Whats new with your Maxima
#4
Don't really have much things left except to pay for all these repairs that seem to pop out of nowhere. If all goes well then my future mods for the next year:
New rims and tires (in the next month or two), new paint job, new headlights with "added bonuses", and finally add halo fog lights.
After all of those. I'll finish it off with coilovers and spacers.
#5
Nice car 6.5 , the tail lights are hot . My mods to come are the 07 swap just need a few other bits like hood,rear bumper, spoiler and a grille emblem . Mods to date Pioneer Avic 900BT,pioneer 12in subs, painted interior trim pieces , and aftermarket HID kit which I hate . For the 07 swap I will retrofit HID projectors and OEM ballast .
#6
About a week ago, I installed ATL rotors with Hawk Ceramic pads. What an improvement!!! I also installed new Monroe Front strut mounts and Moog boots. I finally replaced the noisey Kyb mounts and boots that were installed 7 months ago. Finally I can go over bumps and not hear a thing.
Next Mods are new tires
Next Mods are new tires
#8
As of lately, I have replaced my front windshield, painted front valve cover wrinkle red (also painted battery tie down, rad. mounts, and hood security button mount)
#10
Nice car 6.5 , the tail lights are hot . My mods to come are the 07 swap just need a few other bits like hood,rear bumper, spoiler and a grille emblem . Mods to date Pioneer Avic 900BT,pioneer 12in subs, painted interior trim pieces , and aftermarket HID kit which I hate . For the 07 swap I will retrofit HID projectors and OEM ballast .
#11
just did a few suspension mods, kcmaxx rear strut bar, racing line fsb, 25 and 20mm spacers, 8.5" rims (22lbs each) tempered Rear Sway Bar
and a y pipe
gotta say the suspension mods made her handle so much better. night and day. getting traction rods and end links soon.
and a y pipe
gotta say the suspension mods made her handle so much better. night and day. getting traction rods and end links soon.
#14
dude, this was the most worth while mod i've done so far.. i love my remote start. i got a viper 2 way
#15
Yeah I was thinking about the viper two way @ best buy today but rather would have it work off my " Nissan keyfob " VS the "aftermarket one". Viper is The best in the business tho!
#16
i can't tell you how relaxing it is to be out in the heat all day and your max greets you with the fresh smell of leather and a cool breeze...
#19
http://flic.kr/p/akdZb1
http://flic.kr/p/akdZbY
http://flic.kr/p/akdZd7
http://flic.kr/p/akdZdN
http://flic.kr/p/akbd6D
They sound much deeper than the other mufflers and I am really liking the quad look!!
http://flic.kr/p/akdZbY
http://flic.kr/p/akdZd7
http://flic.kr/p/akdZdN
http://flic.kr/p/akbd6D
They sound much deeper than the other mufflers and I am really liking the quad look!!
#20
So far I've got NWP spacers and ETL, UR crank pulley, Stillen SRI, EBC green stuff front pads, Goodridge SS brake lines, Hayden 403 trans cooler and 4g subframe collars installed. I've got a Cattman y-pipe on order. I have a uninstalled Transgo Reprogramming Kit I need to install sometime this month. I'm saving for coilovers, not sure what brand I'm getting but I have the Kuos Garage QT link when I do lower my car.
#21
97 GXE 5mt, Cattman Y in the making with this group deal. Test pipe and Pacesetter short throw waiting to go in when the Y comes in. Also have a plan to snag up LED tails and a roof spoiler on Friday. Next up will be 00vi.
#28
Takeda Intake CAI
Racingline Y-Pipe
eBay Cat-back
NWP block plate
NWP Spacers
Jet Maf sensor
07-08 mods:
Headlights(blacked out)
Front bumper
Grill(modified by myself)
hood
rear bumper
spoiler
Progress Springs
KYB Gr-2 Struts/Shocks
Progress RSB
Painted interior pieces
Painted under the hood covers
Painted intake manifold
5% tint all around
Debadged
MOMO Shift ****
350Z pedals
Coming Late September Led Tails
Coming Mid October Cattman headers
Also in the works going internal on the engine, Wilwoods big brake kit, different mufflers, aluminum radiator, ground kit made by myself and clutch kit and flywheel.
Racingline Y-Pipe
eBay Cat-back
NWP block plate
NWP Spacers
Jet Maf sensor
07-08 mods:
Headlights(blacked out)
Front bumper
Grill(modified by myself)
hood
rear bumper
spoiler
Progress Springs
KYB Gr-2 Struts/Shocks
Progress RSB
Painted interior pieces
Painted under the hood covers
Painted intake manifold
5% tint all around
Debadged
MOMO Shift ****
350Z pedals
Coming Late September Led Tails
Coming Mid October Cattman headers
Also in the works going internal on the engine, Wilwoods big brake kit, different mufflers, aluminum radiator, ground kit made by myself and clutch kit and flywheel.
Last edited by RAZ76; 09-11-2011 at 09:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post