i have 2 10" mtx thunders i got recently and i finally got around to buying the mtx dual 10 box for them. the subs did not come with anything at all...just the sub itself. how do i mount them in/on the box or whatever? any sites/pictures would be appreciated. (i got 3rd gen with bose if needed)

 

First you need to make sure you have wire going from whatever terminals are on the box, to the terminals on the sub. Then use one screw in each screw hole to mount the subs. If holes are not pre-drilled, then do the drilling. It will pay off if you ever remove the speakers.

 

Pre-drill a hole half the size of your screws. use large, short wood screws (ace hardware/home depot, etc).