GTR Proto Diffuser - Finished!!!!
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
GTR Proto Diffuser - Finished!!!!
After a much longer time than I thought, I finally finished the diffuser. I painted it semi gloss black. The pics still show glare so the white that u see is glare. The other thread shows the process I went through. Here are some pics. Ill install it tomorrow (4 bolts) and take day time pics. Since its so shiney Let me know what you think.
#9
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
Well, the bumper does curve slightly. It would be easy to grind off a bit on the ends to match the curve and repaint.
I need to hook up LED light. Ill do that now. Ill get pics in day time and at night.
I need to hook up LED light. Ill do that now. Ill get pics in day time and at night.
#11
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
I took your advise. Good advise!!! You were right. I didnt think it would make much difference, but in pics u can see the curve of bumper doesnt quite match the straight diffuser. Ill do some final reshaping, sanding, and painting and get pics. While paint is drying ,Ill get electrical hooked up for the LED brake light
#17
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
I curved the edge to follow the bumper as suggested and it was a great suggestion as you see by the pics. I tapped in to the brake light so teh LED light lights up. Unfortunately one of the LEDs doesnt seem to be lit. Im not tearing in to the undertray to repair it. It is very bright and works great. I routed the wiring over the inside of the bumper so it isn't near the muffler. Anyway, check out these daytime pics and let me know what you all think.
#24
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
Here are some more pics:
#29
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
Well, it took effort because I hadnt worked with fiberglass before. Now that I have, I would be better at it. Its a learning curve issue. Was it worth it? Yes. I enjoyed making it, even though it took time.
#35
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
Yes, left LED went out sometime in transition and I cant imagine why. I thought about having one side blinking for turning, but Im keeping it as a brake light because the light is pretty small and its hard to tell left and right since the side LEDs are not facing straight back.
#37
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
Hey Andy, Good to see you. I actually love the tails with your overlays, but the LEDs have a different look. If I could make LED tails with your overlays that would be the best. Hows the NSX? PM me pics