Any nice stereo systems at the July 10 NJ area meet?
#1
Any nice stereo systems at the July 10 NJ area meet?
I love my Maxima to death, but I could honestly care less about mods and stuff at this point. The last think I really need is a new expensive hobby....so I wouldn't really go up to check out nice Maximas....
I would, however, show if there was going to be some stereo enthusiasts there and some nice systems to listen to.
Anyone going?
PS...what does a man have to do to get permission to post pics (notlinks) directly in a post? I got some rough in progress install pics, my ECA site isn't letting me upload now.....
I would, however, show if there was going to be some stereo enthusiasts there and some nice systems to listen to.
Anyone going?
PS...what does a man have to do to get permission to post pics (notlinks) directly in a post? I got some rough in progress install pics, my ECA site isn't letting me upload now.....
#2
Originally Posted by BBOYSTEVIE
I love my Maxima to death, but I could honestly care less about mods and stuff at this point. The last think I really need is a new expensive hobby....so I wouldn't really go up to check out nice Maximas....
I would, however, show if there was going to be some stereo enthusiasts there and some nice systems to listen to.
Anyone going?
I would, however, show if there was going to be some stereo enthusiasts there and some nice systems to listen to.
Anyone going?
#3
Originally Posted by BBOYSTEVIE
PS...what does a man have to do to get permission to post pics (notlinks) directly in a post? I got some rough in progress install pics, my ECA site isn't letting me upload now.....
[IMG]URL LOCATION OF THE PIC[/IMG]
#4
Manny as in MannyNJ2k2max ? He said his is in progress. I don't hang here much, but I'm quickly learning that you, metal maxima are apparently somewhere in the realm of installer/dealer/enthusiast/audiophile ? Got a link to your install(s). What do you deal in..
Were you the one that had "*****" where otherwise the ashtray and lighter would be? What year was that in? Was that custom or a trim kit you can buy?
Were you the one that had "*****" where otherwise the ashtray and lighter would be? What year was that in? Was that custom or a trim kit you can buy?
#5
Originally Posted by BBOYSTEVIE
Manny as in MannyNJ2k2max ? He said his is in progress. I don't hang here much, but I'm quickly learning that you, metal maxima are apparently somewhere in the realm of installer/dealer/enthusiast/audiophile ? Got a link to your install(s). What do you deal in..
Were you the one that had "*****" where otherwise the ashtray and lighter would be? What year was that in? Was that custom or a trim kit you can buy?
Were you the one that had "*****" where otherwise the ashtray and lighter would be? What year was that in? Was that custom or a trim kit you can buy?
My system is pretty modest and looks like so:
- Alpine 9833 HU
- Arc Audio 4150-XXK amp
- Arc Audio ACS 265 Comps
- Rainbow SL 165 Coaxes
- Adire Koda 10" sub - sealed @ 1.0 cubed
- +300sqft sound deadening from Second Skin Audio
- 7" Microvision Monitor
- Cheapo DVD player
- Siriuis Tuner
- Big 3 Upgrade
- Optima Yellow Top
...I would love to meet with everyone at the meet, but my interior is well... in peices at present. ...at least I don't have to worry about anyone breaking in, it already looks that way!
#6
Originally Posted by Metal Maxima
You need to have them hosted somewhere. Then type in the following:
[IMG]URL LOCATION OF THE PIC[/URL]
[IMG]URL LOCATION OF THE PIC[/URL]
#10
Where you live Metal? I'm in Baltimore, MD...Teacher by schoolyear, car audio addict by summer. If you live nearby, come on over, we'll get that shait in
I love waking up to sweet smell of fiberglass
For me right now....
Seas CA18RNX mids in very very well dampened and sealed doors
Fountek Neo 3 ribbon tweets in kicks...need to finish cosmetically, but otherwise done
IDMAX 12v.3...
ESX ampsone temporary old rodek
Eclipse 8053...
Gotta go, libraries closing and haven't gotten net at home yet peace
I love waking up to sweet smell of fiberglass
For me right now....
Seas CA18RNX mids in very very well dampened and sealed doors
Fountek Neo 3 ribbon tweets in kicks...need to finish cosmetically, but otherwise done
IDMAX 12v.3...
ESX ampsone temporary old rodek
Eclipse 8053...
