Where can I get this? i hate looking at it like this.
#1
Where can I get this? i hate looking at it like this.
It's the plastic liner that is above the wheel. It was small but now it;s clearly torn, and i want to replace it.
What is it called
stealership? or no?
About how much can i expect to spend on this
http://img413.imageshack.us/my.php?image=max2qp6.jpg
thanks in advance guys
What is it called
stealership? or no?
About how much can i expect to spend on this
http://img413.imageshack.us/my.php?image=max2qp6.jpg
thanks in advance guys
#2
http://www.courtesyparts.com/maxima-...2778_2782.html
$49+Shipping=not worth it...
$49+Shipping=not worth it...
#9
just wanted to confirm i took pics from my car but still not sure if its the splash shield or not....
here are the two photos i took
And this would be the correct part from ebay right?
http://cgi.ebay.com/ebaymotors/SPLAS...spagenameZWDVW
Passenger Side btw....
Thanks
here are the two photos i took
And this would be the correct part from ebay right?
http://cgi.ebay.com/ebaymotors/SPLAS...spagenameZWDVW
Passenger Side btw....
Thanks
#11
$29 for shipping? That is kinda steep. The dealership has it for $69 in my area.
Also where do I get the plastic fasteners/clips for the trim pieces in the engine bay and also for the plastic tray at the bottom front(the one which has the lip hanging down).
Also where do I get the plastic fasteners/clips for the trim pieces in the engine bay and also for the plastic tray at the bottom front(the one which has the lip hanging down).
Last edited by rick sambora; 10-15-2008 at 04:20 PM.
#13
yes thats the correct part.
no, dont buy the ebay one. i work in a body shop. and i am sometimes forced to used after market fender liners all the time. THEY ARE HORRIBLE. the dont fit well. sometimes sag because the plastic is thinner. in all honesty, ive probably put on around 50 aftermarket liners and maybe 2 of them looked good.
if it were me. id go for OEM
no, dont buy the ebay one. i work in a body shop. and i am sometimes forced to used after market fender liners all the time. THEY ARE HORRIBLE. the dont fit well. sometimes sag because the plastic is thinner. in all honesty, ive probably put on around 50 aftermarket liners and maybe 2 of them looked good.
if it were me. id go for OEM
#14
damn i just bought mine from the stealership for 100 after tax... the plastic rivet screws where expensive too all together it came to $110. I suggest you take the wheel off for easier installation. there is aslo a liner(carpet pad material) thats stapled to your current shield.....
#15
Ohhhhh man, you guys feel my pain. I'm on my 3rd liner on the driver side! First one got jacked up when my wheel came off while I was driving, second one came off because one of my bumper tabs broke and the bumper flared out a little on the corner causing the liner to touched the tire, now my 3rd.
I paid $32 from Keystone parts.
I paid $32 from Keystone parts.
#16
Ohhhhh man, you guys feel my pain. I'm on my 3rd liner on the driver side! First one got jacked up when my wheel came off while I was driving, second one came off because one of my bumper tabs broke and the bumper flared out a little on the corner causing the liner to touched the tire, now my 3rd.
I paid $32 from Keystone parts.
I paid $32 from Keystone parts.
and got a link on where to buy it from....
#18
Sorry for the late reply. Keystone parts is a local parts store here in Dallas that my buddy works at. You might wanna google it and check your area. I had the body shop that fixed my fender the first time put it on for free since the fender work was still under warranty. Installation isn't bad, just time consuming. You have to remove the wheel and all the tabs/screws that keep the liner on. It's pretty straightforward.
#19
I'll bump this thread since I Just installed it myself (Front wheel well splash guards).
Most Nissan dealers will have it for about 60 bucks (in my case anyways here in san antonio).
The one that Keystone has is a bit cheaper, but I actually went to the automotive store and looked it and liked the OEM a little better.
It can be installed without taking your tire out IFFFF if you have small hands and a SHORT philips and flathead.
There are about 8 plastics clips and 4 actual screws that screws to the fender and bumper.
Taking out the tire out make it alot easier.
If you don't have patience, pay someone 50 bucks to do it. If you do, save your money. It's easy.
http://img385.imageshack.us/my.php?image=fenderuq7.jpg
Most Nissan dealers will have it for about 60 bucks (in my case anyways here in san antonio).
The one that Keystone has is a bit cheaper, but I actually went to the automotive store and looked it and liked the OEM a little better.
It can be installed without taking your tire out IFFFF if you have small hands and a SHORT philips and flathead.
There are about 8 plastics clips and 4 actual screws that screws to the fender and bumper.
Taking out the tire out make it alot easier.
If you don't have patience, pay someone 50 bucks to do it. If you do, save your money. It's easy.
http://img385.imageshack.us/my.php?image=fenderuq7.jpg
#20
LED switchback turn signal lights
im new on this website and there might be a thread about the LED lights, but i couldnt find it so if someone can tell me where i can get the LED switchback lights from, please!! thanks.
Thread
Thread Starter
Forum
Replies
Last Post
TKHanson
5th Generation Maxima (2000-2003)
6
11-24-2018 01:39 AM
Unclejunebug
5th Generation Maxima (2000-2003)
10
04-02-2016 05:42 AM