Ichiba Spacers v2
though i dont have a 7th gen, i had 15mm spacers on my 6th gen with m45 19's on stock ride height. No issues.
Also, if anyone wants to know, i have inchibia v2 bolt on spacers for sale, used less than 5 months, only took out because i got 20's and the offlets were perfect.
m45 19" offset is +50 yikes
on a 6th gen, lol
Also, if anyone wants to know, i have inchibia v2 bolt on spacers for sale, used less than 5 months, only took out because i got 20's and the offlets were perfect.
m45 19" offset is +50 yikes
on a 6th gen, lolSpacers on a stock suspension will make it look more 4x4.
If anything try the 20mm on the rear and leave the front stock, or lower it.
The look of the car is so much better with the spacers and being lowered. I'm thinking of how to spend some Christmas money over and above some brake work I need and I'm thinking spacers and the Eibach Pro-Kit. Looking at the work some of you have done it seems like a no-brainer. But, my brain conjures a couple of questions:
1. Are you getting noticeable road splatter on your front and rear panels and if so are you thinking of doing something about it--like the Stillen rocker panels and something to intercept it in the rear.
2. Has anyone put spacers with a wider tire on the car. I'm thinking 255s and I tend to think this car would look really good with a taller/wider rear tire--approaching a look like the RSR Jaguar Lemans car. I don't see myself going there though.
1. Are you getting noticeable road splatter on your front and rear panels and if so are you thinking of doing something about it--like the Stillen rocker panels and something to intercept it in the rear.
2. Has anyone put spacers with a wider tire on the car. I'm thinking 255s and I tend to think this car would look really good with a taller/wider rear tire--approaching a look like the RSR Jaguar Lemans car. I don't see myself going there though.
Did you guys keep the OEM bolts with the V2 spacers? I've read on other forums that they switch out to ARP studs.
Also, do we have space in our cars to use the V1 spacers? I'm just curious. I'm not planning to lower the car so I'm thinking that a less aggressive spacing would not make my car look 4x4.
Also, do we have space in our cars to use the V1 spacers? I'm just curious. I'm not planning to lower the car so I'm thinking that a less aggressive spacing would not make my car look 4x4.
Spacers are fine provided you use a quality product which is installed correctly. I race with the SCCA and can tell you there are many many race cars running spacers. If race cars can run endurance races on spacers, I'm sure its just fine for street use.
Thread
Thread Starter
Forum
Replies
Last Post
Maxboy23
5th Generation Maxima (2000-2003)
7
Aug 11, 2015 11:59 AM




