New Taillights
#42
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Too much chrome in the backlights, people might start thinking it's an Altima. I dig the LEDS, however I prefer a red lens. IMO, the current configuration looks a little too busy. I will however make a better assessment once I see them on someones ride off and than lit...
#43
http://www.superbrightleds.com/1157.htm
for all you guys that wanted LED replacements on the stock tail lights wont something like this work?
for all you guys that wanted LED replacements on the stock tail lights wont something like this work?
#44
Originally Posted by chernmax
Too much chrome in the backlights, people might start thinking it's an Altima. I dig the LEDS, however I prefer a red lens. IMO, the current configuration looks a little too busy. I will however make a better assessment once I see them on someones ride off and than lit...
But FWIW, they're just not cutting it for me. At $300 they're definitely not doing anything for me, but maybe after I see them mounted on a car they'll grow on me... maybe.
#45
Guest
Posts: n/a
Originally Posted by Pres7
http://www.superbrightleds.com/1157.htm
for all you guys that wanted LED replacements on the stock tail lights wont something like this work?
for all you guys that wanted LED replacements on the stock tail lights wont something like this work?
#47
Originally Posted by Glude
I checked em out again and I think it would look a lot better with a red lens.
Maybe they can get a set or two in stock... I wouldn't mind driving out there and having them put on just to test and take pictures. At least people would know for sure what they look like on the car.
#48
something tells me they won't fit. unless we are supposed to somehow rip off the oem painted surround, there's gonna be quite a gap.
I appreciate the concept, but would not horizontal leds across the top and middle with reflector on the bottom wrap around only (just like oem bulb placement) look a lot better?
I would hope at least a test fit has been done and pics taken.....
I appreciate the concept, but would not horizontal leds across the top and middle with reflector on the bottom wrap around only (just like oem bulb placement) look a lot better?
I would hope at least a test fit has been done and pics taken.....
#49
Originally Posted by Pres7
http://www.superbrightleds.com/1157.htm
for all you guys that wanted LED replacements on the stock tail lights wont something like this work?
for all you guys that wanted LED replacements on the stock tail lights wont something like this work?
The problem is they don't reflect around in the lens like a regular bulb they look bright from straight on but in general not so good...
#50
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by viguera
Probably in the same way that eating a small donkey anus sandwich would be a lot better than eating a large one.
#51
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Custommaxima.com
damn you guys are fast!!!
Looking for more throttle not more BLING...
#52
Did a photochop using idnumber1's pic (hope you don't mind) but it was hard to get a good and clear chop without a correct angle match.
I did several variations...original image with stock tails is the last pic:
Red tint
Smoke tint
Smoke tint with reverse light cut out
Original
I did several variations...original image with stock tails is the last pic:
Red tint
Smoke tint
Smoke tint with reverse light cut out
Original
#53
Originally Posted by ohthatshot
Did a photochop using idnumber1's pic (hope you don't mind) but it was hard to get a good and clear chop without a correct angle match.
I did several variations...original image with stock tails is the last pic:
I did several variations...original image with stock tails is the last pic:
But like I said, my opinion may change after I see them mounted on a real car and ready to go.
#54
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by ohthatshot
Did a photochop using idnumber1's pic (hope you don't mind) but it was hard to get a good and clear chop without a correct angle match.
I did several variations...original image with stock tails is the last pic:
Red tint
Smoke tint
Smoke tint with reverse light cut out
Original
I did several variations...original image with stock tails is the last pic:
Red tint
Smoke tint
Smoke tint with reverse light cut out
Original
#55
Originally Posted by maX5
Looks like CE has a new set out for the maxima....
http://www.customenterprise.com/view...sd/scspid/5155
What you guys think... Maybe someone can photoshop them onto our cars ?
http://www.customenterprise.com/view...sd/scspid/5155
What you guys think... Maybe someone can photoshop them onto our cars ?
I was waiting for a nice set of LED tails and look at the **** up.
STUPID!!! Dark lenses or Red lenses is the only way to go. Chrome is so cheez *** rice rocket. Mind as well join the dark nights and pretend you drive a Civic MANG.
Whose the first sucker to buy a set.??
