FLO_BOY

hey --

what did you attach the REMOTE TURN ON wire to in your car?
did you do what RedMax did and wire BOTH the power wire and the REMOTE
wire to a switch??? I'd like to not do that...Has anyone wired in a relay???
What type of relay did you use?

THANKS!!!
FLO_BOY

1MAX2NV

iTrader: (5)

I don't have one....but why not wire it to the headunit's remote turn on?

Igor911

iTrader: (10)

Thats what I said to myself when I read his post

FLO_BOY

well, I was thinking of wiring it to the AMP REMOTE TURN ON, but,
should the power wire go straight to the battery??? or ???

need some help...

THANKS!!!
FLO_BOY

Chitwista

If you go straight to the battery (without a switch) the unit will always have power.. But if you go to the remote turn on lead of the h/u, the monitor will only power up with the h/u, and turn off when you turn off your radio..

1MAX2NV

iTrader: (5)

Power to ACC +12V.
Remote turn on to Headunit's remote turn on.

FLO_BOY

thanks.

so, I'm gonna hook up the power wire to the ACC12V wire,
and then hook up the screen's "+ive turn on" to the HU's "external amp control lead" (that turns on the amp when the unit powers up).

To be honest, I am making an assumption...as I don't have a "remote turn on" labelled in the HU's wiring diagram...

I hope I'm not freaking any one out, I'm actually pretty handy...I'm just getting a li'l nervous as this is gonna be a big install...

FLO_BOY

Redmax

iTrader: (20)

Do not connect it to the amps turn on if you have more than one amp hooked up. because you don't want too many things connected to that lead. connect the screen to constant power at the radio and then put a switch on it

TEEdotMAX

iTrader: (2)

OFF TOPIC... will redmax's screen fit into a 00 max??? lots of customizing needed??

FLO_BOY

only one amp...and the screen. I'd like to avoid having a switch.
BUT, if this is not OK, I'd appreciate advice saying as much...

thanks,
FLO_BOY

1MAX2NV

iTrader: (5)

Typical headunit remote turn will have enough current to "turn on" 3 amps. You could always wire a SPDT relay then you will have 30AMP worth of turning power. That way you could turn on 100 amps if you want.

TravisC

Yeah, lots of customizing, I'm working on it right now. There is also another thread for screens in a 5th gen. I've just gotta paint mine and I'll be posting pictures so watch for it.

BORQUA79

So that Orange wire turns on the unit and the red keeps the constant juice on? So when the HU is on then the screen is on? Because Id rather not have the screen on unless I have a Movie on... I figure the screen being on all the time isnt cool for the screen. Im confused any help please? Oh and having both the red and orange together like Red said is together on a toggle switch?

erty67

iTrader: (104)

I just left the remote lead disconnected and I turn it on and off using the remote.

BORQUA79

Thanks Erty67 I think I'll just use the remote control for now... but If I use the Cigarette Lighter Power could It still be functional as a Lighter?

erty67

iTrader: (104)

I don't see why not. To be honest, I have mine wired to the radios power wire. I spliced the constant into the radios constant, and the screen's remote turn on to the radio's ignition, but I disconnected it later on to use the remote for turning it on and off.

BORQUA79

Ok that sounds good... So I have that option Im just nervous to start splicing stuff all over the place what did you use for a ground? But I like the "just using the remote control" Idea...

Now I just have to find a way to cut out an opening in my armrest compartment to put the DVD palyer... I guess Im using a dremel or sumthing?

erty67

iTrader: (104)

i grounded to a bolt somewhere under the dash. I don't remember where though.

BORQUA79

Great now Im set... Lets see what happens... Thanks