7th Generation Maxima (2009-2015) Come in and talk about the 7th generation Maxima

Unbelievable

Thread Tools
 
Search this Thread
 
Old Jun 1, 2015 | 10:00 AM
  #1  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Unbelievable

Hey guys. I need to vent. I just replaced my 4th wheel bearing on my 10 MAX SV. I baby my car and take care of it. It has 83k on it and i do some serious highway driving. I have now replaced 4 wheel bearings with the rear drivers side still original. The drivers side front is on its third bearing. This must be a Maxima issue. At this point it has to be a faulty part rather than my driving. Comments suggestions?
Old Jun 1, 2015 | 10:12 AM
  #2  
Richard66's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 1,690
I don't think this is a Maxima issue as there would be a flood of complaints here. I would look into how much of the bearing is being replaced, who is doing the work, and the quality of the parts being used.

One thing that works for me is if something fails, I change out the other one also if its a left side right side sort of thing.
Old Jun 1, 2015 | 10:38 AM
  #3  
mikekay's Avatar
Member
 
Joined: Apr 2015
Posts: 250
My first question is how you know its the wheel bearing?
Old Jun 1, 2015 | 11:13 AM
  #4  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
I've gotten the wheel bearings replaced at Firestone. Two different Firestones have replaced the wheel bearings. After each repair, I don't hear anymore noise. I get charged about $228 for each wheel bearing. I guess i just have bad luck.
Old Jun 1, 2015 | 11:19 AM
  #5  
Fakie J Farkerton's Avatar
Senior Member
iTrader: (51)
 
Joined: Apr 2012
Posts: 5,189
From: KCK
Did they replace the hub as well or just press in a new bearing each time?
Old Jun 1, 2015 | 12:49 PM
  #6  
dmcmahan12's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 355
From: Huntsville, AL
And if Firestone did the work will they not warranty the work they have done before. What name brand bearings are they using would be the question too. I used to work at a Firestone and some of the mechanics that work there are questionable. Hope you get it figured out.
Old Jun 1, 2015 | 04:07 PM
  #7  
1996blackmax's Avatar
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Jan 2003
Posts: 4,532
From: San Diego, Ca
Originally Posted by Fakie J Farkerton
Did they replace the hub as well or just press in a new bearing each time?


Good question
Old Jun 1, 2015 | 04:39 PM
  #8  
ThinBlue82's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2013
Posts: 560
From: Maryland
Should've just went to the dealer to have it done. Sometimes those places use cheap aftermarket parts rather than nissan parts. I had my front passenger side bearing replaced and it's been fine.

Lastly, at what point did your bearings begin to fail because it was covered under thr 5yr/60k powertrain warranty through nissan which makes me think you spent money to replace the earlier bearing for no reason.
Old Jun 1, 2015 | 05:22 PM
  #9  
MaximaDrvr's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,269
From: Charlotte, NC
134k miles on mine, with wide wheels and lowered suspension, and original bearings.
I would replace the hub, as something is clearly not correct.
Old Jun 3, 2015 | 07:28 PM
  #10  
CorollaULEV's Avatar
Senior Member
 
Joined: Jan 2005
Posts: 423
From: Bristol, VA
Yup. 148k mi here. Every original except oil, transmission fluid, brakes and tires. Wheel bearings are not a common problem on these vehicles...someone is doing bad work or not checkijg the right things.
Old Jun 4, 2015 | 05:27 AM
  #11  
Rider's Avatar
Member
 
Joined: May 2008
Posts: 160
From: Grand Rapids MI
Are you lowered or stock height?
Old Jun 6, 2015 | 06:48 AM
  #12  
bk2k3max's Avatar
Senior Member
 
Joined: Dec 2004
Posts: 1,055
150K plus on mine and no problems whatsoever with wheel bearings/hubs or anything else major on this car that I've had brand new since 2009, thank God.

Always take your car to the dealer for major repairs, the reason is that they will often warranty the work/if not, at least the parts will be covered.

Minor stuff like oil and fluid changes, along with brakes, hoses and filters aren't a big biggie if you take them to somewhere else but always do your major repairs at Nissan.
Old Jun 6, 2015 | 09:42 AM
  #13  
13Maximasv's Avatar
Senior Member
 
Joined: Mar 2013
Posts: 802
Originally Posted by CorollaULEV
Yup. 148k mi here. Every original except oil, transmission fluid, brakes and tires. Wheel bearings are not a common problem on these vehicles...someone is doing bad work or not checkijg the right things.
At what mileage did you change the CVT fluid ? 6 years and ~150K on the coolant is a lot, how do the belts look ?
Old Jun 6, 2015 | 10:29 AM
  #14  
LtLeary's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 1,847
From: Central Florida
290,000 here and never had a wheel bearing problem. Original belts and pulleys until 250,000 and I only replaced those as a preventive measure.
Old Jun 17, 2015 | 06:32 AM
  #15  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by Fakie J Farkerton
Did they replace the hub as well or just press in a new bearing each time?


