MAX2DAMAX

iTrader: (5)

Ok guys as some of you might know, my car is at the shop getting a new front bumper, new rear bumper, and cf vented hood done, which of course will get mass produced (or at least 10 sets of bumpers and 15 hoods at first,)

well during the prototyping process I will be getting pictures of the progress to make small adjustments, (that wont be for at least another week 1/2,)

Right now I need opinions on the rear bumper, what type of opening should we go with,?






this is the front



and the hood,

kamski

iTrader: (9)

YAR! Ill bee beeelieeveeen when I beee seeeein

athlon omega

iTrader: (4)

Are you also making the sides in that pic of the front bumper? The sides flow with the design. The bottom of the front bumper could be raised some more; it looks like it will be scarping the ground in that pic, especially on a mildly lowered max. It's a hard decision, but I'll go with flat.

cfr94

EXCELLENT WORK! Can't really make out either Slanted or Flat on the rear bumper, but I think either one would look awesome. I agree with athlon omega regarding the front bumper. Look forward to seeing finished products and possibly getting on for the shipping list to receive.

MAX2DAMAX

iTrader: (5)

thanks guys, we are going with the flat one on the rear bumper, and I also added a little more detail to it so it will flow with the front bumper,





The sides unfortunately I'm not making (for now) for now the full ZK kit (thats what I named it ) will come with vip side skirts, and of course there will be some discounts, and also there will be a lot of savings on shipping charges if you the 2 or more of any of this products.

DeusExMaxima

iTrader: (1)

I agree with flat. The lines of the Maxima differ from the GTR, so flat flows better. Good choice. Look forward to finished product

ramberg

iTrader: (29)

I like the bumper but its to low for my streets. On the rear bumper, is it the whole bumper on just the bottom?

SMOKIN'MAX

good question...it looks like it might just attach at the bottom of the existing rear, which is fine with me.

MAX2DAMAX- Glad to see you're going w/the VIP side skirts; I was planning on getting those installed this summer. Now, I'll just order the whole kit when you're ready. Also, nice work man...I was already stoked about the CF vented hood (which I voted for) but I really like the rear bumper too...can't wait to see your finished product!

Apollos2

iTrader: (16)

I can't tell the difference between the slanted and flat. The hood is going to look nice. That front bumper will be too low for me as well.

MAX2DAMAX

iTrader: (5)

that low effect is just for show right now, kind of like when you see sketches of concept cars.


Also the rear is going to be a whole new bumper, mainly because the difference in price was minimal, and also going to a full rear bumper gave us the chance of making the rear just a little bit more skinny, also weight savings, this bumpers are extremely light

cefiro80

+1 on the comments of the front bumper being low but other than that is it coming together nicely.

JRoX85

iTrader: (1)

where can I sign up to buy a hood, also I agree with apollo I cant tell diff lol.

xoomer.com

iTrader: (19)

so far so good.

If its too low nobody from NY and area will buy.

cfr94

Since this is going to be a full rear bumper replacement, will you have the holes already cut out for the back up sensors that follow from side to side on the factory bumper?

blackmax07

I doubt this, because this kit is basically being made for the people with 04-06..07-08's were the only ones with rear sensors..Man someone needs to make a lip for the 07 maxima, that thing begs for one.

MAX2DAMAX

iTrader: (5)

those holes should be really easy to replicate by the owners, I'm sure the sensors are snap on, correct me if I'm wrong

Fastmax05

iTrader: (17)

looking nice... but like kam says... i want to see it really done LOL..

/subscribed

vQ35LIFE

iTrader: (1)

wil lthe front bumper be a little higher from the ground than in pics ? because it looks liek the max in the pic is SLAMMED , im interested in getting everything hope it looks good csant wait for it

bdmaxima

iTrader: (3)

any new updates?

06maxima

anyword if this kit is goin to be fiber glass or polyuerathane?
also is there a price range, for the whole kit as well as everything individually?
thanx

KCMAXX

iTrader: (22)

Looks alright...

Is this kit going to take years to make like the taillights are?

MAX2DAMAX

iTrader: (5)

jajaja, All valid questions,

-no updates yet, im hoping by next week we will have the first pictures of the prototypes,

-right now is going to be made from duraflex, (best of both worlds, light and flexible)

-kc... lets hope not.

jingiko

iTrader: (1)

so its not fiberglass.
im in for a rear bumper cause i badly need one. lol

MAX2DAMAX

iTrader: (5)

it is, but is not rigid, different resins are used giving it flexibility, here is a pic, this kits are also much cleaner on the edges than a regular fiber glass kit, they look like urethane kits but they are not as heavy.

minsbang

good luck with your project but please don't "over do it."

jingiko

iTrader: (1)

i still want a rear regaurdless of what the front looks like.
and the vip skirts.
i need a quality kit for this maxima!

GrimMax

iTrader: (4)

Yeah the NY roads are horrible. I do agree with the slant look though. The front bumper will look amazing!! What is an estimated date of the full completed prototype?

MAX2DAMAX

iTrader: (5)

Ok guys, the hood is about to get raped by a jigsaw, so I made this small rev before they do it, what you all think?

NiZMo1o1

iTrader: (45)

You a brave man for letting them cut up your hood !

DeusExMaxima

iTrader: (1)

Wow, amazing. Cool looking blue too!!

NiZMo1o1

iTrader: (45)

^^ isnt that just painters tape ?

MAX2DAMAX

iTrader: (5)

assuming by the roll of painters tape sitting on by the windshield, Im pretty sure it is.

My-Body-Is-Ready

iTrader: (4)

can we getta estimated price range for each of those items? im deciding weather or not i should get my bumper fixed/painted. if the price is right for the front bumper. ILL WAIT! im def down for the hood though. just want a estimate to see how much itll hurt my pockets.

MAX2DAMAX

iTrader: (5)

guesstimates go as fallow, front bumper 350+tax, plus shipping (depends on location), rear bumper same price as front, shipping same, if you get both shipping will only increase about 20 bucks, hood, first 10 will be 599 + tax, plus shipping, the other 5 will go for 650+ tax +shipping, (still below carbon creations msrp), remember if you live outside of CA, there is no tax, and if you live in or near orange or LA counties we can arrange for a local pick up.

ecks

lovin it. keep up the great work

My-Body-Is-Ready

iTrader: (4)

damn 599 plus shipping and tax? =( can we just make it 599 shipped? lol bumper i might be interested i have to wait and see the final product. same goes for the rear.

athlon omega

iTrader: (4)

So the rear is in fact a bumper? From the photoshops, it looked like a lip kit similar to the Stillen style.

DeusExMaxima

iTrader: (1)

Any estimates for time of completion?

larsim

Deus - the items were on its way to be delivered. But an accident occurred:

MAX2DAMAX

iTrader: (5)

dude im laughing my ace off, thankfully santa was not delivering this items, all 3 molds should be done in about week and half which puts them at about 3 1/2 weeks that is only 3 more days than the estimate, after they are done they will be shipped out by sea (about a months worth), to somewhere in Asia land It'll take them another month 1/2 to 2 months to complete the bumpers and the hoods, finally another trip back and we should be getting these sometime around late May or June perfect for when people start getting their stimulus checks