Gotta go, libraries closing and haven't gotten net at home yet peace
#17
manny cant wait to hear the mids
metal max - come anyway it'll be fun
don will be there, and knowing him his system will be installed
hopefully mine will be done in time:
progress:
eclipse avn 5435 - done
knu 1/0 wiring - done
rainbow slc 165 - installed not powered
arc kar 400.4 - purchased
arc kar 900.1d - purchased
arc kar 12d4 - purchased
soo...basically i have to build a trunk
metal max - come anyway it'll be fun
don will be there, and knowing him his system will be installed
hopefully mine will be done in time:
progress:
eclipse avn 5435 - done
knu 1/0 wiring - done
rainbow slc 165 - installed not powered
arc kar 400.4 - purchased
arc kar 900.1d - purchased
arc kar 12d4 - purchased
soo...basically i have to build a trunk
#18
Alrighty, I'm gonna see what I can do. Manny and Pearl's systems sound worth the trip. My install is also a work in progress, but at least at a point where it's playable and sounds good. right when I think I have it tuned, I either end up needing to off my power wire (ending settings on 8053) or decide it can be better.
Pearl that install would have taken me a lot more than a weekend. Great job....
Luckily, I have a nice guy nearby who happens to have an audiophile ear and be a Iasca Pro champ, so once everything else is installed and up to par, I'll just go to him and copy down his settings....
Pearl that install would have taken me a lot more than a weekend. Great job....
Luckily, I have a nice guy nearby who happens to have an audiophile ear and be a Iasca Pro champ, so once everything else is installed and up to par, I'll just go to him and copy down his settings....
#20
Originally Posted by BBOYSTEVIE
Alrighty, I'm gonna see what I can do. Manny and Pearl's systems sound worth the trip. My install is also a work in progress, but at least at a point where it's playable and sounds good. right when I think I have it tuned, I either end up needing to off my power wire (ending settings on 8053) or decide it can be better.
Pearl that install would have taken me a lot more than a weekend. Great job....
Luckily, I have a nice guy nearby who happens to have an audiophile ear and be a Iasca Pro champ, so once everything else is installed and up to par, I'll just go to him and copy down his settings....
Pearl that install would have taken me a lot more than a weekend. Great job....
Luckily, I have a nice guy nearby who happens to have an audiophile ear and be a Iasca Pro champ, so once everything else is installed and up to par, I'll just go to him and copy down his settings....
#21
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,671
Originally Posted by MannyNJ2k2max
yeah some nice things to hear...some high line Rainbow tweets, some Illusions and Morel 8's, heck to hear the Flatlines in Don's car is worth the trip....some products you dont hear/see of everyday
#23
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,671
Originally Posted by MannyNJ2k2max
no luck troubleshooting?
Anyways I'll be over early tomorrow....
Anyways I'll be over early tomorrow....
BUT...now I got a problem with the 8....
#28
Originally Posted by Pearl96Max
Thank you
No wheres the damn PM you keep asking me to answer? Ya know ya gotta press send first right?
No wheres the damn PM you keep asking me to answer? Ya know ya gotta press send first right?
#32
Can't make it tomorrow.
Broke HU (replacement on the way...2 CD's at once is a bad thing ) so dash is pulled apart and is staying that way for a week, as I'm doing a lot of rewiring/routing/fusing junk back there, I figure I'm going to take the time, get it done, get my new HU, put it in, and have everything good and clean and how I want it.....
I will definately be at the ECA meet the 24th and Metal Max and any other diehard car audio nuts, keep in touch and I may be up for meeting/swinging by sometime if you're not too far away.
Broke HU (replacement on the way...2 CD's at once is a bad thing ) so dash is pulled apart and is staying that way for a week, as I'm doing a lot of rewiring/routing/fusing junk back there, I figure I'm going to take the time, get it done, get my new HU, put it in, and have everything good and clean and how I want it.....
I will definately be at the ECA meet the 24th and Metal Max and any other diehard car audio nuts, keep in touch and I may be up for meeting/swinging by sometime if you're not too far away.
Thread
Thread Starter
Forum
Replies
Last Post
Violator
4th Generation Classifieds (1995-1999)
1
09-09-2015 10:14 AM
Hdnseek
5th Generation Maxima (2000-2003)
3
09-09-2015 05:55 AM
carid
Group Deals / Sponsors Forum
0
09-09-2015 05:06 AM