FS: VQ35 Turbo Kit
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (24)
Join Date: Apr 2006
Location: Sagamore Beach, MA
Posts: 694
FS: VQ35 Turbo Kit
I bought this kit off of Pimpjuice and have to sell it now due to some financial issues. This kit came off a 2002 Nissan Maxima with a 6 speed. I did get to the point of test fitting it on my 2000 GLE and the hot side fit fine so it will fit an automatic. The only issue I had was that there was no intercooler included with the kit and apparently there never was an intercooler fitted on the car (strange, but true). However, I do have an intercooler and a bunch of spare piping that I will include. From test fitting I know that you will only need a straight section of piping to make it work, but I will include 2 90 degree bends, 2 45 degree bends, 2 180 degreed bends, 2 straight sections, and a few extra couplers just in case you want to change things up. The kit requires that you remove the two precats, but relocates the 02 sensors to the main cat so you will not have any codes. I am including the 02 sensors which already have the wires extended so everything will bolt right up. Piping places the MAF on the non charged side (before the turbo). The intercooler piping is close to the turbo, but I am including a heat wrap for that section of intercooler piping as well. I will also include a brand new battery relocation kit to relocate the battery to the trunk. You will literally have everything that you need to install this kit on your car and everything is in great shape. Feel free to PM me with any questions or call me at 774-313-7191. I am looking for $2300 plus shipping.
The kit includes:
All oil lines and fittings (absolutely everything needed)
T4/60-1 Hi-Fi Polished turbo
Tial 38mm Wastegate
HKS SSQ BOV with recirculation fitting
Godspeed project FMIC (will fit without removing bumper support)
3" CAI (places in fender off turbo)
3" Downpipe
Reverse Y pipe feed pipe
Catalytic converter with relocated O2 sensors
Brand new battery relocation kit from Summit Racing
All hot side piping coated in DEI High Temp Silicone paint
Pics:
Reverse Y pipe and turbo
Intercooler, piping, and SSQV Blow Off Valve
Downpipe with Tial 38mm wategate and wideband 02 bung (getting coated tomorrow)
Catalytic converter with relocated 02 sensors
The kit includes:
All oil lines and fittings (absolutely everything needed)
T4/60-1 Hi-Fi Polished turbo
Tial 38mm Wastegate
HKS SSQ BOV with recirculation fitting
Godspeed project FMIC (will fit without removing bumper support)
3" CAI (places in fender off turbo)
3" Downpipe
Reverse Y pipe feed pipe
Catalytic converter with relocated O2 sensors
Brand new battery relocation kit from Summit Racing
All hot side piping coated in DEI High Temp Silicone paint
Pics:
Reverse Y pipe and turbo
Intercooler, piping, and SSQV Blow Off Valve
Downpipe with Tial 38mm wategate and wideband 02 bung (getting coated tomorrow)
Catalytic converter with relocated 02 sensors
Last edited by nismomaxct; 01-29-2009 at 07:47 PM.
#5
Supporting Maxima.org Member
Thread Starter
iTrader: (24)
Join Date: Apr 2006
Location: Sagamore Beach, MA
Posts: 694
Lol. Always the way things go. I am sure you are going to be happy with the supercharger. When are you installing it? Let me know and I will come down and check it out. Your brother ever find a car? Can't wait to see the car when it is finished.
#9
As for my brother, he still hasnt found a car yet, came pretty close to buying an 03 6spd down in Connecticut, dark grey, 98k miles, tan leather interior, dropped, '09 Maxima wheels, MT lip, all for $4500, but the car was in a major accident and rebuild so it was a no-go.
Bump for you Chris!
#10
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Join Date: Jan 2008
Location: Greensboro, NC
Posts: 3,468
Interesting reverse ypipe, where exactly does the turbo end up positioned? Did he send you any pics of all this installed? Let me know if you part out I'd be interested in the hotside piping.
#11
Supporting Maxima.org Member
Thread Starter
iTrader: (24)
Join Date: Apr 2006
Location: Sagamore Beach, MA
Posts: 694
Here are pictures of the kit installed. Theres lots of them.
Last edited by nismomaxct; 02-03-2009 at 11:30 AM.
#14
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Join Date: Jan 2008
Location: Greensboro, NC
Posts: 3,468
I'm very interested in buying the reverse Ypipe and the downpipe. I'd just change the flanges for the turbo I'm running. Send me a PM with shipping to 27455 and we can go from there?
You used stock 5.5 gen exhaust manifolds with this, correct? I have cattman headers/Ypipe so wouldn't mind using my stocker stuff and then selling the headers.
You used stock 5.5 gen exhaust manifolds with this, correct? I have cattman headers/Ypipe so wouldn't mind using my stocker stuff and then selling the headers.
Last edited by sparks03max; 02-03-2009 at 02:07 PM.
#15
Supporting Maxima.org Member
Thread Starter
iTrader: (24)
Join Date: Apr 2006
Location: Sagamore Beach, MA
Posts: 694
I'm very interested in buying the reverse Ypipe and the downpipe. I'd just change the flanges for the turbo I'm running. Send me a PM with shipping to 27455 and we can go from there?
You used stock 5.5 gen exhaust manifolds with this, correct? I have cattman headers/Ypipe so wouldn't mind using my stocker stuff and then selling the headers.
You used stock 5.5 gen exhaust manifolds with this, correct? I have cattman headers/Ypipe so wouldn't mind using my stocker stuff and then selling the headers.
#17
Supporting Maxima.org Member
Thread Starter
iTrader: (24)
Join Date: Apr 2006
Location: Sagamore Beach, MA
Posts: 694
This is the kit on the person before me. I was in the process of installing the kit on my car when my wife totalled her car last week and we still owe money on it so I need some cash. I got around to test fitting the hot side on my car and it fit with no problems.
#19
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Join Date: Jan 2008
Location: Greensboro, NC
Posts: 3,468
You'll see a slightly earlier spool with stock manifolds but better top end flow with the headers. You'll need the stock manifolds with this kit unless you modify the piping.
#23
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM