Headers....
#41
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by DeusExMaxima
I think before we start dropping $700-800 for headers or whatever it is, we should see what the time frame for having a set properly made and produced. Let me have this week to get a hold of Hotshot. If they dont return calls or emails, then maybe its best to have our own modified from an exisiting set thats close fit to our cars. If a lot of us email and call Hotshot, then I think they will more likely get off the dime then if only I do it. Encourage them to get a hold of me to arrange a test fit.
#42
Just a heads up. There is an unresolved CEL issue with 05+ Altima 3.5 HS headers due to design and front WB O2 sensors. Most agree that the reason is lack of proper R&D. HS has not been very helpful with this issue, we are basically on our own. HS headers HP gains were very hard to ignore though. And since they are the only show in town, I got them anyway, knowing the possibilty of CEL issue. Hope you guys have better luck than we did with HS.
#43
I called hot shot before, they told me the altima headers won't fit, but I was going to take them to a pipe shop and mod whatever needed to be modded and get them to fit. to bad for the CEL prob, we prob need to relocate the o2 sensors else where..
#44
well this is their web page....... http://www.hotshot.com/product_hotshotheader.htm and this is the set you would get if you were to order any....... http://www.hotshot.com/hotshotheaders/ns3018.html I have an idea email them instead of calling and put our forum link up to show that we are interested...... I was going to purchase the obx and have it modified but have other mods that are taking presidence and don't want to waste money if they aren't going to fit and just too much hassle at the moment......
#46
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by DeusExMaxima
I said all along we should all email them to show the interest in the header. Put it attention Martha or John.
Any updates???
#48
Originally Posted by Redmax
well, Chris' headers are on their way to Redline for us to Test fit and modify them on his car if necessary. We will have info soon. If this is something we can Modify and produce for you guys, we will
#49
thank god someone is willing to work with us..... Redline I don't care what anyone says about ya..... I like your products and they seem to be of good quality keep pushin..... ohh and we want hinges for our suicide trunks
#50
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Glude
I can't wait! Good luck with the install.
PS, today I also installed the new endlinks, they feel great!!!
#51
Originally Posted by chernmax
Thanks, some of us on the East Coast have to make a first move also, I'm confident RedLineMax and I will make it work. Stay posted dudes, we just ordered them today...
PS, today I also installed the new endlinks, they feel great!!!
PS, today I also installed the new endlinks, they feel great!!!
#53
It looks like the HotShot headers have a cat and the end of the y-pipe. If that's what it is, I would really like this so we don't have the strong smell of the exhaust as I have had running header/test pipe/exhaust combos on my previous 2 cars. Also, the OBX is obviously poorly made with fragments of bent pipe welded in all sorts of places. I wish you guys the best in your efforts. I am really excited about this as most others are as well.
#54
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by SLuxury
It looks like the HotShot headers have a cat and the end of the y-pipe. If that's what it is, I would really like this so we don't have the strong smell of the exhaust as I have had running header/test pipe/exhaust combos on my previous 2 cars. Also, the OBX is obviously poorly made with fragments of bent pipe welded in all sorts of places. I wish you guys the best in your efforts. I am really excited about this as most others are as well.
Thanks for the support...
#55
anything yet...... sheesh come on guys this is extremely important...... I am trying to figure out my next upgrade..... I want headers and exhaust..... speaking of exhaust I was told not to get flowmasters..... to get magnaflows.... sound difference..... also heard a N1 exhaust and sounds too much like a civic..... does anyone know how to get the flamed or burnt tip like on the N1s...... I want the for the magnaflows I am getting......
#57
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by po8pimp
what's going on with the fitment...... come on guys don't hold out.... details...... :P
#63
Originally Posted by Tek-Niq
I can use an extra 20hp lol..
#64
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Glude
We all could, hopefully theres no problems with the fitment. Over on the altima boards one of the main guy was ranting on how hard it was to do the 05 headers, he basically said hes never doing a fwd vq35 header install again. Lets see how redline does with em.
You have to reach up and feel for the bolts...
#65
my friend just had his hotshot headers installed on his 05 altima se-r. The job was insane from what i understand. they had to unbolt the frame or some ish. I'm going to drive it tomorow to feel the difference that it made, but the sound is ridiculous. From what he says they made a hell of a difference.
#70
Originally Posted by chernmax
The Headers are scheduled to arrive Wednesday...
#71
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by DeusExMaxima
When is the scheduled fitment? Looking forward to results. And pleeeeease take pics along the way!!