New VQ tech data for 2007
#41
Originally Posted by JClaw
Yes? And? Thats my point. If you want to swap the HR in a RWD car you dont have to deal with all that axle, transmission, whole front subframe crap. In a maxima it gets a hell of a lot more complicated.
why couldn't you just say "In a maxima it gets a hell of a lot more complicated."
#42
Originally Posted by nismology
Even then, i'd only swap in the short block and use ported DE heads since they bolt on.
Originally Posted by JClaw
Because of the new bellhousing this engine will be much easier to swap into a RWD car. The current Frontier VQ40DE 6-speed transmission bolts right up to a VQ35HR I believe.
Originally Posted by steven88
why couldn't you just say "In a maxima it gets a hell of a lot more complicated."
#43
Supporting Maxima.org Member
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Originally Posted by steven88
sorry if I missed something...but he asked if we can swap the HR into our maximas...I said "no it won't fit..unless you have alot of money to modify it"....then you said "Because of the new bellhousing this engine will be much easier to swap into a RWD car. The current Frontier VQ40DE 6-speed transmission bolts right up to a VQ35HR I believe."
why couldn't you just say "In a maxima it gets a hell of a lot more complicated."
why couldn't you just say "In a maxima it gets a hell of a lot more complicated."
#44
Supporting Maxima.org Member
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Originally Posted by ajcool2
OOOO makes my feet tangle.
People need to drop the stupid SR20DET and go for the VQ30DET
#47
I know this is bringing this thread back from the dead, BUT I thought I would update with some actual HR numbers.
Deck height is increased from 215mm to 223.4 ( +8.4mm)
Con rod was 144.15, is now 151.75mm (+7.6mm)
HR pistons are also have an increased compression height of .8mm
The 07-08 altima has the same higher flowing cylinder heads as the HR motor as well...
Deck height is increased from 215mm to 223.4 ( +8.4mm)
Con rod was 144.15, is now 151.75mm (+7.6mm)
HR pistons are also have an increased compression height of .8mm
The 07-08 altima has the same higher flowing cylinder heads as the HR motor as well...
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
Ben2003GLE
5th Generation Classifieds (2000-2003)
1
09-24-2015 04:25 PM
zzznightmarezz
Maximas for Sale / Wanted
0
09-21-2015 06:32 PM