Front Rotora BBK Installed
10-04-2007, 01:23 PM
#81
10-04-2007, 05:49 PM
#82
10-04-2007, 09:48 PM
#83
That means a lot coming from you Chernski
Regardles on the way the slots are, your car will stop on a dime anytime you need it with that Wilwood BBK.
The question is, what are you going to do with your old parts? Forum sale?
Kamski
Regardles on the way the slots are, your car will stop on a dime anytime you need it with that Wilwood BBK.
The question is, what are you going to do with your old parts? Forum sale?
Kamski
10-05-2007, 03:19 AM
#84
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Tough crowd. I wanted the EVO for the power, not the creature comforts, that's why when I bought my Max I bought it unloaded. Because I knew it was going to be all abouth the power for me. Leather, navi, video screens, and stereos that blow out windows, that stuff does not interest me. I only care about what's under the hood and up until know I felt we were approaching the end of the line for what we could get out of these wonderful cars. Hey it was either the EVO or the new Camaro when it comes out. I have a soft sport for them, had '77 Z and and 88 Iroc-Z. But know with the turbo I can spend 5Gs instead of 40.
10-05-2007, 03:26 AM
#85
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
- APEXi Super AFC-II
- Eibach Pro lowering springs
- Rear KYB AGX 8 way adjustable gas shocks
- Front drill/slotted Roto Pro rotors (red painted centers) with steel braided brake lines and EBC "Red Stuff" ceramic brake pads and front 6th Gen 2 piston calipers.
- The Fujita CAI is going to my boy Ramberg (Warren gets the Fujita Dragon)
10-05-2007, 08:44 AM
#87
10-05-2007, 02:06 PM
#90
That's fine Deus... but your roof spoiler (very, very nice indeed) has a flat surface sitting against the glass and is siliconed around the "legs"
This spoiler has only a small groove along the top where it attaches to the edge of the roof. Is this 3M tape strong enough or should I be looking into some sort of epoxy?
This spoiler has only a small groove along the top where it attaches to the edge of the roof. Is this 3M tape strong enough or should I be looking into some sort of epoxy?
10-05-2007, 02:46 PM
#91
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Deus is correct, go to any Autozone, Advanced Auto, Pep Boyz, etc and pick up some 3M double sided emblem tape, **** is strong as ****... After paint my new JDM roof spoiler will only be attached using 3M tape.
Last edited by chernmax; 10-05-2007 at 02:48 PM.
10-06-2007, 06:56 PM
#92
OK thanks Deus and Chern, that is reassuring. What would be a fair quote to get this thing painted?
10-06-2007, 07:50 PM
#94
On a side note, I went to a body shop (high quality, everybody praised it, seen some amazing work myself kind of shop) and asked to remove some tiny dings, and paint the rear bumper (new) and the guys was like $1200 bucks
. I asked about painting the roof black and the guy said he wouldnt even touch it because some sh-t with the seals around the sun-roof. bla blah:stfu:How much were you quoted for the roof if its not a secret? I promise this is my last off topic post.
10-06-2007, 08:03 PM
#95
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
oh thats not bad, i'll do that then since the piece is only collecting dust at this point.
On a side note, I went to a body shop (high quality, everybody praised it, seen some amazing work myself kind of shop) and asked to remove some tiny dings, and paint the rear bumper (new) and the guys was like $1200 bucks. I asked about painting the roof black and the guy said he wouldnt even touch it because some sh-t with the seals around the sun-roof. bla blah:stfu:
How much were you quoted for the roof if its not a secret? I promise this is my last off topic post.
On a side note, I went to a body shop (high quality, everybody praised it, seen some amazing work myself kind of shop) and asked to remove some tiny dings, and paint the rear bumper (new) and the guys was like $1200 bucks
. I asked about painting the roof black and the guy said he wouldnt even touch it because some sh-t with the seals around the sun-roof. bla blah:stfu:How much were you quoted for the roof if its not a secret? I promise this is my last off topic post.
Thread
Thread Starter
Forum
Replies
Last Post
maxfever1987
4th Generation Classifieds (1995-1999)
6
11-19-2016 08:01 PM
Team STILLEN
Autocrossing and Road Course Racing
0
08-10-2015 04:29 PM
Greenmaxspeed
4th Generation Classifieds (1995-1999)
0
08-08-2015 12:39 PM
kirkhilles
5th Generation Maxima (2000-2003)
2
08-08-2015 10:53 AM