7th Generation Maxima (2009-2015) Come in and talk about the 7th generation Maxima

Lens shattered

Thread Tools
 
Search this Thread
 
Old Jun 23, 2016 | 07:01 AM
  #1  
barmann88's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2016
Posts: 12
From: Missouri
Lens shattered

Where is the best place to buy a replacement lens for a 09 maxima drivers side fog light. Im assuming a rock hit the light, it has a hole and is now shattered.


Called the dealer they want 151.09 with a bulb


Only nisssan/com or something like that wants 143.00


Found some on ebay, drivers side and passenger side for 35.00 with a h11 halogen bulbs.


Ideas or comments.




Thanks
Brett
Old Jun 23, 2016 | 07:04 AM
  #2  
dmcmahan12's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 355
From: Huntsville, AL
Welcome aboard and sounds like you are on the right track already. If you don't want to spend the money then get the one off of Ebay and problem solved.
http://www.protuninglab.com/09nimaoe...d=140843039578
Old Jun 23, 2016 | 08:07 AM
  #3  
fame126's Avatar
Member
 
Joined: Nov 2014
Posts: 121
Have the same problem. Let me know which route you go and installation process
Old Jun 23, 2016 | 09:28 AM
  #4  
barmann88's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2016
Posts: 12
From: Missouri
Is there any place that just sells the lens its self? Or do I have to buy the whole assembly.


Thanks
Old Jun 23, 2016 | 10:00 AM
  #5  
barmann88's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2016
Posts: 12
From: Missouri
Just ordered these


http://www.ebay.com/itm/131286846915


will let everyone know how they fit and install beer time
Old Jun 23, 2016 | 10:07 AM
  #6  
588mph's Avatar
Newbie - Just Registered
 
Joined: May 2016
Posts: 4
You guys might want to try investing in the Morimoto XB LED fogs. They are made of High Impact Polycarb as opposed to the OEM glass fogs. I've replaced the OEM fogs over four times and I have yet to replace these polybarb ones.
Old Jun 23, 2016 | 01:16 PM
  #7  
Richard66's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 1,690
Originally Posted by barmann88
Just ordered these


http://www.ebay.com/itm/131286846915


will let everyone know how they fit and install beer time
Make sure you install a film cover on the lens to protect it. I used film from Lamin-X.
Old Jun 24, 2016 | 10:55 AM
  #8  
2young2retire's Avatar
Senior Member
 
Joined: May 2009
Posts: 546
From: Hot Springs Village, AR
Just go to a local wrecking yard and get one out of a wrecked vehicle. It will be cheap and you know it will fit.
Old Jun 24, 2016 | 01:35 PM
  #9  
fame126's Avatar
Member
 
Joined: Nov 2014
Posts: 121
Originally Posted by Richard66
Make sure you install a film cover on the lens to protect it. I used film from Lamin-X.
howcome?
Old Jun 24, 2016 | 08:52 PM
  #10  
Richard66's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 1,690
Originally Posted by fame126
howcome?
The film protects the lens from road hazards like rocks.
Old Jul 18, 2016 | 09:20 AM
  #11  
barmann88's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2016
Posts: 12
From: Missouri
Install time was literally two minutes. Two screws and the lamps came right out. The ebay lamps were exactly like the factory ones. It took me longer to pull all the tabs to get the plastic down to get to the lights.




Easy as pie anyone can do it. They took a torq screw, but I did not pay attention to the size.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Prophecy99
5th Generation Maxima (2000-2003)
27
Feb 10, 2017 09:44 AM
valerit1
7th Generation Maxima (2009-2015)
4
May 19, 2016 04:13 PM
sebastian2041
5th Generation Maxima (2000-2003)
5
Feb 28, 2016 08:36 PM
RussMaxManiac
General Maxima Discussion
15
Sep 6, 2000 06:13 AM
buss95max
General Maxima Discussion
8
Sep 4, 2000 04:02 AM




All times are GMT -7. The time now is 07:52 PM.