6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

$850 for motor mounts? help from nissan techs appricaited

Old Feb 22, 2008 | 07:17 AM
  #1  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
$850 for motor mounts? help from nissan techs appricaited

i officially will start calling the dealership..stealership from now on. i go get my oil change and tell them about the squeking noise i hear when i go over bumps and make turns sometimes again and tell them a lot of ppl from max.org and 6thgenmax.org complain about it also and some say its the motor mount. so they did the oil change and looked at the motor mount and the guy tells me theres a problem with them and its goin to cost $850 bucks!!! he said he can help out by makin it $750 instead. im so ticked off cause i complained forever bout it and they find the problem now that im over my warrenty 36k, 52129k. guy looked up my prior history and even though i complained bout it he said theres nothing there that resembles me complain bout the squeakin noise. is there any help any1 can give. ahh im ticked off
Old Feb 22, 2008 | 07:39 AM
  #2  
anm6's Avatar
Senior Member
iTrader: (2)
 
Joined: Nov 2007
Posts: 581
From: Boston MA
If you have your prior paper work and it states the same concern from before when you were in warrenty and it says no condtion found and now your are out and the problem is mysterisaly there now. Then you have a case with either the sevice manager or Nissan USA.
Old Feb 22, 2008 | 11:17 AM
  #3  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Buy aftermarket MMI's and install them yourself.
Old Feb 22, 2008 | 11:29 AM
  #4  
!PrjctMax!'s Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2006
Posts: 5,238
From: Chicago
Originally Posted by NmexMAX
Buy aftermarket MMI's and install them yourself.
If he doesn't even want to change his own oil, then what makes you think he'd want to do MMI?

jkjkjk I'm sure the weather is having part in that...
Old Feb 22, 2008 | 11:38 AM
  #5  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
True. But he could also look for an independent shop and get a quote. 2nd opinion FTW
Old Feb 22, 2008 | 12:58 PM
  #6  
fcoral 05's Avatar
Member
 
Joined: Apr 2007
Posts: 119
From: Bklyn NY
if he's still covered by his powertrain warranty then i beleive the mounts are covered by that 5/60. If i'm not mistaken i beleive i read it in my owners manual, but i have an 05 even if you maybe 04 you said you have 52k so check another dealer or read up your owner's manual warranty suppliment.
Old Feb 22, 2008 | 04:33 PM
  #7  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
nmexmax-lookin into it, but im not familiar with mmi at all so if u could recommend a brand or website that would be cool. also ur 2nd idea i'll try out 2

prjctmax-its a free oil change, too cold to change my own oil

fcoral05-i'll check it out
Old Feb 22, 2008 | 05:44 PM
  #8  
redls1's Avatar
MAXIN' ON
iTrader: (2)
 
Joined: Jul 2007
Posts: 1,310
From: TN
MMI

http://www.racinglineperformance.com...9a19e61f446444
Old Feb 22, 2008 | 06:11 PM
  #9  
!PrjctMax!'s Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2006
Posts: 5,238
From: Chicago
Originally Posted by bdmaxima
nmexmax-lookin into it, but im not familiar with mmi at all so if u could recommend a brand or website that would be cool. also ur 2nd idea i'll try out 2

prjctmax-its a free oil change, too cold to change my own oil

fcoral05-i'll check it out
http://www.racinglineperformance.com...x.php?cPath=27

That's the place that the 6th genners buy all of their little goodies from
Old Feb 25, 2008 | 11:32 AM
  #10  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
ahhhh now my service light went off. autozone said the code is u1000, any1 know what the hell that means?
Old Feb 25, 2008 | 11:53 AM
  #11  
Lovemycar's Avatar
Senior Member
 
Joined: Aug 2005
Posts: 834
what the hell does the motor mounts have to do with squeking noise over bumps and turns? does your car shake at all? I know i've heard some squeking when turning
or mybe over a bump.

But thats only when it's very cold i don't need motor mount my max is smooth as butter
if i were you i'd get a second Opinion i have 40K on my car
Old Feb 25, 2008 | 03:03 PM
  #12  
My-Body-Is-Ready's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2006
Posts: 589
wait. how will MMI help if the motor mounts are blown? if you install the racingline motor mount inserts on blown mounts, will the inserts just break after a while?
Old Feb 25, 2008 | 05:25 PM
  #13  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Typically a blown mount refers to the insert inside the housing. It's very rare a mount 'housing' will 'blow'.
Old Feb 26, 2008 | 04:38 PM
  #14  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
ok...still havn't got a real answer. how can i check if my motor mount is bad/what website can i get the part? answer would be appriciated asap thnx in advance
Old Feb 26, 2008 | 05:19 PM
  #15  
fcoral 05's Avatar
Member
 
