6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

Engine question

Old May 7, 2015 | 07:35 PM
  #1  
Story's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2012
Posts: 40
Engine question

So I'm buying a 2004 Se maxima with a blown engine. Do I need a 6th gen engine for a replacement or will a 5th 3.5 work? Does it matter if it's an auto or m/t engine other people than flywheel parts witch I will alleeady have from blown engine. Any other things I might run in to that you can tell me? I'm going to change water pump and timing chain whel it's out of the car and put headers new flywheel and clutch kit whel it's apart. Any other cheap mods that I should do with the engine out? Thanks for advice. And this is not the first swap I've done just not on a fwd Nissan. And if I get 350z cams do they make much of a difference and how difficult is it to put in in cams with the engine inplace.
Old May 7, 2015 | 08:34 PM
  #2  
wingnut2006's Avatar
Junior Member
 
Joined: Mar 2014
Posts: 77
Do not know it a 5th gen engine will work. Would assume that it would.
I would replace the mount and transmission mounts. Expensive but much easier to do with the engine and transmission removed.
I would also replace the spark plugs and check the valve cover gaskets for leaks. To remove and replace the camshafts you have to remove the timing covers and camshaft chains. I you are going to change be sure and change when you replace the timing chains, tensioner/s and chain guides and shoes.
Old May 9, 2015 | 09:13 AM
  #3  
Story's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2012
Posts: 40
Yea my plan is new timing chain/ kit, new clutch new water pump, new spark plugs and herders. I just really want to know what vq35 engines will work with this with no wiring. Will the Altima 3.5 work 5 gen, ect.... And if it's an auto donor engine I just need to change the flex plate to a flywheel right?
Old May 9, 2015 | 04:52 PM
  #4  
piggylover1985's Avatar
Member
 
Joined: Sep 2011
Posts: 99
I did an 06 swap into my 02 a few years back and it worked fine, i don't see why not ? The 02-03 has no EGR also, you will have to swap over oil pan and little stuff externally. If different drive train auto/manual u will have to swap out the throttle body if my memory is right.
Old May 11, 2015 | 02:51 PM
  #5  
Story's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2012
Posts: 40
So I'm gunna guess any vq35de will work for a new motor as long as it's fwd biased right? I found an 07 Altima 3.5 with 80k miles for cheap is there any differences between the motors. Is the cam duration and lobes shorter and smaller on some vq35s than others?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MAXSE5SPD
General Maxima Discussion
33
Sep 17, 2022 04:00 AM
Johnny9595
4th Generation Maxima (1995-1999)
5
Sep 3, 2015 05:18 AM
A32goldylocks
4th Generation Maxima (1995-1999)
2
Sep 2, 2015 06:39 AM
Hawkeye61
6th Generation Maxima (2004-2008)
0
Aug 12, 2015 06:45 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:49 AM.