All I can say is that the wheel bearing was replaced. I don't know the specifics. Sorry.
Old Jun 17, 2015 | 06:34 AM
  #16  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by dmcmahan12
And if Firestone did the work will they not warranty the work they have done before. What name brand bearings are they using would be the question too. I used to work at a Firestone and some of the mechanics that work there are questionable. Hope you get it figured out.


I had a wheel bearing go out 7 months and 15,500 miles after they replaced one, and they covered it under warranty.
Old Jun 17, 2015 | 06:36 AM
  #17  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by ThinBlue82
Should've just went to the dealer to have it done. Sometimes those places use cheap aftermarket parts rather than nissan parts. I had my front passenger side bearing replaced and it's been fine.

Lastly, at what point did your bearings begin to fail because it was covered under thr 5yr/60k powertrain warranty through nissan which makes me think you spent money to replace the earlier bearing for no reason.


You are correct. For my first wheel bearing I did not know that the wheel bearing was part of the powertrain warranty. I did eat that cost. I learned my lesson.
Old Jun 17, 2015 | 06:37 AM
  #18  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by Rider
Are you lowered or stock height?


Stock height.
Old Jun 17, 2015 | 06:38 AM
  #19  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by bk2k3max
150K plus on mine and no problems whatsoever with wheel bearings/hubs or anything else major on this car that I've had brand new since 2009, thank God.

Always take your car to the dealer for major repairs, the reason is that they will often warranty the work/if not, at least the parts will be covered.

Minor stuff like oil and fluid changes, along with brakes, hoses and filters aren't a big biggie if you take them to somewhere else but always do your major repairs at Nissan.


I agree with everything your saying, but I just never considered a wheel bearing a "major repair".
Old Jun 17, 2015 | 06:43 AM
  #20  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by LtLeary
290,000 here and never had a wheel bearing problem. Original belts and pulleys until 250,000 and I only replaced those as a preventive measure.


Sounds like everything has been working out for you. Good to hear. How often do you replace your CVT fluid?I plan on doing mine at 105k? What do you think? I do serious highway driving. I do 170 a day just for work purposes.
Old Jun 17, 2015 | 09:21 AM
  #21  
Daaavid's Avatar
Senior Member
 
Joined: May 2014
Posts: 302
From: Houston, TX
Originally Posted by LSExplorer22
Sounds like everything has been working out for you. Good to hear. How often do you replace your CVT fluid?I plan on doing mine at 105k? What do you think? I do serious highway driving. I do 170 a day just for work purposes.
Do you get caught in stop-and-go traffic and what is the ambient temperature as you drive? It is recommended to change the fluid in intervals starting as low as 30K-60K. When was the last time it was changed? Easiest way to is to check the transmission fluid dipstick and see if it's nearing that time, but if you're just cruising on the highway going a little bit over the speed limit at most, you're probably in better shape than most people who only drive their cars in the city.
Old Jun 17, 2015 | 12:40 PM
  #22  
LSExplorer22's Avatar
Thread Starter
Member
 
Joined: Dec 2013
Posts: 103
From: NE Ohio
Originally Posted by Daaavid
Do you get caught in stop-and-go traffic and what is the ambient temperature as you drive? It is recommended to change the fluid in intervals starting as low as 30K-60K. When was the last time it was changed? Easiest way to is to check the transmission fluid dipstick and see if it's nearing that time, but if you're just cruising on the highway going a little bit over the speed limit at most, you're probably in better shape than most people who only drive their cars in the city.


I hardly get caught in stop and go traffic. Living in NE Ohio it literally got as cold as -22 f and as high this year as 88 f. I go through all temperature extremes. I currently have 85k and I have not touched the tranny fluid at all.
Old Jun 18, 2015 | 12:22 PM
  #23  
LtLeary's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 1,847
From: Central Florida
Originally Posted by LSExplorer22
Sounds like everything has been working out for you. Good to hear. How often do you replace your CVT fluid?I plan on doing mine at 105k? What do you think? I do serious highway driving. I do 170 a day just for work purposes.
Just like you about 180 miles a day and drain and fill every 60,000m
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92drexel
5th Generation Maxima (2000-2003)
13
Dec 2, 2002 05:11 PM
Y2KevSE
5th Generation Maxima (2000-2003)
92
Sep 19, 2002 10:49 PM




All times are GMT -7. The time now is 12:56 AM.