powering speaker
powering speaker
would an amp with 75w rms x 4 @ 4ohms be adequate to power......
Infinity kappa perfect 6.1 (component) rms 100w max power 400w
and
Infinity kappa 693.5i (6x9) rms 110w max power 330w
Or would I need more juice to em?
Thanks guys
Infinity kappa perfect 6.1 (component) rms 100w max power 400w
and
Infinity kappa 693.5i (6x9) rms 110w max power 330w
Or would I need more juice to em?
Thanks guys
Re: powering speaker
Originally posted by Vumax_1
would an amp with 75w rms x 4 @ 4ohms be adequate to power......
Infinity kappa perfect 6.1 (component) rms 100w max power 400w
and
Infinity kappa 693.5i (6x9) rms 110w max power 330w
Or would I need more juice to em?
Thanks guys
would an amp with 75w rms x 4 @ 4ohms be adequate to power......
Infinity kappa perfect 6.1 (component) rms 100w max power 400w
and
Infinity kappa 693.5i (6x9) rms 110w max power 330w
Or would I need more juice to em?
Thanks guys
--Don
Amp wattage
I tell this to every one...amps are tested at full gain....I always try to get a little higher wattage just to keep my gains down. The less you have increase your gain the cleaner and less distorted teh signal will be to your speakers. That's my two sense. Personally I hope that nobody's runnin their amps at full gain.
/////\ZN2DMAX
/////\ZN2DMAX
Re: Amp wattage
Originally posted by AZN2DMAX
I tell this to every one...amps are tested at full gain....I always try to get a little higher wattage just to keep my gains down. The less you have increase your gain the cleaner and less distorted teh signal will be to your speakers. That's my two sense. Personally I hope that nobody's runnin their amps at full gain.
/////\ZN2DMAX
I tell this to every one...amps are tested at full gain....I always try to get a little higher wattage just to keep my gains down. The less you have increase your gain the cleaner and less distorted teh signal will be to your speakers. That's my two sense. Personally I hope that nobody's runnin their amps at full gain.
/////\ZN2DMAX
Sorry AZN2DMAX, but flame me all you want. I'm guess I must be dumb as a door ****, but could you explain a little more on what you mean?
So...if I have those speakers, should I go 100w rms x 4 @ 4ohms then?
Thanks again,
Thread
Thread Starter
Forum
Replies
Last Post
magiconthetire
Audio and Electronics
2
Oct 26, 2015 09:03 PM



