Front Rotora BBK Installed
#42
You will be disapointed then when you get your BBK. The vanes in your new rotors are directional, they can only go on one way to expel the most air.
My rotors have the slots sweeping not cutting. Hope you wont be disapointed with that.
Kamski
My rotors have the slots sweeping not cutting. Hope you wont be disapointed with that.
Kamski
#44
#47
#51
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
I'm having the front bumper re-fiberglassed to smooth out some if the imperfections I never liked about it and on the hood rock chips. Since my overall paint looks great, the body shop recommended we do the bumper, hood, and flare in the front fenders for a perfect match. Then I'm taking it in (soon after) to have 3M clear protected covering applied over. The Roof will be Onyx black with a black matching JDM roof spoiler...
Sorry OT Broyz...
Sorry OT Broyz...
#52
#53
Yeah with the turbo around the corner you will need all the stopping you can get. I can't wait for the rims (NISMO 19) so that I can proceed with the breakes (they don't fit behind my current rims) Might be my last mod for a little while because the little one arrived yesterday. Wohoo!
#56
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
#57
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Great, soon enough more and more peeps will be rolling...eh stopping on Wilwoods.
Yeah with the turbo around the corner you will need all the stopping you can get. I can't wait for the rims (NISMO 19) so that I can proceed with the breakes (they don't fit behind my current rims) Might be my last mod for a little while because the little one arrived yesterday. Wohoo!
Yeah with the turbo around the corner you will need all the stopping you can get. I can't wait for the rims (NISMO 19) so that I can proceed with the breakes (they don't fit behind my current rims) Might be my last mod for a little while because the little one arrived yesterday. Wohoo!
#58
Great, soon enough more and more peeps will be rolling...eh stopping on Wilwoods.
Yeah with the turbo around the corner you will need all the stopping you can get. I can't wait for the rims (NISMO 19) so that I can proceed with the breakes (they don't fit behind my current rims) Might be my last mod for a little while because the little one arrived yesterday. Wohoo!
Yeah with the turbo around the corner you will need all the stopping you can get. I can't wait for the rims (NISMO 19) so that I can proceed with the breakes (they don't fit behind my current rims) Might be my last mod for a little while because the little one arrived yesterday. Wohoo!
#59
#64
#66
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Agree, I just purchased a set of EiBach billet aluminum 5mm spacers (dudes thats less than 1/4 inch!!!) for my Wilwood BBK, I actually don't need them with my rims because the 144mm offset and my lightweight O.Z.s have more than enough clearance. But I also don't mind pushing my rims out a tad for a more aggressive full look. Last, their lightweight, maybe 3lbs between them and will improve cornering because of an overall 1/2" wider stance...
#68
Agree, I just purchased a set of EiBach billet aluminum 5mm spacers (dudes thats less than 1/4 inch!!!) for my Wilwood BBK, I actually don't need them with my rims because the 144mm offset and my lightweight O.Z.s have more than enough clearance. But I also don't mind pushing my rims out a tad for a more aggressive full look. Last, their lightweight, maybe 3lbs between them and will improve cornering because of an overall 1/2" wider stance...
#72
#73
Yep, I got the 10mm kit from ichiba and I believe they were even lighter (will weigh soon). My new rims won't require them to clear wilwoods but will leave them there anyway to make the tires even with the fender. Nice wide stance, good for looks and handling.
#78
Thanks guys. speaking of that Chern, ever since that turbo kit came out I have been soiling all of the towels. Can't wait till I can afford that upgrade. Was going to trade the Max in for the next gen EVO, but with this option I'm going to keep my baby and dust the EVOs.
#79
Thanks guys. speaking of that Chern, ever since that turbo kit came out I have been soiling all of the towels. Can't wait till I can afford that upgrade. Was going to trade the Max in for the next gen EVO, but with this option I'm going to keep my baby and dust the EVOs.
#80
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Thanks guys. speaking of that Chern, ever since that turbo kit came out I have been soiling all of the towels. Can't wait till I can afford that upgrade. Was going to trade the Max in for the next gen EVO, but with this option I'm going to keep my baby and dust the EVOs.