OBD II scanner
OBD II scanner
I just wanted to give everyone in the 6th gen forums a head's up. I've been interested in purchasing a datalogger/scan tool for quite a while now..I e-mailed autoenginuity back in December for a GB price and was told $180.00 including shipping +$10 for Canadian buyers ($70 off retail price) if we got 10 people or more, but there wasn't much interest becasue of Christmas. Since then I've found a few people locally who had this program and tested it. It seems to work well. Anyways recently someone in the fifth gen forum was asking about it, so I called auto back and they said that if we got 10 the gb price was still good. So anyways here's a link.
http://forums.maxima.org/showthread.php?t=458519
http://www.autoenginuity.com/
http://forums.maxima.org/showthread.php?t=458519
http://www.autoenginuity.com/
Just began working with OBDII interface
I am also experimenting with OBDII on my 6th gen. I am using the CANUSB interface from Lawicel (wanted to use my laptop instead of scantool). Probably should have bought Digimoto.
Goals:1) use Digimoto or similar software to monitor CAN network traffic, reset MILs, dyno runs, etc. Many software/shareware NOT CAN compatible. 2) buy NISSAN ECU program file from www.nissan-techinfo.com/nissan/ecm.asp?, modify ECU file (rev limiter, timing map, etc), and upload back to ECU using free J2534 program (Windows based). This only works for 6th gen.
I am newbie with OBDII. So far, I can see the CAN traffic. Again, just started last week.
Goals:1) use Digimoto or similar software to monitor CAN network traffic, reset MILs, dyno runs, etc. Many software/shareware NOT CAN compatible. 2) buy NISSAN ECU program file from www.nissan-techinfo.com/nissan/ecm.asp?, modify ECU file (rev limiter, timing map, etc), and upload back to ECU using free J2534 program (Windows based). This only works for 6th gen.
I am newbie with OBDII. So far, I can see the CAN traffic. Again, just started last week.
Senior Member
Joined: May 2006
Posts: 2,460
From: Bremerton, WA
I found these "Nissan-2-computer" cables on ebay for the maxima enthusiast...... http://cgi.ebay.com/ebaymotors/Nissa...temZ4634261178 http://cgi.ebay.com/ebaymotors/Nissa...temZ4634263766 you can use either of these to look at your engine for diagnostics and all sorts of cool shieet
Senior Member
Joined: May 2006
Posts: 2,460
From: Bremerton, WA
Originally Posted by madmik
I am also experimenting with OBDII on my 6th gen. I am using the CANUSB interface from Lawicel (wanted to use my laptop instead of scantool). Probably should have bought Digimoto.
Goals:1) use Digimoto or similar software to monitor CAN network traffic, reset MILs, dyno runs, etc. Many software/shareware NOT CAN compatible. 2) buy NISSAN ECU program file from www.nissan-techinfo.com/nissan/ecm.asp?, modify ECU file (rev limiter, timing map, etc), and upload back to ECU using free J2534 program (Windows based). This only works for 6th gen.
I am newbie with OBDII. So far, I can see the CAN traffic. Again, just started last week.
Goals:1) use Digimoto or similar software to monitor CAN network traffic, reset MILs, dyno runs, etc. Many software/shareware NOT CAN compatible. 2) buy NISSAN ECU program file from www.nissan-techinfo.com/nissan/ecm.asp?, modify ECU file (rev limiter, timing map, etc), and upload back to ECU using free J2534 program (Windows based). This only works for 6th gen.
I am newbie with OBDII. So far, I can see the CAN traffic. Again, just started last week.
Can you make a post on how to use the interface...... I mean what programs you use and how to use them...... I really want to learn this for future use with my 6th gen......
Thread
Thread Starter
Forum
Replies
Last Post
Omar Abdurrahman Siddiqi
5th Generation Maxima (2000-2003)
33
Aug 26, 2016 05:18 PM