#56
I think if u put tint on dark enough it will not look all chrome and fugly but when u hit the brakes, u get to see the LEDs. Maybe if I could get some at cost, Id be willing to experiment with tint. Hint hint!!!
#57
Originally Posted by DeusExMaxima
I think if u put tint on dark enough it will not look all chrome and fugly but when u hit the brakes, u get to see the LEDs. Maybe if I could get some at cost, Id be willing to experiment with tint. Hint hint!!!
#59
Originally Posted by ohthatshot
Did a photochop using idnumber1's pic (hope you don't mind) but it was hard to get a good and clear chop without a correct angle match.
I did several variations...original image with stock tails is the last pic:
Red tint
Smoke tint
Smoke tint with reverse light cut out
Original
I did several variations...original image with stock tails is the last pic:
Red tint
Smoke tint
Smoke tint with reverse light cut out
Original
#65
Originally Posted by Custommaxima.com
well FYI we didnt make these, we are just ther distributer of them.....so i asked if weo could have them tinted, but thy wont do it. So if you dont like them, then thats ok, but for those who do, enjoy! -Roger
The price is way over the top though and imagine they will fog up like hell and be all over Ebay soon in different variations for under 100 bucks.
Kudos for at least showing something different, even if they are not everyones style.....hey, it is a first attempt.....but I will be passing.
#66
Originally Posted by carcus
Personally, I can say that at least someone is attempting to make aftermarket tail lights for the Maxima. Like them or not, at least someone is not leaving us out of the market on new stuff. I would personally have to see them to make the decision and imagine they would look good on lighter cars if any at all.
The price is way over the top though and imagine they will fog up like hell and be all over Ebay soon in different variations for under 100 bucks.
Kudos for at least showing something different, even if they are not everyones style.....hey, it is a first attempt.....but I will be passing.
The price is way over the top though and imagine they will fog up like hell and be all over Ebay soon in different variations for under 100 bucks.
Kudos for at least showing something different, even if they are not everyones style.....hey, it is a first attempt.....but I will be passing.
I agree.....well put
And if you guys want to pool together some fundstogether I'll be the guinea pig.
anyone?.........hello?..........LOL
I'll wait till the come out with an all led red one.
Chris
#67
Im with carcus on this one atleast someone has some interest in our cars but i didnt think it would be somebody like APC. by the way how much longer do we have to wait for people to make some really nice stuff for a $30k maxima and not the rice ****.....02
#68
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Well everyone has an interest in something, however in marketing, you need to analyze your target audience (us) and then request some sort of feedback, similar to how Corey from RedLineMax created his new front bumper and Maciek of RedLineGoods makes the shift/E-brake boots. Not like theirs a shortage of resources available to ask:
Maxima.org
NYCMaxima.org
6thGenMaxima.org
cardomain.com
etc...
I do however understand that some mods are kept on the down low so someone doesn’t jack your idea, however tail light mods are a dime a dozen. Hats off for a great first shot, hopefully the designer will use the feedback received for some constructive changes.
Maxima.org
NYCMaxima.org
6thGenMaxima.org
cardomain.com
etc...
I do however understand that some mods are kept on the down low so someone doesn’t jack your idea, however tail light mods are a dime a dozen. Hats off for a great first shot, hopefully the designer will use the feedback received for some constructive changes.
#69
Originally Posted by Custommaxima.com
well FYI we didnt make these, we are just ther distributer of them.....so i asked if weo could have them tinted, but thy wont do it. So if you dont like them, then thats ok, but for those who do, enjoy! -Roger
#70
vig that aint a bad idea at all since your in the city and their in conn. its not too far of a drive for a test fit that would be cool if they do have a pair for you to try but arent they getting a shipment in like january something?
#71
Originally Posted by MAXDOUT04
vig that aint a bad idea at all since your in the city and their in conn. its not too far of a drive for a test fit that would be cool if they do have a pair for you to try but arent they getting a shipment in like january something?
#80
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
I like Altima's, Especially the SE-R, however for every one Max there are 20 Altima's and I like staying within my class. The tails chrome look are an Altima signature so it's something I prefer to stay away from. Not hating, just not me...