Joined: Apr 2007
Posts: 119
From: Bklyn NY
you can check the way i know which is have someone stand infront of the car with the hood open and power brake the car "that's hold the brake down and give the car gas with in in drive "and if the engine is lifting from the front excessevly then your front mounts are gone and do the same with the car in reverse and if the back of the engine lifts then your rear mounts are bad. You can put your car on a lift and see if you have oil at the bottom and if you do then you can trace it and see if it's comming from the mounts. Back in december when my front mount went i was on the pkwy and i steped on the gas and i felt the car give a big jerk but i did not pay any mind to it and the next morning when i got to work i decided to look under the hood and i saw a lot of oil to the front of the engine under the dipstick area so i called up my dealer and ask them if i can bring it in and later in the day they told me it was a front motor mount. Did not even have 25k on my car as yet. You have to remember i think we have 2 hydraullic mounts whick are oil filled and i think 2 regular mounts. Give it a shot and see.
Old Feb 27, 2008 | 06:21 AM
  #16  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Remove engine from mounts --> inspect. That's how you find out for sure.
Old Feb 27, 2008 | 04:32 PM
  #17  
Pronto's Avatar
Senior Member
 
Joined: Nov 2004
Posts: 344
From: Nashua, NH
Originally Posted by fcoral 05
you can check the way i know which is have someone stand infront of the car with the hood open and power brake the car "that's hold the brake down and give the car gas with in in drive "and if the engine is lifting from the front excessevly then your front mounts are gone and do the same with the car in reverse and if the back of the engine lifts then your rear mounts are bad. You can put your car on a lift and see if you have oil at the bottom and if you do then you can trace it and see if it's comming from the mounts. Back in december when my front mount went i was on the pkwy and i steped on the gas and i felt the car give a big jerk but i did not pay any mind to it and the next morning when i got to work i decided to look under the hood and i saw a lot of oil to the front of the engine under the dipstick area so i called up my dealer and ask them if i can bring it in and later in the day they told me it was a front motor mount. Did not even have 25k on my car as yet. You have to remember i think we have 2 hydraullic mounts whick are oil filled and i think 2 regular mounts. Give it a shot and see.
ONLY A MORON WOULD STAND IN FRONT OF A CAR THAT IS POWERBRAKING. HAVE THEM STAND TO SIDE.
Old Feb 27, 2008 | 04:36 PM
  #18  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Maybe he's a moron
Old Feb 27, 2008 | 07:57 PM
  #19  
fcoral 05's Avatar
Member
 
Joined: Apr 2007
Posts: 119
From: Bklyn NY
Originally Posted by NmexMAX
Maybe he's a moron
hey idiot you don't know me so don't go calling me a moron i made a mistake and said infront but it really should be to the side like was stated but and i've also seen silly comments made by you so check yourself first ok. To the original poster you can give it a try standing at the side and see if it works.
Old Feb 28, 2008 | 06:20 AM
  #20  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by fcoral 05
hey idiot you don't know me so don't go calling me a moron i made a mistake and said infront but it really should be to the side like was stated but and i've also seen silly comments made by you so check yourself first ok. To the original poster you can give it a try standing at the side and see if it works.
I'm not that one that called you a moron in the first place.
Old Mar 2, 2008 | 10:27 AM
  #21  
My-Body-Is-Ready's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2006
Posts: 589
yo manny you were wrong. my fron engine mount IS bursted LOL. and you said they couldnt be. i didnt even bother checking the rear.... im gettin new polyurethane mounts next week though.... hmmm starting to doubt your car knowledge.. first the relearn stuff now this!!!! lol jk. your the man.
Old Mar 3, 2008 | 06:36 AM
  #22  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by Look-at-my-MAX
yo manny you were wrong. my fron engine mount IS bursted LOL. and you said they couldnt be. i didnt even bother checking the rear.... im gettin new polyurethane mounts next week though.... hmmm starting to doubt your car knowledge.. first the relearn stuff now this!!!! lol jk. your the man.
I never said they weren't, you ask me if your mounts are busted, , I was throwing a wild guess across the country without any pictures. As far as the WOT self learn stuff, your cars have it, mine does not.

Last edited by NmexMAX; Mar 3, 2008 at 06:40 AM.
Old Mar 3, 2008 | 10:53 AM
  #23  
My-Body-Is-Ready's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2006
Posts: 589
Originally Posted by NmexMAX
I never said they weren't, you ask me if your mounts are busted, , I was throwing a wild guess across the country without any pictures. As far as the WOT self learn stuff, your cars have it, mine does not.
that was a cheap shot.
Old Mar 3, 2008 | 11:53 AM
  #24  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by Look-at-my-MAX
that was a cheap shot.
Not really. Our (speaking from a 5th gen POV) cars aren't smart enough to have it. Your WB's > Our NB's
Old Mar 20, 2008 | 04:25 PM
  #25  
2LEET4U's Avatar
Senior Member
iTrader: (4)
 
Joined: Jul 2006
Posts: 1,640
From: Phoenix, AZ
i just found out today from my dealership that my front motor mount is cracked.

