hey guys i'm doing a vq35de swap from a 2k2 maxima into my 240sx. I'm having trouble finding some information on the dash harness. I am trying to just use the F3(dash harness connector from the ka engine harness) a wire it to the maxima harness to plug it in. What I want to do is trim dash harness down to just smart entrance, nats, e-gas from the maxima dash harness. Unfortunately since i purchased the dash harness from a member on this forum and not pull it my self from a junk car I don't know what connects to what and I was wondering if some one could help me out with a pinout info and the color of the wires?

the engine is from an 02 maxima but as far as intake, exhaust, water pipes, upper oil pan has all from an 03 350z.
the wire harness and underdash is from i think an 03 and the nats/smart entrance/nats/ignition is from an 02 maxima

also i forgot to add that i'm not going to be running A/C or p/s and i was wondering what i can do about that to make the ecu think it's working and not throw codes.

 

no ones done a 5.5 gen vq swap with full ecu???

 

phatg20.net

download the fsm's and start highlighting!