready for your shipper to pick up.

FWIW, I just had an engine shipped to me from the Houston area for $300. The carrier is R & L Carriers Inc, if you want to call them for a quote. They will be delivering to me sometime next week, so they can pick this up at the same time (maybe save you a few $$).

 

Sounds like cheap prices to me.

 

If it helps to move them out, I'd be happy to accept more than the asking price.

 

Upper and Lower intake SOLD.

While looking through parts this weekend, I found I also have an extra oil pan, fuel rail (W/Injectors), 2nd set of exhaust manifolds (no cat's), flex plate (flywheel for automatic) that I'd like to clear out.

Still plenty of small engine parts in the box. Cooling pipes, variable cam solenoids, sensors, oil cooler, wire harness, something that looks like a CV axle support, and more (send requests!).

And, I still have the COMPLETE engine in addition to all of this.

 

How much for the PS pump shipped to 32735?

 

Not sure of the exact weight, but I'd guess $20 to ship it..

 

I just need the pump. Can you take the hose off, place the pump in a plastic bag with other packing to prevent damage and then box it up in a small flat rate USPS priority box? Cost is $5.15

 

I dont think it will fit in a 8 X 5 X 1 box...

 

I still have the PS pump, if anyone is interested in that. At the prices I have listed, I am surprised most of this stuff has not sold yet.

Going through the boxes again this weekend, I also have some random brackets and the CV Axle bracket that bolts to the engine.

Also found a complete fuel rail, with injectors.. The flex plate (flywheel) for a AT. lots of cam shafts, a set of timing gears and chains with the timing cover (front and rear), a box of solenoids for the variable cam control. At least 2 oil pumps..

Second set of exhaust manifolds (in addition to the ones I listed already, with the catalytic converters). one valve cover (don't remember which side).

Engine main wire harness. Looks to be complete and undamaged.

I also still have the complete engine for sale. Considering the lack of interest in it, I am willing to start parting that out too.. It is still complete, so let me know what you need!

HAPPY NEW YEAR!

 

Wiilling to seperate injectors from the rail? They will fit in a ups flat rate box.

 

If you don't want the rail, I will remove the injectors and ship just them.

 

Please pm me price for the injectors.

 

Sold the rear exhaust manifold, still have the front one with the O2 and CAT still attached. I also still have a complete set of exhaust manifolds (just the manifolds).

PS hose sold too, but I still have the pump.

Everything else is still available..

 

How much you looking to sell those exhaust manifolds (would love to have the cats too) for? Shipped to 27410.

 

I only have the one front complete exhaust manifold with the CAT and O2, I was looking to get $100 for that. It is HEAVY, and I doubt it is worth shipping.

The other exhaust manifolds (just the manifolds, no CAT or O2), I'd let go real cheap.. But again, shipping may be expensive on them. I can weigh them if you are interested.

 

Still interested in the PS pump. Sorry havent been on here in a while. I was talking about it fitting in a medium flat rate box. Its something like 8x12x5 or something like that, not the one that looks like a large encyclopedia. Heads? They for sale as well? I know they are heavy but anyway to weigh them...maybe just one, and I will see what it takes to ship.

 

Might you happen to have the 2 fuel dampers?

 

I still have the PS pump. Keep in mind, I am not a business- Just a guy clearing out some stuff I dont need.. If there is some better or less expensive way to ship, I am all for it. I checked the USPS web site, and did not see any flat rate boxes I thought would be good for the PS pump. They all looked to have at least one side that was 4 inches, or less. I may have missed it.

I did weight the heads, and (based on my bathroom scale) they seem to be about 40lbs each. I priced shipping to CA for them, and it came out to about $70 for the set. Again, you have a cheaper alternative and I will try to accommodate. I can also ship it with your UPS or FedEx number if you wish.

Fuel Dampers? Those the big things attached to the fuel rail? I have 2 fuel rails (one with injectors, one without). If they are something else, can you provide a better description?

 

Yes they are both connected to the fuel rail.

 

I have 2 fuel rails.. One with injectors, one without.

 

I need front valve cover. how much shipped to 91706?...

 

What cams do you have? From which engine(s) I mean, so I can look up the specs. Definately interested if you have anything more aggressive than stock 95-96 VQ30DE camshafts. (i.e VQ35DE, VQ35HR, or VQ40DE cams)

 

I have one valve cover in the parts bin, I don't remember if it is front or back. I can take a photo of it next weekend.

There is also still the complete engine. I was hoping to sell it complete, but it looks like that may not happen... So, I could be easily convinced to start parting that out.



I have 3 complete set's of CAM's, all from 3.5L engines. One set is from 2002, the others are from 2007/2008. IIRC, they have been drilled for 3.0L timing gears, I'd have to look and see if the small locating hole has been damaged, making them unusable in a stock 3.5L engine.

 

 

do you still have the cats?

 

Just sent the cats to the scrapper last week.. Sorry. I still have a set of exhaust manifolds.

I am also finding lots of various brackets in my box of parts.. So, if anyone needs any of this stuff, please ask. The drive to send it all to the metal scrapper is increasing, but I know there have been times that I need some stupid obscure part, and have been unable to find it.

 

Bump.. Still lots of parts left..

 

Which parts are left? It might be good to include that info, since the op doesnt say it has been updated

 

Pretty much all of it.. I still have a complete engine, and boxes of Misc parts from 2 other engines..

 

pmed about throttle body

 

I read the whole thing and didn't see if the coil packs are available? Do you have them? Price?

 

Yup. I have ignition coils.. $20 each.

 

I got some already but thanks for the response. GLWS

 

I know its a old post but if u still have both the cats n full exhaust please let me know i will buy them asap. 917-288-2017 txt me please

 

Do you have the coolant pipes? Thanks

 

No cats, but I do have the exhaust manifolds.

Which coolant pipes?