NY E-MANAGE ULTIMATE with Plug&Play PATCH HARNESS
E-MANAGE ULTIMATE with Plug&Play PATCH HARNESS
Emanage Ultimate with Plug play harness. $450 Paypal and will be as is shipped with the box, + the FULL COLOR install guide with pin outs, explaination of functions etc from the FAQ here on the org. this applies for A32 and A33a.
Also I will give you a website to download the newest version of the firmware/software for the computer connection. One USB cable will be provided for PC access.
This was used on a 96 i30t 5spd. I removed it to shorten the wires, and then the car was involved in an accident as some may remember. I never got back to installing it. Now it is for sale along with my Super charger setup and DE-T components. E-manage Ultimate is in NEW condition used shortly.
This will work with other years and automatics. however refer to the included FULL COLOR diagrams and instructions to make it work with your options etc. I will provide the Pin Diagram with Pin-out list that I used to compile the harness.
The harness has resistors soldered into to prevent coil burn out.
The patch harness is custom made from the Female connector of a ECU, and the male connector of an Engine harness.
Pic for reference below. (the loose wires are where the wideband, and few other options tap in.)
Please do not contact me if you do not have funds. It is very frustrating.
EMAIL: DO NOT PM ME!!!!(the pm box gets full fast)
Txt ME: DO NOT CALL ME!!! (this is the best method)
Please make clear what it is you want when texting /emailing.
Also I will give you a website to download the newest version of the firmware/software for the computer connection. One USB cable will be provided for PC access.
This was used on a 96 i30t 5spd. I removed it to shorten the wires, and then the car was involved in an accident as some may remember. I never got back to installing it. Now it is for sale along with my Super charger setup and DE-T components. E-manage Ultimate is in NEW condition used shortly.
This will work with other years and automatics. however refer to the included FULL COLOR diagrams and instructions to make it work with your options etc. I will provide the Pin Diagram with Pin-out list that I used to compile the harness.
The harness has resistors soldered into to prevent coil burn out.
The patch harness is custom made from the Female connector of a ECU, and the male connector of an Engine harness.
Pic for reference below. (the loose wires are where the wideband, and few other options tap in.)
Please do not contact me if you do not have funds. It is very frustrating.
EMAIL: DO NOT PM ME!!!!(the pm box gets full fast)
Txt ME: DO NOT CALL ME!!! (this is the best method)
Please make clear what it is you want when texting /emailing.
Last edited by HomerMAC; Aug 13, 2020 at 11:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MOHFpro90
General Maxima Accessories (All Generations)
110
Feb 28, 2020 05:59 PM
HomerMAC
4th Generation Classifieds (1995-1999)
8
Oct 18, 2011 10:34 AM