6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

350z Muffler

Thread Tools
 
Search this Thread
 
Old Dec 18, 2007 | 06:44 AM
  #1  
anm6's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
350z Muffler

Has anyone tied this yet, I'm getting one for free and wondering if it fits through the rear bumper?
Old Dec 18, 2007 | 06:50 AM
  #2  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
The Maxima has two mufflers and the 350z has one. How would it fit?
Old Dec 18, 2007 | 07:05 AM
  #3  
QwikKota's Avatar
Senior Member
iTrader: (3)
 
Joined: May 2006
Posts: 368
From: Houston, Tx
Originally Posted by anm6
Has anyone tied this yet, I'm getting one for free and wondering if it fits through the rear bumper?
http://www.350z-tech.com/w/images/4/...rriage_001.jpg

You'd have to do a lot of custom fab to extend the main pipe and put in a mandrel bend to link to the offset entrance to the muffler. Looks like it weighs a good bit compared to two small mufflers. I think close to 40 lbs.
Old Dec 18, 2007 | 07:18 AM
  #4  
anm6's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
Originally Posted by SEmy2K2go
The Maxima has two mufflers and the 350z has one. How would it fit?
It dosent matter the two and one the Max is not a true duel exhaust just splits at the rear axle just wondering if the 350z tips and the same width as the hole in the rear bumper? I have no problem fabing a pipe from out b- pipe to the muffler? Just looking for some measurements if it has been done I think I'm gonna try it.
Old Dec 18, 2007 | 07:20 AM
  #5  
QwikKota's Avatar
Senior Member
iTrader: (3)
 
Joined: May 2006
Posts: 368
From: Houston, Tx
Originally Posted by anm6
It dosent matter the two and one the Max is not a true duel exhaust just splits at the rear axle just wondering if the 350z tips and the same width as the hole in the rear bumper? I have no problem fabing a pipe from out b- pipe to the muffler? Just looking for some measurements if it has been done I think I'm gonna try it.
Go to a very large parking lot, i.e. the mall and bring your tape measure and comfy shoes...there will no doubt be at least 1 Z there. I would unbolt the stock mufflers at the rear most flanges and see if the muffler fits up in there before I did any cutting or major modifications. I'd be interested to hear what it sounds like but all of the components upstream of the Z's muffler are way different than ours as well.
Old Dec 18, 2007 | 07:32 AM
  #6  
anm6's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
No I know how different it is I had a 350z before, I was either getting the catmann B-pipe and cutom fabing from there back or just going custom all the way. An were I live there is like 2ft of snow on the ground and it's only like 15 degrees out, I have not seen to may if any Z's since last week. LOL RWD sux in the snow..
Old Dec 18, 2007 | 08:50 AM
  #7  
Hilbe's Avatar
Senior Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 947
From: New Albany, OH
Originally Posted by anm6
No I know how different it is I had a 350z before, I was either getting the catmann B-pipe and cutom fabing from there back or just going custom all the way. An were I live there is like 2ft of snow on the ground and it's only like 15 degrees out, I have not seen to may if any Z's since last week. LOL RWD sux in the snow..
Where do you live? Update your profile
Old Dec 18, 2007 | 10:12 AM
  #8  
anm6's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
I live in Boston Just updated my profile. Sorry. I'm gonna measure it when he gets here next week.
Old Dec 18, 2007 | 10:24 AM
  #9  
RHMax's Avatar
Newbie just Registered
 
Joined: May 2005
Posts: 2,795
From: LA/OC, CA
Originally Posted by anm6
It dosent matter the two and one the Max is not a true duel exhaust just splits at the rear axle just wondering if the 350z tips and the same width as the hole in the rear bumper? I have no problem fabing a pipe from out b- pipe to the muffler? Just looking for some measurements if it has been done I think I'm gonna try it.
What about the spare tire well?
Old Dec 18, 2007 | 10:35 AM
  #10  
DeusExMaxima's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2004
Posts: 7,353
From: Upland CA
Its seems like an AWFUL lot of trouble to go to for what will about to no benefits.
Old Dec 18, 2007 | 10:49 AM
  #11  
anm6's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
Again I have not even looked under my car, my wife drives all the time I only see the car at night and on the weekends I just thought og it today talking to my buddy. Is that blocking the way is that why no one eles has tried it?
Old Dec 18, 2007 | 11:35 AM
  #12  
DeusExMaxima's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2004
Posts: 7,353
From: Upland CA
Yeah the spare tire well is in the way.
Old Dec 18, 2007 | 11:51 AM
  #13  
anm6's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
Well there goes that I idea I'm not hacking the car to get it to fit thanx for all the info guys..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM
TheMafia
5th Generation Maxima (2000-2003)
6
Sep 4, 2015 08:26 AM




All times are GMT -7. The time now is 06:18 PM.