I was hearing a rough idle and the car was shaking during idle/stop phases.

They said i need to get it replaced and it would cost 290.00 to replace the front MMI.

I never heard no squeaking during bump or turns. So you may want to get a 2nd opinion and price check.

Last edited by 2LEET4U; Mar 21, 2008 at 11:09 AM.
Old Mar 20, 2008 | 05:32 PM
  #26  
04MAX_ILLIN's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2007
Posts: 553
From: Long Island
Went in last week for my tranny service. Left with a tranny service and a new front motor mount..total $522.
Old Mar 20, 2008 | 05:40 PM
  #27  
Majestic Ken's Avatar
Senior Member
iTrader: (5)
 
Joined: Nov 2005
Posts: 2,188
From: D-Town right above H-Town
just go with poly bushings and have em intstalled and be done with it. i got a good price. just shop around
Old Mar 20, 2008 | 05:45 PM
  #28  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
you guys mind sayin where u from and if its a nissan dealership+their labor rate so i can show the dealership
Old Mar 20, 2008 | 08:58 PM
  #29  
NiZMo1o1's Avatar
Senior Member
iTrader: (45)
 
Joined: Nov 2002
Posts: 4,246
From: Florida /Wade County !
shesh I paid $153. for the front motor mount

$148. for the Rear tranny mount

Brought Racing Lines MMI's
Old Mar 21, 2008 | 11:07 AM
  #30  
2LEET4U's Avatar
Senior Member
iTrader: (4)
 
Joined: Jul 2006
Posts: 1,640
From: Phoenix, AZ
Im from AZ and if you go to abcnissan.com, you will find the service phone number. Call them and ask them how much to replace the front MMI.

total with part, labor, shop fee and tax = $305.00 but they are willing to lower the price to $290.00
Old Mar 26, 2008 | 02:52 AM
  #31  
riceyasian86's Avatar
Senior Member
 
Joined: Mar 2006
Posts: 393
From: Santa Monica
$850? Uh yeah..no. That's a little pricey to get your mounts replaced.
Old Mar 26, 2008 | 01:06 PM
  #32  
04BlackMaxx's Avatar
Banned
 
Joined: Feb 2005
Posts: 4,269
Originally Posted by Pronto
ONLY A MORON WOULD STAND IN FRONT OF A CAR THAT IS POWERBRAKING. HAVE THEM STAND TO SIDE.
Sweet...I know a few people I may ask for 'help' in determining if my motor mounts are bad. Hey, will u just stand here for a sec and don't move? Muah haha!!
Old Mar 26, 2008 | 04:43 PM
  #33  
GrimMax's Avatar
Where is my shirt?
iTrader: (4)
 
Joined: Apr 2007
Posts: 898
From: Long Island
Originally Posted by NmexMAX
Buy aftermarket MMI's and install them yourself.


After the rear sway bar is installed, this will be the next project
Old Mar 26, 2008 | 05:46 PM
  #34  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
how difficult is it though to do it yourself? and where is a good website or place to get it from?
Old Mar 26, 2008 | 06:18 PM
  #35  
redls1's Avatar
MAXIN' ON
iTrader: (2)
 
Joined: Jul 2007
Posts: 1,310
From: TN
Originally Posted by bdmaxima
how difficult is it though to do it yourself? and where is a good website or place to get it from?
MMI

http://www.racinglineperformance.com...x.php?cPath=27

There is a thread someone just posted in and it seem like a pain in the butt.
Old Mar 26, 2008 | 06:32 PM
  #36  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
Originally Posted by redls1
MMI

http://www.racinglineperformance.com...x.php?cPath=27

There is a thread someone just posted in and it seem like a pain in the butt.
i remember some1 else mentioning the racingline mmi but then after that some1 else said those are only inserts. not that actual motor mount
Old Mar 26, 2008 | 06:39 PM
  #37  
redls1's Avatar
MAXIN' ON
iTrader: (2)
 
Joined: Jul 2007
Posts: 1,310
From: TN
Originally Posted by bdmaxima
i remember some1 else mentioning the racingline mmi but then after that some1 else said those are only inserts. not that actual motor mount
Yeah they are inserts, Sorry . Thought thats what you were asking.
Old Mar 26, 2008 | 07:34 PM
  #38  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
no. thnx for the help though but im actually looking for motor mounts
Old Apr 28, 2008 | 04:44 PM
  #39  
bdmaxima's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 548
From: north jersey 973
been a while but just realized i still need to replace these. can any1 actually give me actual link or place to get motor mounts from? or should i just go with the dealership and hope for a cheap price?
Old Apr 28, 2008 | 05:03 PM
  #40  
fcoral 05's Avatar
Member
 
Joined: Apr 2007
Posts: 119
From: Bklyn NY
http://www.trademotion.com/partlocat...5&model=Maxima
Chaeck that link and see if it helps. at the bottom left in keyword search enter" mounts" and it should come up

Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:47 AM.