Extrude Hone a VQ35 Intake Manifold?
06-29-2006, 10:11 PM
#81
Originally Posted by GoalieKeg
Nevermind, I changed my mind. 
i'll also point out to try and find out what's MISSING in the picture - that's the biggest clue.
06-29-2006, 10:13 PM
#82
Originally Posted by b00b
Just let the dang IM be kept secret. For those who figured it out, just let it be and keep it to yourself. SR20DEN created it and does not want anyone to know so lets just keep it that way. But that picture is all you need to figure it out.
Got your car running right yet?
06-29-2006, 10:15 PM
#83
Originally Posted by tavarish
Got your car running right yet?
06-29-2006, 10:17 PM
#84
Originally Posted by Biggs_02
motor is out of car and gonna put it back in tomorrow with timing chain and cover and stuff from a different vq30. Hopefully it'll be running great afterwards.
06-29-2006, 10:56 PM
#86
Originally Posted by Biggs_02
same person...lol he's my bro
I'm gonna end up sellin my 350z mani. the 2k3 makes more than enough power.
06-29-2006, 11:11 PM
#88
i'm selling mine too, it got sandblasted and everything comes with new gasket too. but yeah....sib....his friend busted my y-pipe and is refusing to pay for it...he ran overr a piece of plywood when test driving my car and he said he won't pay for it becaue his mechanic said it was "old"
06-29-2006, 11:22 PM
#89
Originally Posted by Biggs_02
i'm selling mine too, it got sandblasted and everything comes with new gasket too. but yeah....sib....his friend busted my y-pipe and is refusing to pay for it...he ran overr a piece of plywood when test driving my car and he said he won't pay for it becaue his mechanic said it was "old"
This is exactly the reason no one drives my car but me.
06-29-2006, 11:49 PM
#92
So are you planning to expose the secret like the other punks on the forum? Yeah, we are brothers but I own the car. The old timing case stuff was from a car with a bad motor so that might have been the problem. We managed to pick up a fully fuctional motor for $50 from my friend who did a DEK swap.
..
,,, 
06-30-2006, 08:35 AM
#95
Originally Posted by b00b
So are you planning to expose the secret like the other punks on the forum? Yeah, we are brothers but I own the car. The old timing case stuff was from a car with a bad motor so that might have been the problem. We managed to pick up a fully fuctional motor for $50 from my friend who did a DEK swap.
It sounded like the timing was off hardcore. What exactly was wrong with the bad motor? I'm asking in case I ever get a blown vq30. Good luck with the car, man.
06-30-2006, 07:43 PM
#96
Originally Posted by steven88
heres one from Maxus 2005
Which i already junked...
What is done inside the manifold to increase its performance? Obviously SR20DEN doesnt have the ability to extrude hone the manifold unless he has one stupid good dremel tool..........
And thanks for all the flaming
Kamski
07-01-2006, 08:06 AM
#98
Originally Posted by kamilkluczewski
Other then the fact that the cheap piece of sheet cover is missing..............
Which i already junked...
What is done inside the manifold to increase its performance? Obviously SR20DEN doesnt have the ability to extrude hone the manifold unless he has one stupid good dremel tool..........
And thanks for all the flaming
Kamski
Which i already junked...
What is done inside the manifold to increase its performance? Obviously SR20DEN doesnt have the ability to extrude hone the manifold unless he has one stupid good dremel tool..........
And thanks for all the flaming
Kamski
07-02-2006, 04:10 PM
#99
Originally Posted by tavarish
find out what's missing, then put 2 and 2 together. the engine cover is missing, but it doesnt give any gains.
Tavarish if u have nothing to add then pashal von!
Whats missing I see the shield off, now SR20DEN is saying the stuff was on there.......
265 WHP is a very impressive number!! Obviously I dont have the skill yet to dissasemble and reassemble a VQ35 motor but thats why I came here to get help from the people I know that have those skills.
Kam
07-02-2006, 04:15 PM
#101
Originally Posted by SR20DEN
Because many of us are IT personell. 
Thank god I only have a few months left working in IT then.....
Anywhoo, how did u come up with the hone type mod to the IM just a fluke when u took it apart?
Kamski
07-02-2006, 05:24 PM
#102
Originally Posted by kamilkluczewski
And i also assume you hate windows...... go linux type of personallities.
Thank god I only have a few months left working in IT then.....
Anywhoo, how did u come up with the hone type mod to the IM just a fluke when u took it apart?
Kamski
Thank god I only have a few months left working in IT then.....
Anywhoo, how did u come up with the hone type mod to the IM just a fluke when u took it apart?
