All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.
Sponsored by:
Sponsored by: CARiD

Rb26 maxima

Thread Tools
 
Search this Thread
 
Old Jul 29, 2009 | 09:32 PM
  #1  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Rb26 maxima

hey guys I wanted to post this for a while now but just got around to it I blew my vdq30 and wanted to do something different with my maxima that i don't think anyone has tried or I have not heard of doing to a maxima so I went out and bought the rb26dett engine and and do a transplant into my maxima. I am 2 months into the project and have pics that I will post on the weekend when I go home and yes the car will be rear wheel drive.
Old Jul 29, 2009 | 09:41 PM
  #2  
ojeda112's Avatar
Junior Member
 
Joined: Jul 2008
Posts: 29
From: SoCal
Originally Posted by MaxxKid
hey guys I wanted to post this for a while now but just got around to it I blew my vdq30 and wanted to do something different with my maxima that i don't think anyone has tried or I have not heard of doing to a maxima so I went out and bought the rb26dett engine and and do a transplant into my maxima. I am 2 months into the project and have pics that I will post on the weekend when I go home and yes the car will be rear wheel drive.
Keep us updated!
Old Jul 29, 2009 | 09:43 PM
  #3  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
will do the hardest part is the wireing by the way how to put up the pics on here
Old Jul 29, 2009 | 09:47 PM
  #4  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
so what rear subframe are you using? How are you planning to attach it to the body of the maxima.

what trans are you going to run?

why an rb26dett?

and why in a maxima?

how are you going to do your motor mounts and re do the front subframe?

Ill believe it when i see it.

to put pictures upload them to a site like imageshack or photobucket and then link them here.
Old Jul 29, 2009 | 09:54 PM
  #5  
ojeda112's Avatar
Junior Member
 
Joined: Jul 2008
Posts: 29
From: SoCal
Whats the estimate cost of this project?
Old Jul 29, 2009 | 09:57 PM
  #6  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by AceofSpds
so what rear subframe are you using? How are you planning to attach it to the body of the maxima.

what trans are you going to run?

why an rb26dett?

and why in a maxima?

how are you going to do your motor mounts and re do the front subframe?

Ill believe it when i see it.

to put pictures upload them to a site like imageshack or photobucket and then link them here.
its already attaxhed with a lot of custom work, I am running the rb25 tranny and as for why in a maxima no one expects it but the real reason is that there are a lot of imports making a name and it seems like everyone forgot about the maxima so I wanted to change that want to run wild on the streets
Old Jul 29, 2009 | 09:58 PM
  #7  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by ojeda112
Whats the estimate cost of this project?
well to be honest so far I spent 10k on it but there will be alot more
Old Jul 29, 2009 | 10:06 PM
  #8  
JAMAICANLOVRBOY's Avatar
Senior Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 710
From: beltsville MD
actually it has been done, practical?, no, but very do-able.i think the guy had to even modify his firewall....but i would luv to see this project completed.

Last edited by JAMAICANLOVRBOY; Jul 29, 2009 at 10:08 PM.
Old Jul 29, 2009 | 10:10 PM
  #9  
ojeda112's Avatar
Junior Member
 
Joined: Jul 2008
Posts: 29
From: SoCal
Originally Posted by MaxxKid
well to be honest so far I spent 10k on it but there will be alot more
Old Jul 29, 2009 | 10:32 PM
  #10  
xlcrew's Avatar
I’m Back
iTrader: (17)
 
Joined: Sep 2004
Posts: 1,524
From: Oklahoma City, OK
wow, will believe it when i see it. did you make it rear wheel drive or leave it front wheel? and as far as the maxima's not having a name for themselves, they do. they are known by car guys not JDM nutswingers. very interested in pics, and i guess my other question is why leave it a twin turbo, why not just make it a single?
Old Jul 29, 2009 | 11:02 PM
  #11  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
yeah im interested in seeing pictures of the engine cradle setup, how close the steering shaft/rack is to the turbos and down pipe, how the motor sits, the rear suspension of the car, and etc.

