Attn:MaximaDave or expierienced
08-30-2002, 09:24 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Posts: 18
Attn:MaximaDave or expierienced
First of all thanks for all the help that you have givin me by other posted threads. I just got the rest of my equipment. 2 Alpine Type r's and a RF700s. I am installing these tom. BUt my problem is I am also going to be running a PPI460IX to power my internal speakers. Now my questin is can u run the 2 power wires onto the battery terminal? I going to be running a 8g for the PPI and 4g for the RF but got confused about running 2 power wires. THansks in advance for all your help.
Stereo:
ALpine 7893 (HU)
Pioneer Sperates (Front speakers)
Pioneer 6x9 220W(Rear)
PPI 460IX(4 ch. Amp)
2-ALpine Type R 12"
RF 700s Punch(sub Amp)
Stereo:
ALpine 7893 (HU)
Pioneer Sperates (Front speakers)
Pioneer 6x9 220W(Rear)
PPI 460IX(4 ch. Amp)
2-ALpine Type R 12"
RF 700s Punch(sub Amp)
08-30-2002, 11:19 PM
#2
Senior Member
Join Date: Jul 2001
Posts: 482
Re: Attn:MaximaDave or expierienced
Originally posted by surfwrv32
First of all thanks for all the help that you have givin me by other posted threads. I just got the rest of my equipment. 2 Alpine Type r's and a RF700s. I am installing these tom. BUt my problem is I am also going to be running a PPI460IX to power my internal speakers. Now my questin is can u run the 2 power wires onto the battery terminal? I going to be running a 8g for the PPI and 4g for the RF but got confused about running 2 power wires. THansks in advance for all your help.
Stereo:
ALpine 7893 (HU)
Pioneer Sperates (Front speakers)
Pioneer 6x9 220W(Rear)
PPI 460IX(4 ch. Amp)
2-ALpine Type R 12"
RF 700s Punch(sub Amp)
First of all thanks for all the help that you have givin me by other posted threads. I just got the rest of my equipment. 2 Alpine Type r's and a RF700s. I am installing these tom. BUt my problem is I am also going to be running a PPI460IX to power my internal speakers. Now my questin is can u run the 2 power wires onto the battery terminal? I going to be running a 8g for the PPI and 4g for the RF but got confused about running 2 power wires. THansks in advance for all your help.
Stereo:
ALpine 7893 (HU)
Pioneer Sperates (Front speakers)
Pioneer 6x9 220W(Rear)
PPI 460IX(4 ch. Amp)
2-ALpine Type R 12"
RF 700s Punch(sub Amp)
eric
08-31-2002, 09:20 AM
#3
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,671
Re: Re: Attn:MaximaDave or expierienced
Originally posted by nismo240sx
best idea (if you can manage it) is to use a single 2 gauge wire, and put a distribution block in, and then run whatever gauge you can from the block to each amp. much cleaner looking, easier to add bigger amps later.
eric
best idea (if you can manage it) is to use a single 2 gauge wire, and put a distribution block in, and then run whatever gauge you can from the block to each amp. much cleaner looking, easier to add bigger amps later.
eric
--Don
08-31-2002, 10:14 AM
#4
Re: Re: Attn:MaximaDave or expierienced
Originally posted by nismo240sx
best idea (if you can manage it) is to use a single 2 gauge wire, and put a distribution block in, and then run whatever gauge you can from the block to each amp. much cleaner looking, easier to add bigger amps later.
eric
best idea (if you can manage it) is to use a single 2 gauge wire, and put a distribution block in, and then run whatever gauge you can from the block to each amp. much cleaner looking, easier to add bigger amps later.
eric
Thread
Thread Starter
Forum
Replies
Last Post