Rims on their 7th Gen Max MEGA Thread!
#2162
thanks! they are replica bmw wheels. another member here and I are rocking both the m5 and m6 style in 20 inch.
they are made in china but they are pretty good for the price. I haven't had any problems with these at all.
they are made in china but they are pretty good for the price. I haven't had any problems with these at all.
First I wanna say what a great focal point from a photography standpoint by hitting the back C pillar in the right light to get a whole new 3/4 angle. By saying that, this picture made me fall in love with those wheels. It reminds me of the 136K Audi A8 prestige. What brand of wheels are they and what size? That is one of the classiest max's I have ever seen.
#2163
#2165
sweet but replicas would have never crossed my mind as to what those are. Thats awesome. Do you have a link to the company?
#2173
#2174
#2176
Depending on the manufacturer you can get a similar stretch. I have seen 275's on a 10" wheels with a straight-up sidewall. However, I'm running Falken 452's on my 10's and my first instinct was to run 275 rears. When we mounted them up, they stretched out just like that. I'm not a big fan of that look if not completely dropped so I swapped them for 285's. Now they sit "square" just like I like 'em
#2184
#2185
Just ordered these 20x8.5 for my Precision Grey 2010...i hope they look good on there.
http://img12.imageshack.us/img12/4940/bewheels.jpg
http://img12.imageshack.us/img12/4940/bewheels.jpg
#2187
Sounds like it should. I believe factory wheels are a +50 offset and people throw +15 spacers on those. You should be good to go...mustangs are 5x114 bolt pattern? I always thought they were 5x112 for some reason.
#2188
Just ordered these 20x8.5 for my Precision Grey 2010...i hope they look good on there.
http://img12.imageshack.us/img12/4940/bewheels.jpg
http://img12.imageshack.us/img12/4940/bewheels.jpg
#2191
Not true at all. Most people get new springs to lower the car, but not because they go bad. Also have not heard of anyone with shock issues either.
#2192
what rims are these? been looking every where to find out what rims are on the stillen max, any one know who makes these
finally decided on these, calling my guy about them tmrw, same as the ones on the stillen maxima, they're only 26 pounds which is nice, either doing 20x10 rears and 20x8.5 front, 20x10 rear and 20x9.5 for front, 20x9.5 for back and front, or 20x9.5 for rears and 20x8.5 for front, or 20x8.5 for front and back lol, lots of choices havent decided yet, what do you guys think? also, what should i do for the offset? it comes 35mm ET or 20mm ET, mind you this car is dropped about an inch, and i dont want any rubbing or to have to roll the fenders.. and lastly... 5x120, 5x114 or 5x112 are the bolt patterns...opinions?
finally decided on these, calling my guy about them tmrw, same as the ones on the stillen maxima, they're only 26 pounds which is nice, either doing 20x10 rears and 20x8.5 front, 20x10 rear and 20x9.5 for front, 20x9.5 for back and front, or 20x9.5 for rears and 20x8.5 for front, or 20x8.5 for front and back lol, lots of choices havent decided yet, what do you guys think? also, what should i do for the offset? it comes 35mm ET or 20mm ET, mind you this car is dropped about an inch, and i dont want any rubbing or to have to roll the fenders.. and lastly... 5x120, 5x114 or 5x112 are the bolt patterns...opinions?
#2195
Last edited by ZarkSniper; 06-15-2012 at 09:06 PM.
#2200
One of my rims has a pretty noticeable bend, and the way it's designed, several places I went to couldn't fix it. So I will never by 1 piece cast again.