Need help guys!
Thread Starter
Member
Joined: Apr 2012
Posts: 200
From: Brooklyn, NY
Need help guys!
Hey guys i decided to mess around with my interior but stumbled across a huge problem... I cant find a way to take out the trim piece where the shift **** is to continue my project. if anyone got any info on how to do that it would be appreciate. Thanks
Last edited by Timmy; Oct 5, 2012 at 03:34 PM.
Senior Member
Joined: Jul 2011
Posts: 613
From: Toronto, ON
Hey Timmy,
first remove the shift **** by sliding the chrome plastic piece down. then remove the c-clip with a needle nose.
then check out this link and go to page 16...this is what i used to disassemble when i did it.
http://www.nicoclub.com/FSM/maxima/2010/IP.pdf
hope it helps
first remove the shift **** by sliding the chrome plastic piece down. then remove the c-clip with a needle nose.
then check out this link and go to page 16...this is what i used to disassemble when i did it.
http://www.nicoclub.com/FSM/maxima/2010/IP.pdf
hope it helps
Thread Starter
Member
Joined: Apr 2012
Posts: 200
From: Brooklyn, NY
Hey Timmy,
first remove the shift **** by sliding the chrome plastic piece down. then remove the c-clip with a needle nose.
then check out this link and go to page 16...this is what i used to disassemble when i did it.
http://www.nicoclub.com/FSM/maxima/2010/IP.pdf
hope it helps
first remove the shift **** by sliding the chrome plastic piece down. then remove the c-clip with a needle nose.
then check out this link and go to page 16...this is what i used to disassemble when i did it.
http://www.nicoclub.com/FSM/maxima/2010/IP.pdf
hope it helps
Last edited by Timmy; Oct 6, 2012 at 12:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Max139617
5th Generation Classifieds (2000-2003)
1
Sep 6, 2015 06:02 PM