Driving/Fog light Rewire with Stalk Control ** Write Up **
#43
I installed the KP module, it's all set up and ready to go, works great with no -problems and will work on the 07-08...
http://www.kptechnologies.com/products.php#/12
The how to:
http://www.kptechnologies.com/forums...hp?f=30&t=1094
http://www.kptechnologies.com/products.php#/12
The how to:
http://www.kptechnologies.com/forums...hp?f=30&t=1094
#44
Sorry for bumping this after a year, just wanted to say that I just finished this and the hardest part was running the wire thru the firewall.
Since I have a remote start installed it was a lot easier to tap into the car's ignition wire instead of the fusebox, that way the fogs don't flash off while you're cranking the motor (which is good if you have HIDs) since the ignition wire has a constant +12v in both the On and Start positions.
Thanks for the great write-up!
Since I have a remote start installed it was a lot easier to tap into the car's ignition wire instead of the fusebox, that way the fogs don't flash off while you're cranking the motor (which is good if you have HIDs) since the ignition wire has a constant +12v in both the On and Start positions.
Thanks for the great write-up!
Thread
Thread Starter
Forum
Replies
Last Post
03VQMAX
5th Generation Classifieds (2000-2003)
16
10-02-2016 09:36 AM
Slamrod
4th Generation Maxima (1995-1999)
5
04-10-2016 05:24 PM