Intermittent front window switch & passenger power door lock
#1
Intermittent front window switch & power door lock
This is my first time posting on a forum ever. I've had my 2004 Maxima 3.5 L 6 speed for a few months now and recently the passenger window stopped responding to the controls on either door. Fortunately a few hours later it started working but the next day it stopped again. I noticed the passenger door lock button doesn't work either. I don't know if it works when the window is working because I don't usually want to risk rolling it down; I'm worried it'll get stuck in the down position again.
Now my driver window working either!
I can still control the locks and rear windows from the driver switch.
I pulled the switch out and put dielectric jelly on it, all connection semed good. I'm wondering if I should just go buy a new Switch? Or could it be something to do with the alarm system? ECM? When I look it up on Direct Techs it tells me for the front windows to tag factory alarm arm and disarm wires which are at that very window switch.
Any advice would be greatly appreciated thank you.
Now my driver window working either!
I can still control the locks and rear windows from the driver switch.
I pulled the switch out and put dielectric jelly on it, all connection semed good. I'm wondering if I should just go buy a new Switch? Or could it be something to do with the alarm system? ECM? When I look it up on Direct Techs it tells me for the front windows to tag factory alarm arm and disarm wires which are at that very window switch.
Any advice would be greatly appreciated thank you.
Last edited by Ash B; 11-30-2017 at 02:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
kjm900r
4th Generation Maxima (1995-1999)
6
08-05-2015 07:14 AM