Im assuming the firewall has been cut a good bit, ive seen a few RB swapped cars and its always a tight squeeze.
Old Jul 29, 2009 | 11:05 PM
  #12  
perkman87's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2007
Posts: 737
From: West Palm Beach
Piktarrs
Old Jul 29, 2009 | 11:08 PM
  #13  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
Looking forward to hearing about how wild the streets have been ran.
Old Jul 29, 2009 | 11:21 PM
  #14  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by JAMAICANLOVRBOY
actually it has been done, practical?, no, but very do-able.i think the guy had to even modify his firewall....but i would luv to see this project completed.
yes I had to do it, it moved back into the car like 8 inchs
Old Jul 29, 2009 | 11:23 PM
  #15  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by xlcrew
wow, will believe it when i see it. did you make it rear wheel drive or leave it front wheel? and as far as the maxima's not having a name for themselves, they do. they are known by car guys not JDM nutswingers. very interested in pics, and i guess my other question is why leave it a twin turbo, why not just make it a single?
its rear wheel drive i used a j 30 back couldn't find a 240 at the scrap yard well the twin turbo is unique and the guys at the shop wanted it like that to prevent lag with aftermarket turbos, it was explained to me as having equal pressure in the cylinders

Last edited by MaxxKid; Jul 29, 2009 at 11:26 PM.
Old Jul 29, 2009 | 11:24 PM
  #16  
NismoVQdet?'s Avatar
Senior Member
 
Joined: Mar 2008
Posts: 731
From: Sacramento
wow always thought about doing this but never thought someone would actuality go through with it.. if you do finish this project and make it a reality i think you will become close to a God in the maxima community.. but thats if it happens of course.. keep us posted and good luck with the project!!
Old Jul 29, 2009 | 11:28 PM
  #17  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by AceofSpds
yeah im interested in seeing pictures of the engine cradle setup, how close the steering shaft/rack is to the turbos and down pipe, how the motor sits, the rear suspension of the car, and etc.

Im assuming the firewall has been cut a good bit, ive seen a few RB swapped cars and its always a tight squeeze.
yes its a tight fit but its clean fit the down pipe had to be custom and the steering also was a pain but they got it
Old Jul 29, 2009 | 11:29 PM
  #18  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
Originally Posted by MaxxKid
its rear wheel drive i used a j 30 back couldn't find a 240 at the scrap yard well the twin turbo is unique and the guys at the shop wanted it like that to prevent lag with aftermarket turbos, it was explained to me as having equal pressure in the cylinders
Got any pics?
Old Jul 29, 2009 | 11:31 PM
  #19  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
here is my littil set up for now apex power fc, plx wideband, aem methonal/water injection system 2 gt35 which will be change to 45's at some point, and want to add a nitrous kit at some time
Old Jul 29, 2009 | 11:33 PM
  #20  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by SEmy2K2go
Got any pics?
pics will be added on the weekend hey flava 247 have been helping me along the way so give him his bumps he knows his stuff
Old Jul 29, 2009 | 11:39 PM
  #21  
perkman87's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2007
Posts: 737
From: West Palm Beach
go outside and take a pic with your phone damnnnnnnit..we need em to survive
Old Jul 30, 2009 | 06:00 AM
  #22  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
i got pics of everything the mounts hope you guys support me on my project
Old Jul 30, 2009 | 06:04 AM
  #23  
321VQ35MAX's Avatar
Senior Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 10,436
From: Sanford, FL
Seems like an adventure.... keep us posted....
Old Jul 30, 2009 | 06:12 AM
  #24  
dfownz's Avatar
Senior Member
iTrader: (5)
 
Joined: Apr 2006
Posts: 780
From: Eastern Mississippi
Old Jul 30, 2009 | 07:10 AM
  #25  
tibal's Avatar
Senior Member
iTrader: (15)
 
