How to remove Valves and valve springs.

Reply Subscribe

Thread Tools

Search this Thread

08-20-2006, 01:40 PM

MDeezy

Senior Member

Thread Starter

iTrader: (27)

Join Date: Feb 2004

Location: Atlanta

Posts: 33,720

How to remove Valves and valve springs.

Needing to remove the valves and valve springs from my 3.0 (spare). I'm mainly curious if there is an alternative method besides the one outlined in the FSM (soak in 130degree oil and strike with a punch).

I really just need to dis-assemble, it wont be put back together and parts wont be re-used, if that helps spark any creative ideas

08-20-2006, 02:38 PM

gtr_rider

192.168.1.1

iTrader: (50)

Join Date: Dec 2000

Location: Ft. Lauderdale, FL

Posts: 17,637

dynamite..?

08-20-2006, 02:48 PM

nismology

Supporting Maxima.org Member

iTrader: (8)

Join Date: Apr 2003

Location: Miami, FL

Posts: 9,116

Quote:

Originally Posted by MDeezy

The soaking thing is only if you want to remove the valve guides. To remove the valves just remove the lifter, get a spring compressor and compress the valve spring, remove the collets (locks) and relieve the tension SLOWLY. You can then remove the retainer and spring and the valve will slide right out. That long pin goes into the recessed area on the face of the valve and the other side grabs onto the spring.

This is the one i have. http://www.sears.com/sr/javasr/produ...seBVCookie=Yes