The 5.7 gen Maxima Latest dyno= 301.58HP 277.27 TQ Closed cutout, stock cams.....
 

Yeah its real.

WHY AM I THE ONLY 5.7 gen????????????????


Enough with the dyno's, its time to get this 5.7 Gen on the track now!


STD= 301.58 / 277.27

SAE= 294.99 / 271.22



This is with a 4" intake setup!

Also with the stock cattman ypipe, which i beleive hurt power quite a bit. I'm undecided if putting other ypipe back on or not. Id rather have a whole new header setup.


Red is todays run. Blue is last time best run.

Changes from then to now is stock cattman ypipe. and 4" intake. and tuning.

Attachment 50275





ill post more of my findings tomorrow ( was on the dyno for 4 hours, done a ton of pulls) but short run is 4" intake pipe, a must. tuning cam timing a must , and AFR 12.8-13.0 is not where my motor makes most power.







Attachment 50276

3.5" intake vs 4"




Attachment 50277

This is old run, 15 is 3.5 intake with unequal length ypipe.
Run 39 is 3.5 intake with stock cattman ypipe but with a lot better tuning.

I beleive the unequal length ypipe on this better tune would make more power. BUT it makes the car sound totally different, very loud , it gets old very quick. But the bigger size piping is def worth some hp.

Whats really needed is some better headers in general tho. These are way to short and small.









Attachment 50278

Cam timing tuning. Messed around a little. 20 21 is Intake adjustments only, 23 is exhaust adjusted also.

Had great gains, at 5500 rpm 11hp and 10ftlbs.

CAM timing ONLY. WHAT are YOU TUNED WITH? //////////////////






MOD LIST at time of dyno runs!

5.7 Gen Mod list:

Engine-
- 2009 Maxima VQ35
- 75 mm Throttle body
- Composite intake manifold (first one SSIM'd)
- 52 mm intake ports on heads
- 10.6:1 Compression
- 09 stock cams
- 380 cc DW injectors
- ARP rodbolts
- ACL Race bearings
- Cattman genIII headers
- Cattman 3" catback
- Cattman genIII ypipe, w/3" test pipe
- Removed stock oil warmer
- 4" Intake Piping
- Velocity Stack
- 6" AEM Dryflow Filter
- 4.133 Final drive
- Fidanza flywheel
- Spec stage 3 clutch

Engine Management-

- Haltech 350Z ECU
- VoltageDrop.net Plug and Play Haltech harness
- Haltech Dual channel Wideband
- Dual channel wb gauge
- Exhaust Valve Timing ran by Haltech only

well there it is lol

mmmmmmmm mmmmmmmmmmmm mmmmmmmmm

lurkers..lmao



Currently Active Users Viewing This Thread: 7 (4 members and 3 guests)
datdude20, blackmaxftw, Jay_pee99+, PrinceDrew00

hahaahah

graph is up

make me want to do the sway even more smh

anyone else have stuff to share? I sure do share a lot :confused::confused::confused:

You are envied by many for this one...especially me! great work

haha that's not why i post!


I post to show the 09 motor swap is the way to go! Its been allmost a year and im still the only one.

I want there to be a lot of cars like this. I REALLY want someone to put a set of aggressive cams in this motor!

This forum is about sharing info and helping others out. Not about having a one up on another Maxima. That's just stupid and I will not stand for it.

Ive never been to the track, so any fast cars don't worry about my track times. Well for now :D

:confused:...what do u mean? ur in a league of ur own with this.

not really. I'm not the only one messing with maximas, going to dyno, tuning.

Awesome numbers Darren!!! As for the track i say 12.50's with a good 60ft and some super fast shifting. Need in car vids asap

Yeah, its pretty safe to say its Maxed out now. Without changing something major (cams, headers, intake) i don't see much more power.

omgyes

Man I wish this car was in MD.

haha why???


Id sell it for the right price!!!


Then build another lol, next time CAMS!

Congrats man.

Any runfiles ?

So we can get it on one of our tracks! Plus I want to check out the setup in person.

oh yeah about 40+ of em hahaah


I'm planning on going to the meet in NY this summer! Are you?

