Radio w/o sound after disconnecting battery & how do I get sound back???

Subscribe
Aug 24, 2004 | 10:17 PM
  #1  
I disconnected my Negative battery terminal when changing a knock sensor & O2 sensor, now my radio comes on but there is no sound despite being on a known local station. No sound from AM either, but digital tuner works. Basic Nissan tape deck AM/FM stereo? Any Ideals? I disconnected both terminals for an hour then reconnected w/o any luck? Antena goes up & down with turning radio off & on, checked for blown fuses but all look good.

Appreciate any imput,
Thanks

Brian
Reply
Aug 24, 2004 | 10:41 PM
  #2  
This may sound like a smart a.s.s suggestion, but have you tried adjusting the volume?
Reply
Aug 25, 2004 | 04:44 PM
  #3  
Yes, of course, but no sound from speakers at all
Reply
Aug 26, 2004 | 10:03 AM
  #4  
Check your fuse. I had that problem before with a HU i installed.. and it burned out a fuse in my fuse panel.. I sent the HU in took me 6 months to figure it out. lmao letme no how i turns out..
Reply
Aug 26, 2004 | 05:34 PM
  #5  
fuses okay
fuses okay too, replaced just in case & no improvement
Reply
May 12, 2005 | 09:55 PM
  #6  
Radio, shot, ended up replacing w/ pioneer system
Reply
May 18, 2005 | 01:53 AM
  #7  
Sorry for that sarcastic reply earlier, but here's another one for good measure. Kinda a long diagnosis process eh? j/k
Reply
May 18, 2005 | 05:16 PM
  #8  
is the set coded, as in having to enter a security code. i come across this quite regular here in the uk. the set works but no audio.
Reply
Subscribe