Joined: Aug 2007
Posts: 819
From: Franklin, Ma
pics pics pics!!! :P
Old Jul 30, 2009 | 07:11 AM
  #26  
321VQ35MAX's Avatar
Senior Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 10,436
From: Sanford, FL
Originally Posted by dfownz

That would be great....
Old Jul 30, 2009 | 07:39 AM
  #27  
mightyMax95's Avatar
Senior Member
iTrader: (5)
 
Joined: Oct 2008
Posts: 981
From: Houston, TX
doesn't count if you have somebody else/shop do it.

oh, and pics please.
Old Jul 30, 2009 | 09:51 AM
  #28  
ajcool2's Avatar
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
I sure hope this is real. Goodluck if it is.
Old Jul 30, 2009 | 09:53 AM
  #29  
pmohr's Avatar
No more Maximas...
iTrader: (26)
 
Joined: Jul 2005
Posts: 14,329
From: Oak Ridge, TN
Originally Posted by ajcool2
I sure hope this is real. Goodluck if it is.
Indeed. I figure this it'll either turn out like the twin turbo 4th gen/every other VQ35 swapped J30 before Aaron, or like Jime shocking us with the 10's.

It'll really turn out to be one extreme or the other.
Old Jul 30, 2009 | 11:32 AM
  #30  
maxine'sMan's Avatar
Supporting Maxima.org Member
iTrader: (6)
 
Joined: May 2006
Posts: 363
From: Toronto, ON
hmm brooklyn huh? I smell traffic blockin'..
Old Jul 30, 2009 | 12:12 PM
  #31  
95 maxima se's Avatar
Silver Tooth S2K 9k FTMFW
iTrader: (22)
 
Joined: Oct 2005
Posts: 2,208
From: Austin,TX
ill be sending you a dollar with paypal asap!!! first i wanna see a video
Old Jul 30, 2009 | 12:57 PM
  #32  
secondtonone317's Avatar
nycnissans
iTrader: (12)
 
Joined: Oct 2006
Posts: 1,595
From: Queens, NY
interesting.......pics please
Old Jul 30, 2009 | 01:01 PM
  #33  
MoncefA33's Avatar
Senior Member
iTrader: (6)
 
Joined: May 2008
Posts: 1,982
Pics or lock
Old Jul 30, 2009 | 01:16 PM
  #34  
RacerX1320's Avatar
Senior Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 584
Pic pic pic pic . .. .

* Aaaah NY streets DO tend to run a bit wild.....or so ive heard.
Old Jul 30, 2009 | 01:39 PM
  #35  
mtrai760's Avatar
'Trynna' is not a word
iTrader: (19)
 
Joined: Mar 2001
Posts: 7,079
From: Seattle Area, WA
Countdown: 82.5 hours till the lock.
Old Jul 30, 2009 | 01:48 PM
  #36  
DrunkieTheBear's Avatar
Turbo'd Saab
iTrader: (17)
 
Joined: Feb 2007
Posts: 35,852
From: Albany, NY
I'm close by...let me know I'll come help you
Old Jul 30, 2009 | 02:03 PM
  #37  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by ajcool2
I sure hope this is real. Goodluck if it is.
it is real
Old Jul 30, 2009 | 02:05 PM
  #38  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by MoncefA33
Pics or lock
pice will be posted on the week end when i get home
Old Jul 30, 2009 | 02:07 PM
  #39  
MaxxKid's Avatar
Thread Starter
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
Originally Posted by 95 maxima se
ill be sending you a dollar with paypal asap!!! first i wanna see a video
video willl be at the first start up
Old Jul 30, 2009 | 02:20 PM
  #40  
vernk's Avatar
Senior Member
 
Joined: Apr 2007
Posts: 1,323
From: Albuquerque, NM
could you take some pics of the vdq30 I'v never heard of that engine, I'v seen a VG, VQ, VH, KA, RB, VE, GA, SR



All times are GMT -7. The time now is 07:47 AM.