Need a maxus back in md/va/dc or even nc or tn.

Load up the files and post them. Highly curious

Maybe when the price of those engines drop there will be more lol. That's a lot of dough to drop...considering for not much more you could have a pretty decent turbo setup.

But all things aside those are awesome numbers. I'm definitely curious to see what kind of 1/4 mile times that could turn.

What's the cost of a VQ35 from a 7th gen?

YES!!! Thats good to know. Finally be able to meet you in person. I'll be at the NY meet as well!! Then you can see the turbo, it'll be done by then.

I believe you can get a decent one for about $2200-$2400.

Junkyard- 1500-2500


Seen one on ebay for 800...........





You CANT NOT rebuild a older vq for that price and even get the same power!


ITS A NO BRAINIER

Since the new VQ37 engines have come out those 7th gen VQs get cheaper and cheaper......might even see a Maxima with a VQ37 swap one day???? Who knows......

If they make a FWD version yep!

Really want i want to see is Direct Injection VQ35.

Wow!

What are the sizes of the cattman y pipe and your other y pipe?
And what AFR does your motor make the most power at?

where is manny

One word: Hotness. All I'm gonna say.

Hopefully the price of the goes down even more. I would love to pick one up later down the road and see what it can hold with f/i.

But not bashing on you or the swap since I think it is great but the reason I think personally that people have not done the swap is due to the price of the complete package. When you factor in the motor, the headers ( not needed but are a good idea ) haltech, and etc the price of the swap goes up very quickly.

BTW any pictures of your new intake set-up and any dyno run vids?

:ben:

Saw this on my phone before bedtime last night. I let out a gaaagghh!!! @#$@!#%, and the wifey was like :wtf: ... And i said, 300hp She turned off the lights and went to bed.

I said the faster I hit the hay, the faster I'lll be on here to see this in detail.

Wow, that's the only words to describe this journey. Cripes, a 4" intake, that's insane, but, again, outside the box from conventional thinking, something that is always welcomed. This is MAFLESS, correct, so, obviously no MAF housing debacle, and probably smoother tuning due to the nature of a MAP sensor.

I would also like to see what AFR and timing (static, non VVT) curves were used to achieve that.

What I've seen/found, less timing @ torque peak seems to be the ticket, but, I have no control over mine, it's just the way my curve(Timing) is (lowest timing @ peak torque #).

Can't wait to hear/see details!

Thanks fro sharing all the info Darren, it's priceless.

Daaaaaaammmmmnnnn!!!!!!!!

Any thoughts on how the internals would like it if you revved it out to 7500? That thing would stay in the ~300hp powerband at every shift. (Actually, it probably does already with the 6 speed) I wonder where the power starts to fall off.

Correct me if I am wrong but I remember darren saying that the oil-pump would be an issue with revving the motor higher.

Way to go Darren! I might need to do another engine swap in my 92 Maxima. :D

As always, thanks for sharing and doing this.

4'' ftw. I'm going to get one on order and use this for the maf: http://www.treadstoneperformance.com...+Hitachi+Style I'll probably add the Add honeycomb airflow straightener even if it kills a hp or three. Not sure how it installs in the tube though...better not just be a square piece of screen cut out.

How long is the intake tube to the filter?

It looks like the cams are holding the engine back after 5.7k. I bet you would gain 30 whp with some aggressive cams, you know you want some C9s...I would love to see it rev'd out to 8k on C9s...should be insane and sounds amazing as well.

So basically around 5k or a little less to do this swap with Hal emu right? Engine 2kish delivered, hal $2000, wire harness and misc stuff $500-$1000.

Buy an 80'' tv or 300whp maxima. decisions decisions...



edit: Why did you change y pipes? I would love to see a dyno now with the 3'' unequal length Y and see the difference.

Attachment 50197




Comparing to Jay P maxima.


Not really a far comparison but its neat.


His car is camed with small intake piping

Mine is 09 motor with stock cams, 4" intake.

What cams is he running? What does he tune with?