Kamski
07-02-2006, 05:32 PM
#103
Originally Posted by kamilkluczewski
And i also assume you hate windows...... go linux type of personallities.
Thank god I only have a few months left working in IT then.....
Anywhoo, how did u come up with the hone type mod to the IM just a fluke when u took it apart?
Kamski
Thank god I only have a few months left working in IT then.....
Anywhoo, how did u come up with the hone type mod to the IM just a fluke when u took it apart?
Kamski
07-03-2006, 09:22 AM
#104
Originally Posted by nismology
Have you even bothered to remove your IM to peek inside?
Originally Posted by kamilkluczewski
265 WHP is a very impressive number!! Obviously I dont have the skill yet to dissasemble and reassemble a VQ35 motor but thats why I came here to get help from the people I know that have those skills.
Kam
07-03-2006, 10:05 AM
#105
Originally Posted by Glude
Your beating a dead horse. Nobody is going to straight up tell you the secret IM mod. People are simply saying to do research, the info IS on these forums. I read forever before I even had a small idea of what it consist of and even now im still not 100% sure.
The answer's in your car, not on the forums.
07-03-2006, 10:19 AM
#106
Originally Posted by tavarish
That means you're going in the wrong direction. The mod should be a common sense mod, as in you just need the slightest bit of common sense to make it work. The answer's in your car, not on the forums.
The answer's in your car, not on the forums.
07-03-2006, 10:48 AM
#108
Originally Posted by tavarish
I can make you a SSIM for 300 bucks shipped.
07-03-2006, 10:51 AM
#109
$300 is a ripoff. I never charged anyone more than $200 for the work I did. And no you guys can't make SSIMs. You still don't know 100% what I did or not. Therfore you'll be making your own thing.
07-03-2006, 11:26 AM
#111
Originally Posted by vq356sp
Is it me or is something missing?????? besides the engine cover 
07-03-2006, 11:27 AM
#112
Originally Posted by SR20DEN
$300 is a ripoff. I never charged anyone more than $200 for the work I did. And no you guys can't make SSIMs. You still don't know 100% what I did or not. Therfore you'll be making your own thing.
Did you put an official SSIM stamp on it?
07-03-2006, 11:38 AM
#113
Honestly guys this hoopla over the SSIM is getting old. We all know he's not going to divulge what the SSIM is exactly, and I can understand that people would not understand why or may think it's unfair.
But from talking to him I believe he has some legitimate reasons for it, even if they are not apparent to all, or to those who do not know the history of the situation.
Besides, there is something to be said for pulling apart things yourself and figuring out how they work and how to make them better. You don't have to be an engineer or mechanic. Just spend an afternoon and take it step by step and pull the stock manifold off and look at it. If you have taken the time to look inside a FWD VQ35 manifold and think about how the air is flowing through there at high rpm and how you could modify it to get more air in, decrease restrictions/obstacles, and increase flow, then you will be most of the way there to having a manifold that is just as good as the SSIM. And you can call it your own name and sell it if you want, whatever.
Just my humble $0.02...
But from talking to him I believe he has some legitimate reasons for it, even if they are not apparent to all, or to those who do not know the history of the situation.
Besides, there is something to be said for pulling apart things yourself and figuring out how they work and how to make them better. You don't have to be an engineer or mechanic. Just spend an afternoon and take it step by step and pull the stock manifold off and look at it. If you have taken the time to look inside a FWD VQ35 manifold and think about how the air is flowing through there at high rpm and how you could modify it to get more air in, decrease restrictions/obstacles, and increase flow, then you will be most of the way there to having a manifold that is just as good as the SSIM. And you can call it your own name and sell it if you want, whatever.
Just my humble $0.02...
07-03-2006, 11:40 AM
#114
Supporting Maxima.org Member
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Originally Posted by SR20DEN
$300 is a ripoff. I never charged anyone more than $200 for the work I did. And no you guys can't make SSIMs. You still don't know 100% what I did or not. Therfore you'll be making your own thing.
07-03-2006, 12:44 PM
#115
Originally Posted by SR20DEN
$300 is a ripoff. I never charged anyone more than $200 for the work I did. And no you guys can't make SSIMs. You still don't know 100% what I did or not. Therfore you'll be making your own thing.
07-03-2006, 10:47 PM
#116
Guest
Posts: n/a
seems to be half and half. throwing money is nice when you have it, but paying 200 or 300 for something that supposedly (judging by those pictures and what i think goes with what is missing) is very easy to do yourself. could even be free, dont have my car right now so i cant look.
07-05-2006, 01:05 PM
#118
Originally Posted by Nismo3112
I wouldn't say very easy.
Shows who has the scaly kaffer personalities doesnt it.???
Bah!
Me either.