AOEM-NIS2 to Keeping stock bose h/u and adding amp
02-17-2004, 11:55 AM
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Franklinville, NJ
Posts: 1,092
AOEM-NIS2 to Keeping stock bose h/u and adding amp
Hey all,
I currently have a pair of 12 inch infinity subs hooked up to my stock bose stereo system. Problem is i used a speaker level converter (see picture at bottom of this thread to see my current set up) and the converter does not create a strong enoff signal for the subs to really perform to their potential. I have been told that the AOEM-NIS2 (Click here to view were i can get the AOEM-NIS2) works well and there are no problems. I just want to be sure that this thing WILL do the trick, i really want my subs to sound like they did in my old car.
Thanks in advanced!
-Tom
*Note: The speaker level converter is the blue device located at the top of the picture in the middle.
I currently have a pair of 12 inch infinity subs hooked up to my stock bose stereo system. Problem is i used a speaker level converter (see picture at bottom of this thread to see my current set up) and the converter does not create a strong enoff signal for the subs to really perform to their potential. I have been told that the AOEM-NIS2 (Click here to view were i can get the AOEM-NIS2) works well and there are no problems. I just want to be sure that this thing WILL do the trick, i really want my subs to sound like they did in my old car.
Thanks in advanced!
-Tom
*Note: The speaker level converter is the blue device located at the top of the picture in the middle.
02-17-2004, 01:35 PM
#2
Originally Posted by gto400no1
Hey all,
I currently have a pair of 12 inch infinity subs hooked up to my stock bose stereo system. Problem is i used a speaker level converter (see picture at bottom of this thread to see my current set up) and the converter does not create a strong enoff signal for the subs to really perform to their potential. I have been told that the AOEM-NIS2 (Click here to view were i can get the AOEM-NIS2) works well and there are no problems. I just want to be sure that this thing WILL do the trick, i really want my subs to sound like they did in my old car.
Thanks in advanced!
-Tom
*Note: The speaker level converter is the blue device located at the top of the picture in the middle.
I currently have a pair of 12 inch infinity subs hooked up to my stock bose stereo system. Problem is i used a speaker level converter (see picture at bottom of this thread to see my current set up) and the converter does not create a strong enoff signal for the subs to really perform to their potential. I have been told that the AOEM-NIS2 (Click here to view were i can get the AOEM-NIS2) works well and there are no problems. I just want to be sure that this thing WILL do the trick, i really want my subs to sound like they did in my old car.
Thanks in advanced!
-Tom
*Note: The speaker level converter is the blue device located at the top of the picture in the middle.
I got the AOEM-NIS2 and the sound was 100x better. You'll be happier with it.
Thread
Thread Starter
Forum
Replies
Last Post