Yeah, that's right. I'm kicking around the idea of making an insanley ornate fiberglass trunk with 4 10" subs that will no doubt drive me to the brink of insanity one its started. I am looking for recommendations on subs/amps that would be a nice even mix of SQ/SPL...keep in mind there will be 4 of them in there.

Just an idea I am kicking around...

 

i would say the polk momos. They take an idiotically sized box and could be purchased pretty cheapley online. Theres an offer on crutchfield to buy 3 get one or buy 4 get one, something like that. Would allow you to go with a common chamber box ad save on alot of hassle.

 

looks like theyve cancelled that
Specials

 

Well, the subs would be mounted in 4 small individual chambers, or maybe 2 per side. Good look-out, though.

 

get some jl 10w0's.

 

4 10" ID max's haha or 10 inch ID q's

 

Nah, some Arc's (I'm sure they have 10's in the line), IDQ's, ED's mid line (forgot the letter). There's some good sq 10's out there that will deliver (especially when you have four of them)...Ohh how bout Dayton Reference 10's?

 

any decent 10" x4 will give you the spl and sq you need. its not quite the displacement of 2 15's of the same sub, but close enough to get the output you are lacking. more subs=less distortion due to less excursion=more sq. more subs=more spl.

edit: also you may need to pick a different amp based on your sub slection and impedence loads. id try to figure out what subs then get a new amp pending on how big your sub amp is right now. i like the AA assassin series coming out.

http://ascendantaudio.com/

 

I would say 4 pioneer 10s because of quality and low price, w/pioneer class d amp. Same with mtx, get the base 10s and a mtx class d. You could also look into Infinity 10s.

If you want to go with 2 class d amps, go with subs that are single 4 ohm vc. If you only want to go with one amp then get subs that are 4ohm dvc.

 

he said quality subs not junk pioneer by far has ne sq whatsoever for the price of the pioneers u can get some jl's that will smoke them

 

four RL-i' 10s. they work well in small enclosures, and doesn't take much power to get them pounding (and sounding accurate while doing it)

 

i dunno to this very day my impp pioneer subs had solid sq for the price. however, when you have more than $50 to spend on a speaker there is no comparison. box design plays a bigger role in subs than people think.

 

Thanks for all the suggestions, guys...keep throwin' em at me!!!! Do you have a link to the site for these subs?

 

http://www.soundsplinter.com/rli_ign...r_drivers.html

 

http://edesignaudio.com/product.php?...pid=32&cur=USD

these look nice there only 7's but i have heard good things about them and there not that expensive and you could go with a few more than 4.

 

No. i know its not a good reason why not to...but other people can chime in.

 

hit the link slickrick provided. Mike over at SS recommends the RL-i 10s to be in a .4 to .8 cu ft sealed, and be fed up to 350 watts. these subs are more so geared towards SQ though, just food for thought.

 

i say no matter what subs you go with, 4 10's will yield plenty of SPL...so might as well go for Sq

better questions...what you gonna power them with? whats your budget per sub?

I would look into Diamond D3, perhaps Don will give you break on the Arc v2 subs, maybe IDv3's, perhaps some Rainbow subs left over at Arc (call Don) at insane clearance prices....as Steve mentioned DIY subs as well.

 

All good suggestions.

 

How much you looking to spend on each 10?

 

O Audio is closing out the TC Sounds TC2+ 10's (4ohm DVC) on sale for $99 each. Same driver as the SS RL-i with slightly different T/S parameters.

-Robert

 

4 alpine R's. 2005 models of course

 

lol almost everyone is biased with what you should choose, but so am i, id say go for Eclipse aluminum 10's, great spl, and even better clarity and SQ, plus they look awesome, i garuntee you wouldn't be dissapointed



http://www.eclipse-web.com/sw7100/sw7104.html

other than that id agree with diamonds, i have got a chance to listen to some myself and they're pretty tight sounding(as opposed to loose, not slang) subs

 

well depending on cost i would go with JL, image dynamics, or those diamonds

 

Quick question...Is the only reason you are doing 4 10's because of the cool box design you have?

 

i say idq's

 

Don't hate, if the system is on a budget for 4 10s I said pioneers because of quality AND PRICE. If it was an all out sq competition I wouldn't mention them, I would probably say get Selenium. But if he has $500 or more to spend on 4 10s, more power to him. I would jump on the JL bandwagon but there wasn't anymore room.

 

or if you wanted too. any re 10 would be nice as well

 

i was saying jls because w1's are cheap just like the pioneers and IMO sound way better than the pioneers. no bandwagon here i worked for a shop that sold all JL stuff and the only jls i would buy would be w1's the rest are retarded expensive and not worth the money, especially w7's

 

MTX 7500s or higher are my pick w/ a Class D MTX amp.

 

Arc V2s,Alumapro MX/RXs, Rainbow, DLS, DA,etc O wait those are all lines that I sell. LoL I guess Im a bit biased too.

 

Yes. But I will wind up selling the enclosure I have now once this starts...

DON, I was waiting for you to come in. What would you recommend that would work well for what I am looking for? I guess I would want to spend around $600 for the 4 subs, we'll talk about the amps later. I DON'T want something that power-hungry that'll require me to get some insanley priced amp.

 

Im sure we can fity something within that budget. Of course for the amp my first intuition would say a 2500XXK just to keep thing uniform with your 4150.

Give me a call and we can figure something out, or just leave me your number again.

 

I will give you a call/PM either this week or next.

 

Not a problem, ya know Ill be here.

 

Some Alumapro MX's would be real nice! I have a set sitting in my room right now they are a very fast accurate sub!

 

Yea but he wants for 10s, you have a pair of twelves.

You bought the MXs from Derrin? Or your just holdin on to em for now?

 

Im just holding on to them for now I havent decided what I want to do yet. I have the RX's sitting in my room as well lol I havent had time to put anything back in my car.

 

I've heard through the grapevine that the Genesis subs rawk too! Did you get my PM bout the Dyn MW 160's?

 

I couldn't find any jls for under $90 a piece. What's the going price for w1s?