Any 6th genners attending Johnson Park meet?
#5
SMOKEN'04, CHERNMAX, just to name a few..
here is the thread from the PA, NJ, WA members..
http://forums.maxima.org/showthread....4&page=1&pp=40
here is the thread from the PA, NJ, WA members..
http://forums.maxima.org/showthread....4&page=1&pp=40
#6
Originally Posted by Glude
is this were the redline kit is going to be shown to the pubic? If so, someone take a camera because the photoshop of the kit looked HOT!
#8
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Glude
is this were the redline kit is going to be shown to the pubic? If so, someone take a camera because the photoshop of the kit looked HOT!
#9
Originally Posted by chernmax
I'll be there with my 6th Gen, however RedLineMax will not have the new 6th Gen Body kit completed in time (I should know, it will be installed on my car). Delays happen in fabrication, however from the production photo I saw, it's HOT, overall 6th Gens will be REPRESENTING...
#14
I hear ya Tek, but then the cornering lights would have to go. I think it wouldnt look good with the cornering lights and fog lights.
the serona kit eliminates the cornering lights and puts holes where fogs would go.
the serona kit eliminates the cornering lights and puts holes where fogs would go.
#15
Originally Posted by PaL379
I hear ya Tek, but then the cornering lights would have to go. I think it wouldnt look good with the cornering lights and fog lights.
the serona kit eliminates the cornering lights and puts holes where fogs would go.
the serona kit eliminates the cornering lights and puts holes where fogs would go.
I would just do a nice wiring job for some fogs or splice them into the fog wires from the factory.. I'm not sure if the fuse will take the additional lights, but I will do something..
#16
Originally Posted by andymax95
Been there done that with my 4th gens. Never seen a modded 6th gen around me and am thinking about attending if I know 6th gens will be representing.
#17
I'm hoping to roll through. I have a friend comin with me with his 2.5rs hopefully and he has am plans. I may be rolling through a little late if anything. Would like to caravan down but can't see that happening.
#18
Hell yeah i'm going. 3rd year for me. This is by far one of the top 3 meets to go to in the northeast. DC and CT are also good. I had a deadline to get my rims and tires before the meet. So since those are on i'm all good, just gotta see what the deal is on the clifton commons caravan.
#25
i hope we do delay (sorry) i cant make it on saturday have family stuff to do but if its another day i'll be there i bascially have a stock maxima just added neons and tints so i'd like to see what other people have done =)
#26
Originally Posted by Ankit69
i hope we do delay (sorry) i cant make it on saturday have family stuff to do but if its another day i'll be there i bascially have a stock maxima just added neons and tints so i'd like to see what other people have done =)
#27
Originally Posted by Ankit69
i hope we do delay (sorry) i cant make it on saturday have family stuff to do but if its another day i'll be there i bascially have a stock maxima just added neons and tints so i'd like to see what other people have done =)
#28
Originally Posted by Ankit69
i hope we do delay (sorry) i cant make it on saturday have family stuff to do but if its another day i'll be there i bascially have a stock maxima just added neons and tints so i'd like to see what other people have done =)
The meet is on Sunday!!!! so you can make it!!! The photoshop of the 6th gen kit will be on display, and the kit officially goes on sale that day at introductory prices. However the first kits will be rolling out of the factory the following week. I pushed for the kit to be on Chris' car by then but unfortunately no go. However it will be ready for Chris' photoshoot for the magazine ad I just signed the contract for!!!
#33
Originally Posted by Tek-Niq
hell no, a kit will deffenatly finish the look on my car....
#34
anybody have an address of the park or just river road, are these correct directions?
Directions:
Route 287
Take Exit 9 (Highland Park)
Follow River Road toward Highland Park for approximately 2 miles
The park begins on your right at Johnson Drive (4th light)
There are four entrances to the park along River Road
Route 1
Take exit for Route 18 North
At 3rd Traffic light, make a right onto River Road
Park runs along River Road on the right
Main entrance is at first light
Garden State Parkway
Take Exit 129 (New Jersey Turnpike)
Take New Jersey Turnpike South
Follow Directions for New Jersey Turnpike
NJ Turnpike
Take Exit 9 (New Brunswick)
Follow directions for Route 1
http://www.co.middlesex.nj.us/parksr...on/johnson.asp
Directions:
Route 287
Take Exit 9 (Highland Park)
Follow River Road toward Highland Park for approximately 2 miles
The park begins on your right at Johnson Drive (4th light)
There are four entrances to the park along River Road
Route 1
Take exit for Route 18 North
At 3rd Traffic light, make a right onto River Road
Park runs along River Road on the right
Main entrance is at first light
Garden State Parkway
Take Exit 129 (New Jersey Turnpike)
Take New Jersey Turnpike South
Follow Directions for New Jersey Turnpike
NJ Turnpike
Take Exit 9 (New Brunswick)
Follow directions for Route 1
http://www.co.middlesex.nj.us/parksr...on/johnson.asp
#35
Originally Posted by ramberg
I have something for you that will finish the look of your car. If my operation goes well tomorrow I will be there Sun. Later Warren
#38
Why did this thread not get moved but mine did regarding 6th genners attending the so cal meet? Hey Nismo!!! Whats the deal??
I thikn both thread are valid because they are specific to 6th gens.
I thikn both thread are valid because they are specific to 6th gens.
#39
Originally Posted by DeusExMaxima
Why did this thread not get moved but mine did regarding 6th genners attending the so cal meet? Hey Nismo!!! Whats the deal??
I thikn both thread are valid because they are specific to 6th gens.
I thikn both thread are valid because they are specific to 6th gens.