Before I start, let me say that I did search:


Help! Plug Adapter For 2K2 Bose Amp
http://forums.maxima.org/showthread....ht=bose+wiring

No need to run wires to doors in 2k-2k3 models
http://forums.maxima.org/showthread....ht=bose+wiring

HELP! 2K2 Bose Issue/Question
http://forums.maxima.org/showthread....ht=bose+wiring

Began install...comments/questions
http://forums.maxima.org/showthread....5&pagenumber=1

Hole for speaker wire......
http://forums.maxima.org/showthread....ighlight=gauge


..but didn't find the answers I was looking for. So here goes:

1) When installing components on a 5th Gen with Bose and using the factory wiring, do you have 2 different sets of wires coming out of the amp for both the front tweeters and the woofers? Or does the wire for the tweeter connect inside the door?

2) Does the factory wiring for the Bose system run down the driver side in the plastic conduit under the trim? If so, is there a concern of noise because everyone (including me) runs their amp wire in that location?

3) In a worst case scenario, I will run new speaker wires. Most people say that it is impossible to run to the front doors without drilling because of the molex connector. Others say they have been able to do it through the grommet? What's the deal?

I'm looking to upgrade all the speakers in the car and amp them this weekend (I've already got a new head unit, sub & amp but I don't want to go through the nightmare of running new wires to all the speakers (components front and back).

Any help would be appreciated!